Search results for "Spectroscopy"
showing 10 items of 10293 documents
Determination of thyreostatics in animal feed by micellar electrokinetic chromatography
1999
The determination of the thyreostatics 2-thiouracil, its derivatives (4-methyl-2-thiouracil, 4-propyl-2-thiouracil and 4-phenyl-2-thiouracil) and methimazole in manufactured dried animal feed by micellar electrokinetic chromatography (MEKC) is described. A 99 +/- 5% extraction yield at the 20 micrograms g-1 level (n = 8) was achieved by shaking the milled fodder with methanol-1 M NaOH (80 + 20). Aliquots of the supernatant were injected in a 75 microns x 33.5 cm uncoated silica capillary using pressure; separation was performed at 23 degrees C with 15 kV (positive polarity) in a background electrolyte (BGE) containing 40 mM sodium dihydrogenphosphate, 50 mM sodium dodecyl sulfate and 15 mM …
On-line removal of mass interferences in palladium determination by ICP-MS using modified capillaries coupled to micro-flow nebulizers
2001
This paper describes a novel approach developed for on-line removal of interferences within modified capillaries coupled to micro-flow nebulizers, for palladium determination by inductively coupled plasma mass spectrometry (ICP-MS). A strong cation exchanger [2-(4-chlorosulfophenyl)ethyltrichlorosilane)] was covalently bound to the silica capillary that was coupled to a microconcentric nebulizer (MCN) or to a direct injection nebulizer (DIN). The modified surface of the capillary was able to selectively retain copper and yttrium from aqueous samples at pH 7.5 during the sample introduction step, while Pd was not retained and 105Pd could be determined in the absence of interferent elements. …
Determination of atranol and chloroatranol in perfumes using simultaneous derivatization and dispersive liquid-liquid microextraction followed by gas…
2013
Abstract A new analytical method based on simultaneous derivatization and dispersive liquid–liquid microextraction (DLLME) followed by gas chromatography–mass spectrometry (GC–MS), for the determination of the allergenic compounds atranol and chloroatranol in perfumes, is presented. Derivatization of the target analytes by means of acetylation with anhydride acetic in carbonate buffer was carried out. Thereby volatility and detectability were increased for improved GC–MS sensitivity. In addition, extractability by DLLME was also enhanced due to a less polar character of the solutes. A liquid–liquid extraction was performed before DLLME to clean up the sample and to obtain an aqueous sample …
Determination of aniline in vegetable oils by diazotization and coupling in a microemulsion medium
1990
Abstract A microemulsion containing sodium dodecyl sulphate and n -pentanol in a mass ratio of 1 : 4, water and a vegetable oil was investigated using pseudo-tenary phase diagrams. The medium can co-solve important amounts of vegetable oils and aqueous solutions over a wide range of ionic strengths. A procedure for the determination of 1.4–140 μg ml −1 of aniline in vegetable oils using ionic diazotization and coupling reactions was developed. The absorbance was measured in an optically clear microemulsion containing 4% or 20% of oil. The procedure is much simpler and rapid than the official chromatographic methods and gives almost the same limits of detection (ca. 05 μg ml −1 ) using no mo…
Spectrophotometric estimation of bicalutamide in tablets
2007
A simple, sensitive, rapid, accurate and precise spectrophotometric method has been developed for the estimation of bicalutamide in bulk and pharmaceutical dosage forms. Bicalutamide shows maximum absorbance at 272 nm with molar absorptivity of 2.3399×10(4) l/mol/cm. Beer's law was obeyed in the concentration range of 1.5-18 μg/ml. The limit of detection and limit of quantification were found to be 0.1 and 0.4 μg/ml, respectively. Results of analysis were validated statistically and by recovery studies.
Flow‐Injection Chemiluminescent Determination of Thiamine in Pharmaceutical Samples by On‐line Photodegradation
2004
Abstract A simple, sensitive, and precise method for the determination of thiamine hydrochloride in a flow‐injection system is described. The method is based on the UV irradiation of thiamine in acid medium. Then, the photo‐fragments are oxidized by permanganate in acid medium, and the resultant chemiluminescent intensity is measured. The optimum conditions for the photoreaction and for the chemiluminescence emission were investigated. The method allows the determination of thiamine, over the range 0.05(LOD)–84 mg · l−1, with a throughput of 30 h−1, and a RSD (n, 20) at 20 and 0.5 mg · l−1 of the thiamine level of 2.5 and 1.3%, respectively. The method was applied to pharmaceutical preparat…
Evaluation of C18 adsorbent cartridges for sampling and derivatization of primary amines in air
2004
Abstract The sampling efficiency of C18 solid-phase extraction cartridges was investigated for methylamine, ethylamine, propylamine, butylamine and pentylamine, in air. Determination of these analytes was based on derivatization with o-phthaldialdehyde–N-acetylcysteine (OPA–NAC) on the solid support and fluorescence detection at λexcitation=330 nm and λemission=440 nm of the eluted derivatives. The calibration model derived from aqueous standards was statistically comparable with the calibration model for air standards. Aqueous amines can be used as standards. The method was useful for calculating short-term exposure limits (STEL). A sampling time of 15 min at 30 ml min−1 was employed. Good…
Automatic in-tube SPME and fast liquid chromatography: A cost-effective method for the estimation of dibuthyl and di-2-ethylhexyl phthalates in envir…
2007
A 80-cm length commercially available capillary coated with 95% polydimethylsiloxane and 5% polydiphenylsiloxane (TBR-5) was employed to carry out on-line extraction and preconcentration of dibuthyl phthalate (DBP) and di-2-ethylhexyl phthalate (DEHP) in the chromatographic system. The coated capillary was placed between the sample injection loop and the injection needle of an autosampler. Variables affecting the automatic in-tube solid-phase microextraction (SPME) were optimized. A Genesis C(18) (5 cm x 4.6 mm i.d., 4 microm particle size) was employed as analytical column. The achieved limits of detection by use of diode array detection were 1 and 2.5 microg L(-1), respectively. The propo…
Micellar enhanced fluorimetric determination of carbendazim in natural waters
1994
Abstract A micellar enhanced flow-injection fluorimetric method was developed for the determination of carbendazim in natural water samples. The method is based on the direct injection of 500 μ1 of water into a three-channel flow manifold in which the samples are merged with a buffer solution and subsequently with a surfactant solution. Two alternative procedures were used: one based on the use of sodium dodecyl sulphate micelles in 0.1 M HCl, which permits a 2.6-fold enhancement of the sensitivity found in the absence of micelles to be obtained, and the other based on the use of cetyltrimethylammonium bromide in 0.1 M NaOH, which provides a 11.6-fold enhancement of sensitivity and a limit …
Photochemical-chemiliminometric determination of aldicarb in a fully automated multicommutation based flow-assembly
2004
[EN] A sensitive and fully automated method for determination of aldicarb in technical formulations (Temik) and mineral waters is proposed. The automation of the flow-assembly is based on the multicommutation approach, which uses a set of solenoid valves acting as independent switchers. The operating cycle for obtaining a typical analytical transient signal can be easily programmed by means of a home-made software running in the Windows environment. The manifold is provided with a photoreactor consisting of a 150 cm long x 0.8 mm i.d. piece of PTFE tubing coiled around a 20 W low-pressure mercury lamp. The determination of aldicarb is performed on the basis of the iron(III) catalytic minera…