Search results for "Solid phase extraction"
showing 10 items of 297 documents
Rugged Large Volume Injection for Sensitive Capillary LC-MS Environmental Monitoring
2017
A rugged and high throughput capillary column (cLC) LC-MS switching platform using large volume injection and on-line automatic filtration and filter back-flush (AFFL) solid phase extraction (SPE) for analysis of environmental water samples with minimal sample preparation is presented. Although narrow columns and on-line sample preparation are used in the platform, high ruggedness is achieved e.g. injection of 100 non-filtrated water samples would did not result in a pressure rise/clogging of the SPE/capillary columns (inner diameter 300 µm). In addition, satisfactory retention time stability and chromatographic resolution were also features of the system. The potential of the platform for …
The Nature of Rest Silanol Groups on the Surfaces of Silica Based Solid Phase Extraction Materials
2013
Author's version of an article in the journal: Advanced Materials Research. Also available from the publisher at: http://dx.doi.org/10.4028/www.scientific.net/AMR.650.66 Chemically bonded solid phase materials are very important in separation chemistry. The chemically modified silica gel contains rest silanol groups that can affect the retention properties when they are used for separation of compounds. Some commercially available solid phase extraction (SPE) materials based on silica gel were analysed for rest silanol groups by near infrared spectroscopy. The combination frequency of the water molecules in the 5500- 5000 cm -1 region was used in identifying the nature of water molecules on…
Analysis of primary aliphatic short-chain monoamines by LC in water samples
2003
Abstract Several derivatization procedures with o-phthaldialdehyde-N-acetylcysteine (OPA-NAC) were compared for a rapid analysis of primary aliphatic short-chain monoamines in water samples by HPLC using a LiChorospher analytical separation column (100RP18 125 mm ×4 mm i.d., 5 μm). Both the solution and the solid-support assisted off-line derivatization on C18 SPE cartridges were inadequate options because of beginning degradation processes of the instable isoindol derivatives during their transfer to the analytical column. This problem was precluded with the on-column or solid-support assisted on-line derivatization. In the last mentioned procedure, the derivatization took place in a Hype…
Determination of organic pollutants in Anguilla anguilla by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS)
2021
© 2021 The Authors.
Determination of benzomercaptans in environmental complex samples by combining zeolitic imidazolate framework-8-based solid-phase extraction and high…
2020
[EN] In this work, the synthesis of zeolitic imidazolate framework-8 (ZIF-8) crystals and their subsequent application as effective sorbents for extraction and preconcentration of several benzomercaptans from environmental complex samples is described. These materials were prepared by solvothermal approach varying the concentration of n-butylamine modulator to modify the surface of the metal-organic framework. The resulting materials were characterized by scanning and transmission electron microscopy, powder X-ray diffraction and Fourier transform infrared spectroscopy. The ZIF-8 material that gave the best features was selected as extractive phase and the influence of various parameters (s…
Determination of organophosphate flame retardants in soil and fish using ultrasound-assisted extraction, solid-phase clean-up, and liquid chromatogra…
2017
A solid–liquid extraction method in combination with high‐performance liquid chromatography and tandem mass spectrometry was developed and optimized for extraction and analysis of organophosphorus flame retardants in soil and fish. Methanol was chosen as the optimum extraction solvent, not only in terms of extraction efficiency, but also for its broader analyte coverage. The subsequent clean‐up by solid‐phase extraction is required to eliminate matrix coextractives and reduce matrix effects. Recoveries of the optimized method were 50–121% for soil and 47–123% for biota, both with high precision (RSDs <12% in soil and <23% in biota). The method limits of detection ranged from 0.06 to 0.20 ng…
Enhancing extraction performance of organophosphorus flame retardants in water samples using titanium hierarchical porous silica materials as sorbent…
2021
Abstract A sorbent for the extraction of organophosphorus flame retardants has been proposed, based on UVM-7 (University of Valencia Materials) mesoporous silica doped with titanium. Designed cartridges have been applied to the extraction and preconcentration of flame retardants in water samples, followed by gas chromatography coupled to a mass spectrometry detector. Firstly, UVM-7 materials with different contents of titanium were synthesized and characterized by several techniques, thus confirming the proper mesoporous architecture. The potential of these materials was assessed in comparison with their morphological properties, resulting Ti50-UVM-7 the best solid phase. Several extraction…
Over-evaluation of total flavonoids in grape skin extracts containing sulphur dioxide
2015
Abstract Sulphur dioxide (SO 2 ) proved to increase absorbance at 280 nm of grape skin and seed extracts containing it, diluted with ethanol–HCl to assess total flavonoids and anthocyanins in the same analysis. Additional absorbance at 280 nm was also observed in acetone:H 2 O extracts, if the acetone had not completely evaporated before the extracts were diluted with a solvent. Flavonoids were correctly quantified in the extracts when SO 2 or acetone were removed by solid-phase extraction with a C 18 RP as sorbent and methanol as eluting solvent.
Dispersive solid-phase extraction based on oleic acid-coated magnetic nanoparticles followed by gas chromatography-mass spectrometry for UV-filter de…
2011
Abstract A sensitive analytical method to concentrate and determine extensively used UV filters in cosmetic products at (ultra)trace levels in water samples is presented. The method is based on a sample treatment using dispersive solid-phase extraction (dSPE) with laboratory-made chemisorbed oleic acid-coated cobalt ferrite (CoFe 2 O 4 @oleic acid) magnetic nanoparticles (MNPs) as optimized sorbent for the target analytes. The variables involved in dSPE were studied and optimized in terms of sensitivity, and the optimum conditions were: mass of sorbent, 100 mg; donor phase volume, 75 mL; pH, 3; and sodium chloride concentration, 30% (w/v). After dSPE, the MNPs were eluted twice with 1.5 mL …
Isolation of human milk whey proteins by solid phase extraction with a polymeric material modified with gold nanoparticles
2017
Abstract This work describes a method for the isolation of human milk whey proteins by solid-phase extraction (SPE) with a polymeric material modified with gold nanoparticles. Human serum albumin, α-lactalbumin, lactoferrin and lysozyme were selected as target proteins to establish the performance of SPE support. Several experimental variables (pH and ionic strength) that affect the SPE protocol were investigated to achieve the maximum extraction efficiency. Under optimal conditions, the SPE sorbent gave excellent recoveries, and offered a high permeability and reusability (> 20 times). The feasibility of this methodology was successfully demonstrated by isolating the target proteins in a m…