Search results for "Silicon detector"
showing 9 items of 19 documents
A position sensitive β−γ coincidence technique for sample analysis with the upgraded PANDA device
2020
Abstract PANDA (Particles And Non-Destructive Analysis) is measuring system developed for non-destructive analysis of samples for safety, security and safeguards. The capabilities of the PANDA device were expanded by the addition of a thick silicon detector for β particle detection. The upgraded device can now be used for position-sensitive α − γ and β − γ coincidence measurements of various kinds of radioactive samples. The capability of the PANDA device in using the β − γ coincidence technique was tested using a mixed source of 134Cs and 226Ra. In addition, the ability of PANDA to locate nuclides emitting β particles from samples was tested using a combined sample containing a mixed 134Cs…
α-decay studies of the francium isotopes198Fr and199Fr
2013
Very neutron deficient francium isotopes have been produced in fusion evaporation reactions using ${}^{60}$Ni ions on ${}^{141}$Pr targets. The gas-filled recoil separator RITU was employed to collect the fusion products and to separate them from the scattered beam. The activities were implanted into a position sensitive silicon detector after passing through a gas-counter system. The isotopes were identified using spatial and time correlations between the implants and the decays. Two $\ensuremath{\alpha}$-particle activities, with ${E}_{\ensuremath{\alpha}}=7613(15)$ keV and ${T}_{1/2}$ $=$ (${15}_{\ensuremath{-}5}^{+12}$) ms and ${E}_{\ensuremath{\alpha}}=7684(15)$ keV and ${T}_{1/2}$ $=$…
DEPFET pixel detector in the Belle II experiment
2019
Belle II DEPFET and PXD Collaboration: et al.
The SPEDE Spectrometer: Combined In-Beam γ-ray and Conversion Electron Spectroscopy with Radioactive Ion Beams
2015
The SPEDE spectrometer [1] aims to combine a silicon detector, for the detection of electrons, with the MINIBALL γ-ray detection array for in-beam studies employing radioactive ion beams at the HIE-ISOLDE facility at CERN. The setup will be primarily used for octupole collectivity [2] and shape coexistence studies [3, 4] in Coulomb excitation experiments. In the shape coexistence cases the transitions between states of the same spin and parity have enhanced E0 strength [5]. Additionally the 0→0 transitions, typically present in nuclei exhibiting shape coexistence [6], can only occur via E0 transitions, i.e. via internal conversion electron emission.
A high-resolution PET demonstrator using a silicon "magnifying glass".
2021
Abstract To assist ongoing investigations of the limits of the tradeoff between spatial resolution and noise in PET imaging, several PET instruments based on silicon-pad detectors have been developed. The latest is a segment of a dual-ring device to demonstrate that excellent reconstructed image resolution can be achieved with a scanner that uses highresolution detectors placed close to the object of interest or surrounding a small field-of-view in combination with detectors having modest resolution at larger radius. The outer ring of our demonstrator comprises conventional BGO block detectors scavenged from a clinical PET scanner and located at a 500 mm radius around a 50 mm diameter field…
The Large Area Detector onboard the eXTP mission
2018
The eXTP (enhanced X-ray Timing and Polarimetry) mission is a major project of the Chinese Academy of Sciences (CAS) and China National Space Administration (CNSA) currently performing an extended phase A study and proposed for a launch by 2025 in a low-earth orbit. The eXTP scientific payload envisages a suite of instruments (Spectroscopy Focusing Array, Polarimetry Focusing Array, Large Area Detector and Wide Field Monitor) offering unprecedented simultaneous wide-band X-ray spectral, timing and polarimetry sensitivity. A large European consortium is contributing to the eXTP study and it is expected to provide key hardware elements, including a Large Area Detector (LAD). The LAD instrumen…
The LOFT mission concept: a status update
2016
The Large Observatory For x-ray Timing (LOFT) is a mission concept which was proposed to ESA as M3 and M4 candidate in the framework of the Cosmic Vision 2015-2025 program. Thanks to the unprecedented combination of effective area and spectral resolution of its main instrument and the uniquely large field of view of its wide field monitor, LOFT will be able to study the behaviour of matter in extreme conditions such as the strong gravitational field in the innermost regions close to black holes and neutron stars and the supra-nuclear densities in the interiors of neutron stars. The science payload is based on a Large Area Detector (LAD, >8m2 effective area, 2-30 keV, 240 eV spectral resolut…
Determination of absolute internal conversion coefficients using the SAGE spectrometer
2016
A non-reference based method to determine internal conversion coefficients using the SAGE spectrometer is carried out for transitions in the nuclei of 154Sm, 152Sm and 166Yb. The Normalised-Peak-to-Gamma method is in general an efficient tool to extract internal conversion coefficients. However, in many cases the required well-known reference transitions are not available. The data analysis steps required to determine absolute internal conversion coefficients with the SAGE spectrometer are presented. In addition, several background suppression methods are introduced and an example of how ancillary detectors can be used to select specific reaction products is given. The results obtained for …
Measurements of Low-Energy Protons using a Silicon Detector for Application to SEE Testing
2021
A silicon detector with a fast electronics chain is used for the dosimetry of protons in the range 0.5-5 MeV at the Centro Nacional de Aceleradores (CNA) 3 MV Tandem laboratory in Seville, Spain. In this configuration, measurements can be performed in pulsed mode, using a digitizer to record event-by-event proton energy depositions. The distributions of deposited energy were obtained thanks to a calibration with an alpha source. Measurements of flux and deposited energy are used to enable single event effect (SEE) testing on selected static random access memories (SRAMs).