Search results for "Solvent"
showing 10 items of 1395 documents
Living Polymer Chains with Predictable Molecular Weight and Dispersity via Carbanionic Polymerization in Continuous Flow: Mixing Rate as a Key Parame…
2016
Aiming at systematic variation of the parameter dispersity, Đ (or “polydispersity”), living polymers with predictable dispersity (Đ = 1.15–2.20) and controlled molecular weights (Mn = 3200–18 500 g mol–1) were prepared via carbanionic polymerization. The approach relies on a continuous flow reactor equipped with a tangential four-way jet micromixing device. By varying the total flow rate, the mixing efficiency of the initiator (sec-BuLi) and the corresponding vinyl monomers is controlled, resulting in polymers with predefined dispersity, while the number-average molecular weight, Mn, is kept constant. In this manner living polystyrene (PS), poly(p-methylstyrene) (PpMeS), and poly(2-vinylpyr…
Excess viscosity and glass transition
2001
Abstract Literature data on the viscosity of solutions of poly(butyl methacrylate) (PBMA) and poly(methyl methacrylate) (PMMA) in diethyl phthalate (DEP) for different temperatures, including the range around and below T g , the glass transition temperatures of the pure polymers, were evaluated by means of an approach that uses surface fractions as composition variables. The discussion of these results together with information on solutions of the isomeric polymers, poly(vinyl acetate) (PVAc) and poly(methyl acrylate) (PM(A)), in the same solvent testifies that the previously published relations remain valid for T T g . They enable the determination of viscosities of the pure polymers below…
Role of Solvent Compatibility in the Phase Behavior of Binary Solutions of Weakly Associating Multivalent Polymers
2021
AbstractCondensate formation of biopolymer solutions, prominently those of various intrinsically disordered proteins (IDPs), is determined by “sticky” interactions between associating residues, multivalently present along the polymer backbone. Using a ternary mean field “stickers-and-spacers” model, we demonstrate that if sticker association is of the order of a few times the thermal energy, a delicate balance between specific binding and non-specific polymer-solvent interactions gives rise to a particularly rich ternary phase behavior under physiological circumstances. For a generic system represented by a solution comprising multi-associative scaffold and client polymers, the difference i…
Interpolymer complexes and polymer compatibility.
2012
A reliable method to decide whether two polymers A and B are miscible or incompatible would be very helpful in many ways. In this contribution we demonstrate why traditional procedures cannot work. We propose to use the intrinsic viscosities [η] of the polymer blends instead of the composition dependence of the viscosities as a criterion for polymer miscibility. Two macromolecules A and B are miscible because of sufficiently favorable interactions between the two types of polymer segments. For solutions of these polymers in a joint solvent, this Gibbs energetic preference of dissimilar intersegmental contacts should prevail upon dilution and lead to the formation of interpolymer complexes, …
Grafted polymer layers under variable solvent conditions: A Monte Carlo simulation
1993
Polymer chains anchored with one end at a hard wall under variable solvent conditions are investigated by Monte Carlo simulations using the bond- fluctuation model. Detail information on the structural properties are obtained above, at, and below the Θ-point and discussed in terms of the appropriate theories. In particular, the scaling of the brush thickness is formulated and verified by the simulation data. For the dynamics at the Θ-point, both the relaxation time of the chain configuration and the mean-square time displacement are studied. At temperatures distinctly below the Θ-point, we find that the layer develops considerable lateral inhomogeneity in its density, which has not been pre…
Isobornyl Methacrylate as a Reactive Solvent of Polyethylene
2004
Solutions containing 15 wt, -% of a low-molar-mass polyethylene (PE) in isobornyl methacrylate (IBoMA), containing 0, 5 or 10 wt.-% of 1,4 butanediol dimethacrylate (BDDMA) as crosslinker, were polymerized using either benzoyl peroxide (BPO), at 80°C, or dicumyl peroxide (DCPO), with a thermal cycle attaining 150°C, as initiators. Phase separation of an amorphous PE-rich phase took place when carrying out the reaction at temperatures higher than the PE melting temperature. Partial crystallization of PE was observed when cooling to room temperature. Depending on the initial amount of BDDMA, the fraction of PE that was phase separated varied between 57 and 66% of the initial amount, with crys…
Polymer, Metal, and Hybrid Nano- and Mesotubes by Coating Degradable Polymer Template Fibers (TUFT Process)
2000
). Selective reaction with the silver atoms at the interface of the particles occurred and the coated particles were then extracted from reverse micelles. The powder of coated nanocrystals thus obtained was then dispersed in hexane, giving an optically clear solution. The size distribution was still rather large (30 %), and to reduce it a size-selected precipitation process [20] was used. In this process two solvents, such as hexane and pyridine, are mixed. The first is a good solvent and the second a poor solvent for the alkyl chains. With this solvent mixture, the larger coated particles flocculated whereas the smaller ones remain in the solution, thus providing size selection. By repeati…
Biological evaluation of PLLA membranes, with different pore diameters, to stimulate cell adhesion and growth in vitro
2015
Polymeric membranes prepared via DIPS (Diffusion Induced Phase Separation) are widely studied and utilized as scaffolds for the regeneration of tissue. In this work, poly (L)-lactide membrane are prepared through a DIPS protocol starting from a ternary solution made of polymer, dioxane (solvent) and water (non-solvent). A three-dimensional, porous and mechanically stable membrane is desirable for ingrowth of human bronchial epithelial cells. Polymeric membranes prepared via DIPS (Diffusion Induced Phase Separation) are widely studied and utilized as scaffolds for the regeneration of tissue. In this work, poly (L)-lactide membrane are prepared through a DIPS protocol starting from a ternary …
Structure of bottle-brush brushes under good solvent conditions: a molecular dynamics study.
2011
We report a simulation study for bottle-brush polymers grafted on a rigid backbone. Using a standard coarse-grained bead-spring model extensive molecular dynamics simulations for such macromolecules under good solvent conditions are performed. We consider a broad range of parameters and present numerical results for the monomer density profile, density of the untethered ends of the grafted flexible backbones and the correlation function describing the range that neighboring grafted bottle-brushes are affected by the presence of the others due to the excluded volume interactions. The end beads of the flexible backbones of the grafted bottle-brushes do not access the region close to the rigid…
Industrial applications of the aggregation of block copolymers in supercritical CO 2 : a SANS study
2002
Industrial applications of supercritical carbon dioxide (scCO2) rely upon the rather selective and easily adjustable solvent ability of CO2. CO2 near the critical point is a poor solvent for high molecular weight (HMW) hydrocarbon polymers, while it is a very good solvent for amorphous fluorinated polymers. By increasing the pressure, CO2 becomes a good solvent even for HMW hydrogenated chains. Specially engineered amphiphilic di-block copolymers, with CO2-philic and CO2-phobic portions, are expected to undergo trough a monomer–aggregate transition when the solvent density of the scCO2 changes. Here small-angle neutron scattering (SANS) results are reported for a block copolymer dissolved i…