Search results for "Slag"
showing 10 items of 31 documents
Parasites in the changing world – Ten timely examples from the Nordic-Baltic region
2020
Publisher's version (útgefin grein)
Characterization by solid-state NMR and selective dissolution techniques of anhydrous and hydrated CEM V cement pastes.
2010
International audience; The long term behaviour of cement based materials is strongly dependent on the paste microstructure and also on the internal chemistry. A CEM V blended cement containing pulverised fly ash (PFA) and blastfurnace slag (BFS) has been studied in order to understand hydration processes which influence the paste microstructure. Solid-state NMR spectroscopy with complementary X-ray diffraction analysis and selective dissolution techniques have been used for the characterization of the various phases (C3S, C2S, C3A and C4AF) of the clinker and additives and then for estimation of the degree of hydration of these same phases. Their quantification after simulation of experime…
Prediction of Long-Term Chemical Evolution of a Low-pH Cement Designed for Underground Radioactive Waste Repositories
2012
Low-pH cements, also referred as low-alkalinity cements, are binders with a pore solution pH ≤ 11. They can be designed by replacing significant amounts of Portland cement (OPC) (≥40 %) by silica fume, which can be associated in some cases to low-CaO fly ash and/or ground granulated blast furnace slag to decrease the heat output during hydration by dilution of OPC and improve the mechanical strength of the final material. With the prospect of using these materials in a geological repository, it is of main importance to estimate their long-term properties and the influence of external and internal factors (chemical composition of the binder, storage temperature) on their characteristics. For…
Investigation on Ash Slagging Characteristics During Combustion of Biomass Pellets and Effect of Additives
2017
This study reports a systematic investigation into ash slagging behavior during combustion of barley straw and barley husk pellets with or without additives in a residential pellet burner. The slagging tendencies of the pellets were evaluated based on the amount, chemistry, mineralogy, and morphology of inlet ash formed as slag and sintering degrees of residual ash. The barley straw and husk pellets showed high slagging tendencies with 39 and 54 wt % ingoing ash formed as slag. Analyses using X-ray fluorescence and scanning electron microcopy combined with energy-dispersive X-ray spectroscopy revealed high concentrations of K, Si, and Ca but a minor amount of P in barley straw slag. The sla…
Chemical and dimensional evolution of cationic ions exchange resins in cement pastes
2013
Ion exchange resins (IERs) are widely used by the nuclear industry to decontaminate radioactive effluents. After use they are usually encapsulated in cementitious materials. However, the solidified waste forms can exhibit a strong expansion, possibly leading to cracking. Its origin is not well understood as well as the conditions when it occurs.In this work, the interactions between cationic resins in the Na+ or Ca2+ form and tricalcium silicate (C3S), Portland cement (CEM I) or Blastfurnace slag cement (CEM III/C) are investigated at an early age in order to gain a better understanding of the expansion process.The results show that during the hydration of a paste of C3S or CEM I containing…
Classification et chronologie de bas fourneaux de réduction du fer à usage unique au sud-ouest du Niger
2016
In southwestern Niger, near Niamey, several thousand single-use bloomery furnaces have been mapped and identified. The archaeological study of approximately 30 furnaces and their slag reveals the existence of four methods for iron smelting: three types of pit furnace and one slag-tapping type. The slag pit furnaces are clearly differentiated by the form and volume of their pits. All slag-tapping furnaces drain off slag through small openings. The slag is tapped either vertically or laterally. According to radiocarbon dates, the smelting activity developed in the 2 nd century AD and intensified through to the 14 th century. It continued to evolve until the middle of the 20 th century. The lo…
Konferenz der Nationalen Komitees der Weltkraftkonferenz Lettlands, Estlands und Litauens: [Vorträge]
1939
Kopsavilkumi angļu valodā
Archaeometrical study of paleometallurgical materials from the archaeological site “Cerro de las Balsas — Chinchorro” (La Albufereta, Alacant, Spain)
2008
An Iberian archaeological site located in the east of Spain is one of the most important cupellation centers found in the 4th century b.c. Different metallurgical materials were found in the archaeological site as minerals, cast slags, forged slags, metallic lead, cupella fragments and bronzes. Also was found reverbs remains used for cupper-based materials and cupellation procedure, and hearth forge remains for obtained iron material. The recuperated samples were studied by comparing samples of the same type of material by macroanalysis and microanalysis. The microanalysis and quantitation of the different archaeological materials was carried out by SEM/EDX. The information provides about t…
Physico-chemical evolution of low-pH cements : influence of the temperature and the retention mechanisme of alkalins
2010
Because of their high alkalinity, Portland cement (OPC)-based materials may have deleterious effects in an underground waste repository. A solution would be to use low-alkalinity cements (also referred as low-pH cements) generating interstitial solutions with a reduced pH (11 instead of 13.5 for OPC), and thus showing an improved chemical compatibility with the repository environment. In this work, the investigated formulations were based on binary (OPC / silica fume) or ternary (OPC / silica fume / slag or fly ash) blends, with high substitution levels of CEM I (from 30% to 80%). This research project met two main objectives: (i) study the chemical evolution of low-pH cements at 50°C or 80…
Genome-wide Analyses Identify KIF5A as a Novel ALS Gene
2018
© 2018 Elsevier Inc.