Search results for "Short circuit"
showing 10 items of 39 documents
Outdoor Performance of 10 year Old a-Si and Poly-Si Modules in southern Norway conditions
2012
The outdoor performance of 10 years modules has been measured in southern Norway conditions. For this study, Poly-Si and a-Si modules are selected and the measurements are carried out using a portable electronic load. The I–V characteristics and maximum power have been recorded for several modules of each technology. It is found that Poly-Si modules perform very well even after 10 years of span whereas some of a-Si modules have visual degradation which causes significant power losses. The experimentally outdoor monitored values of P mp , V mp , short circuit current (I sc ), Open circuit voltage (V oc ) and efficiency for different modules are compared with manufacturer's values.
CIGS PV Module Characteristic Curves Under Chemical Composition and Thickness Variations
2014
This paper analyzes how the electrical characteristics of a CIGS photovoltaic module are affected by the chemical composition and by the thickness variations of the CIGS absorber. The electrical characteristics here considered are the short circuit current, the open circuit voltage, the efficiency and the power peak. The chemical composition is varied by tuning the ratio between gallium and indium. This analysis has been performed by means of the wxAMPS software, developed by the University of Illinois. The above variations have been taken into account on a PV module made of 72 cells. This analysis has been carried out employing a PV module mathematical model developed and implemented by th…
Tuning optical/electrical properties of 2D/3D perovskite by the inclusion of aromatic cation
2018
The employment of bulky aliphatic cations in the manufacture of moisture-stable materials has triggered the development and application of 2D/3D perovskites as sensitizers in moisture-stable solar cells. Although it is true that the moisture stability increases, it is also true that the photovoltaic performance of 2D/3D PVK materials is severely limited owing to quantum and dielectric confinement effects. Accordingly, it is necessary the synthesis and deep optical characterization of materials with an adequate management of dielectric contrast between the layers. Here, we demonstrate the successful tuning of dielectric confinement by the inclusion of a conjugated molecule, as a bulky cation…
Field Reconstruction for Modeling Multiple Faults in Permanent Magnet Synchronous Motors in Transient States
2021
Conventional field reconstruction model (FRM) for electrical machines has proved its main strength in efficient computations of magnetic fields and forces in healthy permanent magnet synchronous machines (PMSM) or faulty machines in steady states. This study aims to develop a magnet library of different magnet defects and include inter-turn short-circuit (ITSC) in the FRM for PMSM. The developed FRM can model a combination fault between ITSC, and magnet defect in a PMSM in transient states. Within the framework, an 8-turn ITSC was modelled in both finite element analysis (FEA) and FRM, and then identified by the extended Park’s vector approach. The air-gap magnetic field reproduced b…
Experimental characterization of Ruthenium-based Dye Sensitized Solar Cells and study of light-soaking effect impact on performance
2016
In this paper, we present an experimental investigation on the performance of Ruthenium-based Dye Sensitized Solar Cells (DSSCs) at different irradiance levels, incident wavelengths and hours of illumination. In particular, the measurements have been aimed at studying the performance variation due to light soaking effect since this phenomenon has noteworthy practical implications, such as stability tests of DSSCs. Our results show that the short circuit current density, the open circuit voltage and the conversion efficiency η increase with the hours of light soaking. Finally, the observed phenomenon is reversible, and thus the performance decreases again when the cell is kept in the dark.
Graded Carrier Concentration Absorber Profile for High Efficiency CIGS Solar Cells
2015
We demonstrate an innovative CIGS-based solar cells model with a graded doping concentration absorber profile, capable of achieving high efficiency values. In detail, we start with an in-depth discussion concerning the parametrical study of conventional CIGS solar cells structures. We have used the wxAMPS software in order to numerically simulate cell electrical behaviour. By means of simulations, we have studied the variation of relevant physical and chemical parameters-characteristic of such devices-with changing energy gap and doping density of the absorber layer. Our results show that, in uniform CIGS cell, the efficiency, the open circuit voltage, and short circuit current heavily depe…
Superior energy density through tailored dopant strategies in multilayer ceramic capacitors
2020
The Gerson–Marshall (1959) relationship predicts an increase in dielectric breakdown strength (BDS) and therefore, recoverable energy density (Wrec) with decreasing dielectric layer thickness. This relationship only operates however, if the total resistivity of the dielectric is sufficiently high and the electrical microstructure is homogeneous (no short circuit diffusion paths). BiFeO3–SrTiO3 (BF–ST) is a promising base for developing high energy density capacitors but Bi-rich compositions which have the highest polarisability per unit volume are ferroelectric rather than relaxor and are electrically too conductive. Here, we present a systematic strategy to optimise BDS and maximum polaris…
Series and parallel resonant inverters for induction heating under short-circuit conditions considering parasitic components
1999
Series and parallel resonant inverters are the common structures in high power industrial generators for induction heating applications. In practical working conditions, short-circuit of the heating coil is very common, normally producing overvoltages that can damage the power transistors of the inverter if no special precautions are taken. The aim of the paper is to show the mechanism of how overvoltages are generated under short-circuit conditions of the heating coil for series and parallel inverters.
Donor/Acceptor Heterojunction Organic Solar Cells
2020
The operation and the design of organic solar cells with donor/acceptor heterojunction structure and exciton blocking layer is outlined and results of their initial development and assessment are reported. Under halogen lamp illumination with 100 mW/cm2 incident optical power density, the devices exhibits an open circuit voltage VOC = 0.45 V, a short circuit current density JSC between 2 and 2.5 mA/cm2 with a fill factor FF &asymp
Nonfullerene Polymer Solar Cells Reaching a 9.29% Efficiency Using a BODIPY-Thiophene Backboned Donor Material
2018
A conjugated polymer donor containing BODIPY-thiophene dyads in the backbone, P(BdP-EHT), combined with a low bandgap nonfullerene acceptor (SMDPP) consisting of carbazole and diketopyrrolopyrrole units linked with a tetracyanobutadiene acceptor π-linker, was used to design bulk heterojunction polymer solar cells. After the optimization of the donor to acceptor weight ratio and solvent vapor annealing of the P(BdP-EHT):SMDPP active layer, the resulting polymer solar cell showed an overall power conversion efficiency of 9.29%, which is significantly higher than that for the polymer solar cell based on PC71BM (7.41%) processed under identical conditions. This improved power conversion efficie…