Search results for "Solid"

The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of polycarbonate

2012

Abstract Polycarbonate/silica nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1–5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of polycarbonate (PC) was investigated. Clusters of silica nanoparticles were well dispersed in the polycarbonate whose structure remained amorphous. NMR results showed intermolecular interactions involving the carbonyl groups of different polymeric chains which did not affect the intramolecular rotational motions. The presence of the lowest silica content showed a decrease in the storage and loss moduli below the glass transition temperature, pro…

Nanostructures materials for protection and consolidation of ancient structures

2014

The preservation and appreciation of the built cultural heritage is of particular interest, through researches and studies on innovative technologies. As evidenced by the good results obtained in some interventions both at national and international level, activities for the conservation of cultural heritage must be the result of synergies and collaboration of interdisciplinary groups, science and knowledge: architecture, engineering, technology, sociology, economics, urban planning, legislation must be managed and planned to work together. The theme of protection and consolidation of ancient structures, applying non-traditional technologies, requires a comprehensive overview of strategies …

Solid lipid nanoparticles from amphiphilic calixpyrroles

2016

Abstract Hypothesis Macrocyclic amphiphiles form interesting self-assembling structures, including solid lipid nanoparticles, which have potential applications in drug encapsulation. Aryl-extended calixpyrroles, which act as anion binding hosts, are expected to form solid lipid nanoparticles, even though the alkyl chains have unusual perpendicular geometry with respect to the hydrophilic head group. The preparation conditions and the alkyl chain length should affect the size and stability of the particles. Experiments Solid lipid nanoparticles of two aryl-extended calixpyrroles with resorcinol walls and either meso-dodecyl or meso-methyl alkyl chains were compared. Ethanolic solutions of th…

PROPERTIES AND APPLICATIONS OF POLYAMINOCYCLODEXTRIN DERIVATIVES

Nel presente lavoro sono state prese in esame le potenziali applicazioni delle poliamminociclodestrine. In particolare, diversi derivati poliamminociclodestrinici (amCD) sono stati ottenuti utilizzando un approccio sintetico diretto, tramite reazione di sostituzione nucleofila tra la heptakis-(6-deossi)-(6-bromo)-βCD (BrβCD) e poliammine lineari. Una volta effettuata l’opportuna caratterizzazione NMR, ESI-MS e potenziometrica, sono state investigate diverse possibili utilizzazioni di tali materiali. Anzitutto, sono state valutate le capacità di dare complessi di inclusione host-guest con diversi derivati organici sia delle amCD libere che di materiali costituiti da nanospugne a base di amCD…

Selenium Nanoparticles Synthesized via a Facile Hydrothermal Method

2012

Crystalline selenium nanostructures were synthesized from the reaction of a GeSe3 glass with water at 85°C for 144 hours. The hydrolysis of the Ge-Se bonds releases Se fragments in the solution where they form a colloidal suspension of amorphous nanospheres. The later evolve toward a more stable hexagonal phase (trigonal) leading to the anisotropic growth of one-dimensional monocrystalline structures. Filaments, bars and tubes of monocrystalline trigonal selenium were obtained with diameters ranging from 10 nm to 1 µm and aspect ratio up to 180. This simple process in aqueous solution opens new perspectives for the synthesis of 1D nanoparticles of trigonal selenium at large scale.

Polarization Switching in Heterophase Nanostructures: PLZT Relaxor Ceramics

2005

The polarization switching is experimentally investigated in hot-pressed PLZT-x/65/35 ceramics with a lanthanum content from 5 to 12 at. %. The specific features in the temperature dependence of the polarization switching in a heterophase state are interpreted by analyzing the change in the switched charge measured over wide ranges of fields and temperatures. Particular emphasis is placed on the role of depolarization fields induced by interphase boundaries. A model of the evolution of polydomain nanostructures with a change in the temperature and in the response to an external field is considered. It is assumed that the low-temperature dielectric anomaly and the temperature hysteresis are …

TEM and Raman characterisation of diamond micro- and nanostructures in carbon spherules from upper soils

2008

Carbonaceous spherules of millimeter size diameter and found in the upper soils throughout Europe are investigated by TEM, including SAED, HRTEM and EELS, and Raman spectroscopy. The spherules consist primarily of carbon and have an open cell-like internal structure. Most of the carbon appears in an amorphous state, but different morphologies of nano- and microdiamond particles have also been discovered including flake shapes. The latter observation, together with the original findings of some of these spherules in crater-like structures in the landscape and including severely deformed rocks with some spherules being embedded in the fused crust of excavated rocks, points towards unique cond…

Structural characterization of one-dimensional ZnO-based nanostructures grown by MOCVD

2010

Various one-dimensional (1D) ZnO-based nanostructures, including ZnO nano-wires (NWs) grown using vapour-liquid-solid (VLS) process, ZnO/ZnSe core/shell, nitrogen-doped ZnO and ZnMgO NWs were grown by metalorganic chemical vapour deposition (MOCVD). Transmission electron microscopy (TEM) analysis is presented. For all the samples, a high crystalline quality is observed. Some features are emphasized such as the gold contamination of ZnO wires grown under the metal droplets in the VLS process. It is concluded that MOCVD is a suitable technique for the realization of original ZnO nanodevices.

Room-temperature efficient light detection by amorphous Ge quantum wells

2013

In this work, ultrathin amorphous Ge films (2 to 30 nm in thickness) embedded in SiO2 layers were grown by magnetron sputtering and employed as proficient light sensitizer in photodetector devices. A noteworthy modification of the visible photon absorption is evidenced due to quantum confinement effects which cause both a blueshift (from 0.8 to 1.8 eV) in the bandgap and an enhancement (up to three times) in the optical oscillator strength of confined carriers. The reported quantum confinement effects have been exploited to enhance light detection by Ge quantum wells, as demonstrated by photodetectors with an internal quantum efficiency of 70%. © 2013 Cosentino et al.

Depletion of carbon nanotube depositions and tube realignment in the spreading of sessile drops

2015

Abstract We studied spreading of drops of water and dilute alcohol on multiwall carbon nanotube (MWNT) depositions. These deposits consisted of individual arc-discharge synthesized MWNTs and irregular amorphous carbon nanoparticles on hydrophilically rendered silicon substrates. The mobile circular contact line of a spreading drop created an annular shape on the deposit, where some of the MWNTs and the amorphous nanoparticles in particular were largely depleted. The effect was strongly dependent on the hydrophilicity of the substrate. Most of the MWNTs were not only left within the annuli, but were also apparently reoriented by their interaction with the passing contact line. Our results im…