Search results for "Solid solution"
showing 10 items of 308 documents
Rietveld refinement study of vanadium distribution in V+4–ZrSiO4 solid solutions obtained from gels
2002
Abstract Vanadium-containing zircon gel precursors with nominal compositions Vx–ZrSiO4 with x=0.0, 0.004, 0.01, 0.04 and 0.2 were prepared by a previously reported colloidal sol-gel technique and annealed for 30 h at 1400 °C. The Rietveld refinement of the structures by X-ray powder diffraction confirms previous results concerning the limit of solubility of V+4 in the zircon structure. The new finding regarding with the entry of V+4 in the Zr+4 site for zircon doped with high contents of vanadium is in accordance with reported results.
Structural and Electric Properties of Sodium Lithium Niobate Ceramic Solid Solution Li0.08Na0.92NbO3
2011
A lead-free solid solution Li0.08Na0.92NbO3 was prepared by a two-stage hot-pressing technology. The structure and morphology of Li0.08Na0.92NbO3 were characterised by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The studies of electric conductivity were performed depending on temperature and frequency of electric measuring field on heating and cooling processes. These measurements revealed that the a.c. conductivity changed with the frequency according to the formula: σ(ω)=σ dc +Aω n where n < 1. These results were discussed considering the conduction mechanism as a type of polaron hopping.
Data on phase and chemical compositions of black sands from “El Ostional” beach situated in Mompiche, Ecuador
2020
Abstract Data revealing the phase and chemical compositions of natural black sands from “El Ostional” beach, located in the northern Ecuadorian Pacific coast have been presented. The samples were collected from six points over the shore area of approximately 500 × 40 m2. The data on crystalline phases (iron titanium oxide, orthoclase feldspar and zircon) were determined by X-ray powder diffraction (XRPD), while semi-quantitative chemical analyses of major (Fe and Ti) and trace elements were obtained by X-ray fluorescence spectroscopy (XRF). The phase composition was verified by scanning electron microscopy (SEM), using backscattered electron (BSE) mode and energy dispersive spectroscopy (ED…
Alumina supported Pt(1%)/Ce0.6Zr0.4O2 monolith: Remarkable stabilization of ceria–zirconia solution towards CeAlO3 formation operated by Pt under red…
2009
Abstract A structured Pt(1 wt%)/ceria–zirconia/alumina catalyst and the metal-free ceria–zirconia/alumina were prepared, by dip-coating, over a cordierite monolithic support. XRD analyses and Rietveld refinements of the structural data demonstrate that in the Pt supported catalysts ceria–zirconia is present as a Ce 0.6 Zr 0.4 O 2 homogeneous solid solution and that the deposition over the cordierite doesn’t produce any structural modification. Moreover no Pt sintering occurs. By comparing the XRD patterns recorded on Pt/ceria–zirconia/alumina and ceria–zirconia/alumina after three redox cycles, it results that Pt, favouring the structural reorganization of the ceria–zirconia into one cubic …
Dopant solubility in ceria: alloy thermodynamics combined with the DFT+U calculations
2018
This research was partly funded by the Russian Science Foundation (under the project 14-43-0005) and ERA-NET HarvEnPiez project, with the computer resources provided by Stuttgart Supercomputing Centre (Project DEFTD 12939). A. C. also acknowledges financial support from the University of Latvia Foundation (Arnis Riekstins’s ‘‘MikroTik’’ donation). Authors thank R. Merkle, A. Popov for fruitful discussions.
Effects of CuO doping on structure, microstructure and dielectric properties of BaTiO3–PbTiO3 solid solution
2019
Ba0.7Pb0.3TiO3 and Ba0.7Pb0.3TiO3+yCuO (y = 0.1 wt%, 0.5 wt%, 1 wt% and 3 wt%) samples were prepared by a solid state reaction method. High purity raw materials were used. Structural properties of the sintered pellets were studied by X-ray diffractometer X’Pert PRO (PANalytical). A single phase of perovskite structure with tetragonal phase was identified at room temperature. The surface morphology of the obtained specimens was characterized by the scanning electron microscopy (Hitachi S4700). The investigations has shown that the synthesized ceramic materials are characterized by the high density, homogeneity of microstructure and low porosity. Dielectric spectroscopy was used to study the …
Crystallization and microstructural development of nickel-containing aluminosilicate glasses with cordierite stoichiometry
2001
Abstract The crystallization behaviour of two glasses with chemical compositions MAl2O4/SiO2=1/2.5, being MNi and equimolar mixtures of Mg and Ni, was investigated. Glasses were prepared by cooling samples melted at 1650 °C. During thermal treatment over the range of temperature up to 1200 °C both glasses were first crystallized to form a β-quartz solid solution, then transformed to α-cordierite or spinel depending on the amount of nickel. The temperatures of both the crystallization of β-quartz solid solution and its further transformation were also dependent on the nominal amount of nickel. Lower temperatures were found for glasses with a large amount of nickel. UV–Vis diffuse reflectanc…
Optimized blue light generation in optically contacted walk-off compensated RbTiOAsO4 and KTiOP1−yAsyO4
1999
Abstract We study type II 1.32 μm second harmonic generation (SHG) in a RbTiOAsO 4 optically contacted walk-off compensated device. The reduction of the effective walk-off angle by a factor of 3.7 with respect to KTiOPO 4 for the same interaction leads to an enhancement by a factor of 10 of the conversion efficiency. A model is proposed for both type I and type II SHG in such a structure. The angular tuning curve is a multi-peaked one, as predicted by the model. The enhancement of the SHG conversion efficiency allows us to optimize the generation of blue laser light at 440 nm: a specially designed KTiOP 0.98 As 0.02 O 4 solid solution crystal achieves angular non-critical phase matching at …
Super-Ionic State Studies in LNTN Solid Solutions by Raman Spectroscopy
2012
Raman studies of the thermal phase transformations and structural disordering preceding transition to the super-ionic state in the Li0.12Na0.88TaуNb1-уO3 solid solution ceramics are reported. Disordering of the structure brought up by the extremely mobile Li+ ions at heating is found to be homogeneous and to proceed gradually. Disorientation and considerable deformation of the BO6 oxygen octahedrons facilitate translational mobility of the Li+ ions. The static disordering of the Nb5+ and Ta5+ sub-lattice caused by tantalum decreases the temperature of the phase transformation and increases the probability of transition to the super-ionic state supposed to occur over a broad temperature rang…
Thermal Expansion, Burns Temperature and Electromechanical Properties in Na1/2Bi1/2TiO3-SrTiO3-PbTiO3Solid Solutions
2011
Thermal expansion and electromechanical properties are studied for compositions Na1/2Bi1/2TiO3-SrTiO3-PbTiO3, belonging to various locations in the phase diagram. The main purpose of the studies is to extend the range of physical properties, which characterise the relaxor state and could be used for comparison with other relaxors. Possibility to evaluate Burns temperature from thermal expansion is discussed. The obtained results are compared to the well-know relaxor ferroelectric PLZT.