Search results for "Stability"

Wide Angle X-ray Scattering as a Technique of Choice to Probe Asphaltene Hierarchical Structures

2020

Bitumens are composite systems extensively used in road pavements. Due to their complex nature, a rational understanding of the relationships between composition, structure and performances of these materials is still far from being achieved, so research attempting to shed more light in this field is required. Here, we exploit Wide Angle X-ray Scattering (WAXS) as a technique of choice to shed light on the bitumen structure at different length scales. Diagnostic fingerprints, characterizing the WAXS profile, are correlated to specific Bragg distances which can be reasonably attributed to the molecular and supramolecular aggregation taking place at various levels of complexity leading to the…

Electrochemical conversion of CO2 to formic acid using a Sn based electrode: A critical review on the state-of-the-art technologies and their potenti…

2021

Abstract The electrochemical conversion of carbon dioxide is considered one of the most promising strategies to convert waste-CO2 into value-added chemicals. This review focuses on the synthesis of formic acid/formate in aqueous electrolyte using Sn-based cathodes; this material is considered relatively cheap and shows promising results in terms of faradaic efficiency. In order to be suitable at an industrial scale, the process should present simultaneously high current densities, faradaic efficiencies close to 100%, high concentrations of formic acid and long-term stability. Analysing the main results reported in the literature, it was observed that to date further studies are necessary to…

Thermally stimulated luminescence of undoped and Ce3+-doped Gd2SiO5 and (Lu,Gd)2SiO5 single crystals

2015

Abstract Thermally stimulated luminescence (TSL) characteristics (TSL glow curves and TSL spectra) are investigated in the 4–520 K temperature range for the single crystals of gadolinium and lutetium–gadolinium oxyorthosilicates X-ray irradiated at 4 K, 8 K, or 80 K. The nominally undoped Gd2SiO5 and (Lu,Gd)2SiO5 crystals, containing traces of Ce3+, Tb3+, and Eu3+ ions, and Ce3+-doped Gd2SiO5 and (Lu,Gd)2SiO5 crystals are studied. For the first time, the TSL glow curves of these materials are measured separately for the electron (intrinsic, Ce3+- or Tb3+-related) and hole (Eu3+-related) recombination luminescence, and the TSL glow curve peaks, arising from thermal decay of various electron …

Aqueous Dilution of Noble NPs Bulk Dispersions: Modeling Instability due to Dissolution by AF4 and Stablishing Considerations for Plasmonic Assays

2020

Among different nanomaterials, gold and silver nanoparticles (AuNPs and AgNPs) have become useful tools for a wide variety of applications in general, and particularly for plasmonic assays. Particle size and stability analysis are key elements for their practical applications since the NPs properties depend on these parameters. Hence, in the present work, asymmetrical flow field flow fractionation (AF4) coupled to UV-Vis and dynamic light scattering (DLS) detectors in series, has been evaluated for stability studies of citrate-capped AuNPs and AgNPs aqueous dispersions. First, experimental parameters, such as mobile phase or cross-flow rate were optimized. Sodium azide to pH 7 for AuNPs and…

High-voltage measurements on the 5 ppm relative uncertainty level with collinear laser spectroscopy

2018

We present the results of high-voltage collinear laser spectroscopy measurements on the 5 ppm relative uncertainty level using a pump and probe scheme at the transition of involving the metastable state. With two-stage laser interaction and a reference measurement we can eliminate systematic effects such as differences in the contact potentials due to different electrode materials and thermoelectric voltages, and the unknown starting potential of the ions in the ion source. Voltage measurements were performed between −5 kV and −19 kV and parallel measurements with stable high-voltage dividers calibrated to 5 ppm relative uncertainty were used as a reference. Our measurements are compatible …

Optimization and analysis of processes with moving materials subjected to fatigue fracture and instability

2013

We study systems of traveling continuum modeling the web as a thin elastic plate of brittle material, traveling between a system of supports at a constant velocity, and subjected to bending, in-plane tension and small initial cracks. We study crack growth under cyclic in-plane tension and transverse buckling of the web analytically. We seek optimal in-plane tension that maximizes a performance vector function consisting of the number of cycles before fracture, the critical velocity and process effectiveness. The present way of applying optimization in the studies of fracture and stability is new and affords an analytical tool for process analysis. peerReviewed

Mechanical and Thermal Stability of Adhesive Membranes with Nonzero Bending Rigidity

2010

Membranes at a microscopic scale are affected by thermal fluctuations and self-adhesion due to van der Waals forces. Methods to prepare membranes of even molecular scale, e.g., graphene, have recently been developed, and the question of their mechanical and thermal stability is of crucial importance. To this end we modeled microscopic membranes with an attractive interaction and applied Langevin dynamics. Their behavior was also analyzed under external loading. Even though these membranes folded during isotropic compression as a result of energy minimization, the process at high confinement was similar to crumpling of macroscopic nonadhesive sheets. The main difference appeared when the com…

Epoxy composites filled with high surface area-carbon fillers

2013

Citation: J. Appl. Phys. 114, 164304 (2013); doi: 10.1063/1.4826529 (Received 24 July 2013; accepted 6 October 2013; published online 22 October 2013) A comprehensive analysis of electrical, electromagnetic (EM), mechanical, and thermal properties of epoxy resin composites filled with 0.25–2.0 wt. % of carbon additives characterized by high surface area, both nano-sized, like carbon nanotubes (CNTs) and carbon black (CBH), and micro-sized exfoliated graphite (EG), was performed. We found that the physical properties of both CNTs- and CBH-based epoxy resin composites increased all together with filler content and even more clearly for CBH than for CNTs. In the case of EG-based composites, go…

Comment on “High-Pressure Elasticity ofα-Quartz: Instability and Ferroelastic Transition”

2000

Compressibility and structural stability of ultra-incompressible bimetallic interstitial carbides and nitrides

2012

We have investigated by means of high-pressure x-ray diffraction the structural stability of Pd 2Mo 3N, Ni 2Mo 3C 0.52N 0.48, Co 3Mo 3C 0.62N 0.38, and Fe 3Mo 3C. We have found that they remain stable in their ambient-pressure cubic phase at least up to 48 GPa. All of them have a bulk modulus larger than 330 GPa, the least compressible material being Fe 3Mo 3C, B 0 = 374(3) GPa. In addition, apparently a reduction of compressibility is detected as the carbon content is increased. The equation of state for each material is determined. A comparison with other refractory materials indicates that interstitial nitrides and carbides behave as ultra-incompressible materials. © 2012 American Physic…