Search results for "Solar Cells"

Electrochemical deposition of CZTS thin films on flexible substrate

2014

Abstract In this work, we report some preliminary results concerning the fabrication of quaternary semiconductor Cu2ZnSnS4 (CZTS) thin films on a flexible substrate through the simultaneous electrodeposition of elements having different standard electrochemical potentials. CZTS thin films were obtained by potentiostatic deposition from aqueous baths at room temperature and under N2 atmosphere, varying bath composition. Chemical composition and structure of the electrodeposited films were evaluated by EDS, SEM, RAMAN and XRD. Preliminary results on the photoelectrochemical behaviour of the films will be also presented.

Thin-Film Heterojunction by Carbon Nanotube Derivatives with Enhanced Solubility and Optical Properties

2012

Instabilities Effects in Thin Film Solar Cells: Reversible Ageing, Performance Recovery and Improvement by Electrical Stresses

Photoinduced ultrafast dynamics of Ru(dcbpy)2(NCS)2-sensitized nanocrystalline TiO2 films:The influence of sample preparation and experimental condit…

2004

In most of the previous ultrafast electron injection studies of Ru(dcbpy)2(NCS)2-sensitized nanocrystalline TiO2 films, experimental conditions and sample preparation have been different from study to study and no studies of how the differences affect the observed dynamics have been reported. In the present paper, we have investigated the influence of such modifications. Pump photon density, environment of the sensitized film (solvent and air), and parameters of the film preparation (crystallinity and quality of the film) were varied in a systematic way and the obtained dynamics were compared to that of a well-defined reference sample:  Ru(dcbpy)2(NCS)2−TiO2 in acetonitrile. In some cases, …

Dynamic preparation of TiO2 films for fabrication of dye-sensitized solar cells

2006

Preparation of nanocrystalline porous titanium dioxide (TiO2) films with roll-to-roll compatible methods was studied. Gravure printing was used for spreading TiO2 paste and paper calendering for pressing TiO2 nanoparticle films. Influence of different preparation methods on performance of fabricated dye-sensitized solar cells (DSSCs) was investigated. The attained light into electricity conversion efficiency was compared with DSSCs fabricated on conductive plastic substrates by doctor-blading spreading with subsequent static pressing. The latter method achieved a light conversion efficiency as high as 5.1%. The efficiency of the cells with a gravure printed TiO2 film was found to be rather …

Ester-functionalized poly(3-alkylthiophene) copolymers : synthesis, physicochemical characterization and performance in bulk heterojunction organic s…

2013

Abstract The introduction of functional moieties in the donor polymer (side chains) offers a potential pathway toward selective modification of the nanomorphology of conjugated polymer:fullerene active layer blends applied in bulk heterojunction organic photovoltaics, pursuing morphology control and solar cell stability. For this purpose, two types of poly(3-alkylthiophene) random copolymers, incorporating different amounts (10/30/50%) of ester-functionalized side chains, were efficiently synthesized using the Rieke method. The solar cell performance of the functionalized copolymers was evaluated and compared to the pristine P3HT:PCBM system. It was observed that the physicochemical and opt…

Nickel-Indium Sulphide Core-Shell Nonostructures Obtained by Spray-ILGAR Deposition

2013

Ni nanowires (NWs) of different lengths were fabricated by pulsed potentiostatic deposition within pores of polycarbonate membranes. After template dissolution, substrates underwent sequential Spray-ILGAR® depositions of thin indium sulphide films. The effect of deposition temperature was also investigated. For low number of deposition cycles, results showed complete and uniform covering of metal over the entire length of NWs, with formation of Ni - In2S3 core-shell structures. However, with increasing number of deposition cycles films became uneven and crusty, especially at higher temperatures, owing to the simultaneous formation of nickel sulfide. This drawback was almost eliminated doubl…

Role of photoactive layer morphology in high fill factor all-polymer bulk heterojunction solar cells

2011

We report on the realization of all-polymer solar cells based on blends of poly(3-hexylthiophene-2,5-diyl) (P3HT) as a donor and poly{[N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} (P(NDI2OD-T2)) as an acceptor. High fill factors are demonstrated for the first time in this class of devices suggesting high dissociation efficiency for the bounded electron-hole pairs and balanced electron and hole mobility along the thin films. The use of the high-mobility n-type P(NDI2OD-T2) polymer enables us to overcome one of the problems limiting the efficiency of all-polymer solar cells, resulting in fill factors comparable with those reported for …

Perovskite CH3NH3PbI3–XClx Solar Cells. Experimental Study of Initial Degradation Kinetics and Fill Factor Spectral Dependence

2021

The main drawback of the methylammonium lead halide perovskite solar cells is their degradation in ambient atmosphere. To investigate ambient-air-induced cell degradation, spec-tral dependencies of open-circuit voltage (VOC), fill factor (FF) and the power conversion effi-ciency (PCE) have been acquired (for the first time reported in literature). Our custom-made measurement system allowed us to perform measurements of the above-mentioned entities in situ directly in vacuum during and after thermal deposition of the elec-trode. We also studied how these parameters in vacuum changed after cell exposure to ambient air for 85 min (50 nm top electrode) and for 180 min (100 nm top Ag electrode).…

Enhanced nanoscopy of individual CsPbBr3 perovskite nanocrystals using dielectric sub-micrometric antennas

2020

We demonstrate an efficient, simple, and low-cost approach for enhanced nanoscopy in individual green emitting perovskite (CsPbBr3) nanocrystals via TiO2 dielectric nanoantenna. The observed three- to five-fold emission enhancement is attributed to near-field effects and emission steering promoted by the coupling between the perovskite nanocrystals and the dielectric sub-micrometric antennas. The dark-field scattering configuration is then exploited for surface-enhanced absorption measurements, showing a large increase in detection sensitivity, leading to the detection of individual nanocrystals. Due to the broadband spectral response of the Mie sub-micrometric antennas, the method can be e…