Search results for "Sludge"
showing 10 items of 320 documents
Characterization of activated sludge settling properties with a sludge collapse-acceleration stage
2019
Abstract The sedimentability of the activated sludge can be affected by the presence of a large variety of coagulants and polymers from a previous physical-chemical process. In this paper, the activated sludge settling process in industrial wastewater treatment plants where the sludge does not settle in a conventional way is studied. The two observed constant hindered settling velocity stages and the instant the intermediate sludge acceleration period occurs are described. A variation of the Richardson and Zaki model is used to characterize the two stages of constant settling velocity. The concentration of suspended solids, where a sudden decrease of hindered settling velocity was observed,…
Effect of transition metals and homogeneous hydrogen producers in the hydrothermal liquefaction of sewage sludge
2022
Hydrothermal liquefaction (HTL) of sewage sludge (SS) was performed in the presence of metallic Zn, Fe and Ni to investigate their effect on the performances of the process in terms of product yields and quality. Experiments were performed in subcritical water at 350 ◦C for 10 min using each metal individually and in the presence of homogenous hydrogen producers like formic acid (FA) and KOH. Interesting results were obtained with Zn that when used alone or in the presence of KOH, increased the cumulative biocrude (BC) yields and resulted in energy recoveries (ER) higher than 100% with respect to initial energy content of the biomass, thus indicating that HTL of SS is globally endothermic. …
Sewage Sludge Derived Materials for CO2 Adsorption
2021
The study tried to contribute to solving two serious environmental issues: CO2 reducing and sewage sludge disposal. Thus, sewage-sludge-derived materials were obtained in order to be evaluated for CO2 adsorption capacity. Therefore, the char resulted after the sewage sludge pyrolysis was subjected to oxidation and chemical activation processes by using different quantities of alkaline hydroxide. One of the obtained materials, activated with a lower quantity of alkaline hydroxide, was also treated with acid chloride. Further, the materials were structural and texturally characterized, and material treated with acid chloride was used for CO2 adsorption tests, due to high surface area and pore…
Influence of Temperature on Characteristics of Particulate Matter and Ecological Risk Assessment of Heavy Metals during Sewage Sludge Pyrolysis
2021
The formation process of Particulate Matter (PM) during sludge pyrolysis at different temperatures (300–700 °C) and the ecological risks of heavy metals were studied. The results showed that the particulate matter is mainly condensed on the quartz film in a carbon-based organic matter when the pyrolysis temperature was between 200–500 °C in a volatilization process. Inorganic particles was found in the particulate matter when the temperature was raised to 500–700 °C in a decomposition stage. Heavy metals were enriched in particulate matter with increase in pyrolysis temperature. When the temperature reached 700 °C, the concentration of Pb and Cd in the particulate matter significantly incre…
Comparative investigation on the value-added products obtained from continuous and batch hydrothermal liquefaction of sewage sludge
2022
Hydrothermal liquefaction (HTL) can be considered a promising route for the energy valorisation of waste sewage sludge (SS). However, not much information is available on continuous flow processing. In this study, the mixed SS was subjected to HTL at 350°C for 8 min in a continuous reactor with loadings of 10 wt% in the feed flow. The results show that the mass recovery reached 88%, with a biocrude yield of 30.8 wt% (3.9 wt% N content). The recovered biocrude yields are highly dependent on the selection of the recovery solvent for extraction, and dichloromethane can contribute an additional 3.1 wt% biocrude from aqueous phase, acetone can extract some pyrrole derivatives into the trapped ph…
Effect of the applied organic load rate on biodegradable polymer production by mixed microbial cultures in a Sequencing Batch Reactor
2006
This article studies the operation of a new process for the production of biopolymers (polyhydroxyalkanoates, PHAs) at different applied organic load rates (OLRs). The process is based on the aerobic enrichment of activated sludge to obtain mixed cultures able to store PHAs at high rates and yields. A mixture of acetic, lactic, and propionic acids at different concentrations (in the range 8.5-31.25 gCOD/L) was fed every 2 h in a sequencing batch reactor (SBR). The resulting applied OLR was in the range 8.5-31.25 gCOD/L/day. Even though, as expected, the increase in the OLR caused an increase in biomass concentration (up to about 8.7 g COD/L), it also caused a relevant decrease of maximal po…
Comparison between hybrid moving bed biofilm reactor and activated sludge system: a pilot plant experiment
2010
The paper presents the comparison between the traditional activated sludge system (AS) and a hybrid moving bed biofilm reactor (HMBBR). In particular, an experimental campaign has been carried out at the WWTP in Palermo (Italy), on a pilot plant consisting of two pre-anoxic schemes. The aerated tank of the HMBBR line was filled with suspended carriers (AnoxKaldnes™ K1), with a 30% filling ratio. The hydraulic load of the HMBBR line was increased up to two times the AS one. Further, in order to distinguish the additional contribution of the attached biomass for the HMBBR system, in the two lines the Mixed Liquor Suspended Solids (MLSS) was maintained as equal as possible. The monitoring peri…
Fermentation of municipal primary sludge: effect of SRT and solids concentration on volatile fatty acid production
2002
Laboratory bench-scale experiments were conducted to investigate the performance of primary sludge fermentation for volatile fatty acids production. Primary sludges from two major wastewater treatment plants located in Valencia (Pinedo and Carraixet) were used. Experiments were performed at solids retention times between 4 and 10 days, and total volatile solids concentrations between 0.6% and 2.8%. Operation at two temperatures (20 degrees C and 30 degrees C) was also checked. Results indicated the importance of feed sludge characteristics on volatile fatty acids yields, being approximately double for the Carraixet wastewater treatment plant sludge than for the Pinedo plant. In both cases, …
The occurrence and bioavailability of retene and resin acids in sediments of a lake receiving BKME (bleached kraft mill effluent)
1999
Retene (7-isopropyl-1-methylphenantrene) is an alkyl substituted PAH derived primarily from bacterial aromatization of abietic type resin acids. Retene has been shown to induce cytochrome P450 1A in rainbow trout whereas e.g. dehydroabietic acid does not induce it. We analysed resin acids and retene in sediments from seven sites receiving pulp and paper mill effluents from 4 mills, and from two reference sites. All mills have employed treatment of waste waters by activated sludge. The highest concentration of retene measured in sediment was 1600 μg/g d.w. (11 700 μg/g organic carbon, OC) while the highest concentration of resin acids was 1500 μg/g d.w. (9 300 μg/g OC). Downstream from the p…
Confirmation of in situ exposure of fish to secondary treated bleached-kraft mill effluent using a laboratory simulation
1998
To corroborate the responses in whitefish (Coregonus Iavaretus L.) exposed to elemental chlorine free (ECF) bleached-kraft pulp mill effluent (BKME) in situ, a 30-d laboratory exposure was carried out at concentrations simulating the field conditions. The flow-through exposures were conducted at four secondary (activated sludge) treated effluent (STE) concentrations: 1.3, 2.3, 3.5, and 7%. To evaluate the role of the secondary treatment, fish were also exposed to one concentration (3.5%) of pretreated effluent (PTE) from the mill. Compared to the control, whitefish liver 7-ethoxyresorufin-O-deethylase (EROD) activity was twofold in fish exposed to 3.5% STE, which was similar to monooxygenas…