Search results for "Sorptivity"
showing 10 items of 51 documents
Spectrophotometric estimation of bicalutamide in tablets
2007
A simple, sensitive, rapid, accurate and precise spectrophotometric method has been developed for the estimation of bicalutamide in bulk and pharmaceutical dosage forms. Bicalutamide shows maximum absorbance at 272 nm with molar absorptivity of 2.3399×10(4) l/mol/cm. Beer's law was obeyed in the concentration range of 1.5-18 μg/ml. The limit of detection and limit of quantification were found to be 0.1 and 0.4 μg/ml, respectively. Results of analysis were validated statistically and by recovery studies.
3,3?,5,5?-Tetramethylbenzidme for the colorimetric determination of manganese in water
1998
Manganese can be determined by colorimetry with previous oxidation of Mn(II) in a strong basic medium, using 3,3′,5,5′-tetramethylbenzidine as a chromogenic reagent. The molar absorptivity of the reaction product is 3.4 × 104 mol−1l cm−1l, the detection limit 3 ng/ml, the RSD (0.5 mg/l,n = 8) 0.9% and the calibration range (1-cm cells) 0.02–0.8 mg/1 V(V), Cr(VI) and Co(II) are the most significant interferences. The new method was compared with an AAS procedure (air-acetylene flame) with previous solvent extraction and also with a colorimetric method for the determination of manganese in sea and drinking water.
Characterization of ethylene oxide/tert-octylphenol condensates by ultraviolet and infrared spectrometry
1986
Abstract The average degree of condensation of ethylene oxide/tert-octylphenol condensate surfactants can be estimated rapidly by u.v. and i.r. spectrometry. The u.v. method is based on evaluating the specific absorptivity, a , at 275 nm in aqueous ethanol (60:40 v/v), and inserting this value in equations obtained from previously characterized samples, relating a to the average properties to be determined. Infrared spectrometry is applied similarly; the average properties to be determined are related to the ratio between the band heights at 960 and 840 cm −1 . The relative standard deviations ( n = 10) obtained for a sample of Triton X-100 were 2% by u.v. spectrometry, and 3% by i.r. spect…
Study of Structure–Third-Order Susceptibility Relation of Indandione Derivatives
2016
By using the Z-scan method we studied the third-order nonlinear optical parameters of several aminobenziliden-1,3-indandione (ABI) derivatives that have previously been shown to own second-order nonlinear optical properties. Measurements were carried out using two 1064 nm Nd:YAG lasers with picosecond (ps) and nanosecond (ns) pulse widths, respectively. When ns laser was employed in the Z-scan setup, a strong thermal lensing took place resulting in severe overestimation of optical Kerr coefficients. Due to this reason the ps laser was employed to evaluate correct magnitude of Kerr effect. For investigated organic molecules, experimental results show that two-photon absorption at 1064 nm is …
Soils with Specific Features
2016
This chapter deals with some specific features of soil that are relevant for interpretation of infiltration experiments. Infiltration in water repellent soils is first examined. After summarizing the causes of hydrophobicity, phenomena associated to infiltration in water repellent soil, including reduced infiltration rates and irregular wetting front advance, are illustrated. The Water Drop Penetration Time (WDPT), the Molarity of an Ethanol Droplet (MED) and the Repellency tests for quantitative assessment of soil water repellency are presented. Particular attention is given to estimation of subcritical soil water repellency by means of soil sorptivity measurements conducted with infiltrat…
Dithienopyrrolobenzothiadiazole-based organic dyes for efficient dye-sensitized solar cells
2014
Four novel D–π–A metal-free organic dyes DTP1–4 containing a dithienopyrrolobenzothiadiazole (DTPBT) unit were synthesized and applied in dye-sensitized solar cells, where DTPBT was employed as a π-spacer for the first time. The photophysical, electrochemical and photovoltaic properties of the dyes were systematically investigated. The dyes DTP1–4 showed broad absorption spectra and high molar extinction coefficient, resulting in high light harvesting efficiency. In addition, the impacts of donors and the thiophene unit as an additional π-spacer were also studied. The results showed that the dye DTP4 with triphenylamine as the donor exhibited better photovoltaic performance than DTP1–3 with…
Analytic JV-Characteristics of Ideal Impurity PV-Cells
2017
In this article the mathematical modeling of idealized impurity photovoltaic cells is greatly simplified through the derivation of analytic JV-characteristics. The resulting expressions are also facilitating the intuitive understanding of such photovoltaic devices. The new model is used to investigate the sensitivity of impurity photovoltaic cells to the absorption band width, the impurity related absorptivity and the external radiative efficiency. It is found that impurities with narrow absorption bands or low absorptivity can greatly reduce the efficiency of the device, even if they are fully radiative and have energy levels situated at optimal positions in the band gap. It is also found …
Optical aging behaviour naturally induced on As_2S_3 microstructured optical fibres
2014
The efficiency and the stability of As2S3 microstructured optical fibres (MOFs) are limited by the shift of their optical properties that occurs over time due to a naturally induced aging process. Such sensitivity becomes more crucial for long optical path. Among the variety of fibre designs, the MOFs are developed for promising photonics applications such as supercontinuum generation for example. In the present work, we carried out an extensive aging study on As2S3 chalcogenide MOFs in ambient atmosphere. The evolution of the fibre transmission spectrum has been studied with regards to exposure time. The analysis of the transmission line profile was performed in terms of different spectral…
Synthesis of phenothiazine-based di-anchoring dyes containing fluorene linker and their photovoltaic performance
2015
Abstract A new di-anchoring organic dye based on phenothiazine featuring A-D-π-D-A (acceptor-donor-π-linker-donor-acceptor) configuration with fluorene as the π linker was designed and successfully synthesized. Compared to the corresponding mono-anchoring D-A congener, this new dye exhibited a broader and stronger absorption in the light wavelength ranging from 400 nm to 600 nm and thus showed a more efficient photovoltaic performance for dye-sensitized solar cells (DSSCs). The overall power conversion efficiency (η) of this new dye in a sensitized solar cell amounted to 5.70%, which is 17% higher than that of the equivalent based counterpart (4.87%). On the other hand, the introduction of …
A clear sky atmospheric model valid for the mediterranean zone
1988
Abstract The ASHRAE clear sky model in the version proposed by G.L. Powell has been applied to a set of clear days from two coastal locations of Yugoslavia. The results have provided further elements to confirm the existence of a clear sky atmospheric model valid for the whole Mediterranean zone. This model is characterized by values of the atmospheric extinction coefficient higher than the corresponding ASHRAE ones with upper limits defined by the regression curve derived by using data of Palermo.