Search results for "Spinning"
showing 10 items of 204 documents
H3PW12O40 supported on mesoporous MCM-41 and Al-MCM-41 materials: preparation and characterisation
2011
MCM-41 and Al–MCM-41 has been synthesized using cetyl-trimethylammonium bromide (CTAB) surfactant as template and adding the silica precursor to aqueous solutions containing CTAB. The obtained solids were calcined at 600 °C for 4 h. HPW heteropolyacid supported on the mesoporous were prepared using the incipient wetness method. The characterization of materials was performed by X-ray diffraction, Transmission Electron Microscopy, N2 adsorption, 29Si Cross Polarization–Magic Angle Spinning and 27Al MAS NMR. Results showed that the hexagonal structure is obtained in both cases. The Aluminium species are located inside an extra-framework. The impregnation reduces the surface area of the mesopo…
Low-temperature Ti-containing 3:2 and 2:1 mullite nanocrystals from single-phase gels
2007
Abstract TiO 2 -containig single-phase gels with (Al 2 O 3 + TiO 2 )/(SiO 2 ) molar ratios 3/2 and 2/1 were prepared by gelling mixtures of aluminium nitrate, tetraethylorthosilicate and titanium isopropoxide. Gels were fast heated at several temperatures up to 1100 °C. Dried and heated gels were characterized by differential thermal analysis (DTA), magic angle spinning nuclear magnetic resonance (MAS-NMR), X-ray powder diffraction (XRD), and scanning and transmission electron microscopies (SEM and TEM). Coupled DTA and XRD results of gels fast heated at 900 °C showed the crystallisation of two mullites as well as a small amount of alumina-silica spinel. 27 Al NMR spectra showed the format…
Effect of a Compatibilizer on the Morphology and Properties of Polypropylene/Polyethylentherephthalate Spun Fibers
2017
Fibers spun by melt spinning of binary and ternary polypropylene/ polyethylenetherephthalate blends have been produced and characterized in order to investigate the effect of a compatibilizer on their morphology and mechanical properties. The compatibilizer was a maleic anhydride-functionalized rubber copolymer. The effect of the compatibilizer was well evident in the isotropic state, as the morphology became very fine, the size of the dispersed particles was very small, and the adhesion was better. The effect of the compatibilizer on the mechanical properties is very relevant, especially in the elongation at break. On the contrary, no relevant effect was observed in the anisotropic oriente…
Morphology Modification of Polyethylene/Clay Nanocomposite Samples under Convergent Flow
2009
The morphology of PE/CL nanocomposite samples subjected to convergent flows is studied. Elongational flow – the typical flow involved in spinning and film-blowing processing operations – significantly increases with the reduction of the capillary diameter. The values of the convergent extensional stress (calculated by Cogswell's formula) for the PE/CL systems, for all the adopted capillary geometries, are greater than the calculated values for pure polyethylene. The applied convergent flow, at the entrance of the capillary, is able to change the clay morphology and consequently the final material properties on the PE/CL system with limited affinity between the matrix and organo-modified cla…
Morphology and Properties of Polyethylene/Clay Nanocomposite Drawn Fibers
2008
The influence of an elongational flow on the morphology of PE/clay nanocomposite drawn fibers was studied. An increase of the elastic modulus and the tensile strength as well as a decrease of the elongation at break are observed with increasing draw ratio. The applied elongational gradient orients the polymer chains and the clay particles along the spinning direction. When the applied flow results in the formation and the orientation of exfoliated nanoparticles, a pronounced increase of the mechanical properties is observed. The dispersed clay particles can be broken and oriented by the extensional flow, which might indicate a flow induced intercalated/exfoliated morphology transition.
Comparative performance of electrospun collagen nanofibers cross-linked by means of different methods.
2009
[EN] Collagen, as the major structural protein of the extracellular matrix in animals, is a versatile biomaterial of great interest in various engineering applications. Electrospun nanofibers of collagen are regarded as very promising materials for tissue engineering applications because they can reproduce the morphology of the natural bone but have as a drawback a poor structural consistency in wet conditions. In this paper, a comparative study between the performance of different cross-linking methods such as a milder enzymatic treatment procedure using transglutaminase, the use of N-[3-(dimethylamino)propyl]-N¿-ethylcarbodiimide hydrochloride/ N-hydroxysuccinimide, and genipin, and the u…
Photoluminescence Study of Defects in ZnO-Coated Polyacrylonitrile Nanofibers
2020
International audience; Core-shell nanostructures of one-dimensional (1D) polyacrylonitrile (PAN)/zinc oxide (ZnO) were obtained by combining atomic layer deposition (ALD) and electrospinning. Nanofibers with different ZnO thicknesses were synthesized and investigated. The present work offers novel information about 1D ZnO structural defects and activation energies (Ea) by performing photoluminescence (PL) measurements. PL measurements of 1D ZnO/PAN samples were investigated from 77 K to 273 K (room temperature). By analyzing the obtained data of the emission spectrum, Ea and temperature coefficients were calculated. The results let us suggest an approximate model of defects in 1D ZnO/PAN s…
Gram-scale selective synthesis of WO3−x nanorods and (NH4)xWO3 ammonium tungsten bronzes with tunable plasmonic properties
2021
Localized surface plasmon resonance properties in unconventional materials like metal oxides or chalcogenide semiconductors have been studied for use in signal detection and analysis in biomedicine and photocatalysis. We devised a selective synthesis of the tungsten oxides WO3-x and (NH4)xWO3 with tunable plasmonic properties. We selectively synthesized WO3-x nanorods with different aspect ratios and hexagonal tungsten bronzes (NH4)xWO3 as truncated nanocubes starting from ammonium metatungstate (NH4)6H2W12O40·xH2O. Both particles form from the same nuclei at temperatures >200 °C; monomer concentration and surfactant ratio are essential variables for phase selection. (NH4)xWO3 was the prefe…
Core-shell PLA/Kef hybrid scaffolds for skin tissue engineering applications prepared by direct kefiran coating on PLA electrospun fibers optimized v…
2021
Abstract Over the recent years, there is a growing interest in electrospun hybrid scaffolds composed of synthetic and natural polymers that can support cell attachment and proliferation. In this work, the physical and biological properties of polylactic acid (PLA) electrospun mats coated with kefiran (Kef) were evaluated. Gravimetric, spectroscopic (FTIR-ATR) and morphological investigations via scanning electron microscopy confirmed the effective formation of a thin kefiran layer wrapped on the PLA fibers with an easy-tunable thickness. Air plasma pre-treatment carried out on PLA (P-PLA) affected both the morphology and the crystallinity of Kef coating as confirmed by differential scanning…
Effect of hydroxyapatite concentration and size on morpho-mechanical properties of PLA-based randomly oriented and aligned electrospun nanofibrous ma…
2019
The growing demand for nanofibrous biocomposites able to provide peculiar properties requires systematic investigations of processing-structure-property relationships. Understanding the morpho-mechanical properties of an electrospun scaffold as a function of the filler features and mat microstructure can aid in designing these systems. In this work, the reinforcing effect of micrometric and nanometric hydroxyapatite particles in polylactic acid-based electrospun scaffold presenting random and aligned fibers orientation, was evaluated. The particles incorporation was investigated trough Fourier transform infrared spectroscopy in attenuated total reflectance. The morphology of the nanofibers …