Search results for "Strip"

On the Measurement and Prediction of the Out-of-Plane Displacement Surrounding Cold-Expanded Holes

2010

Experimental measurements of the out-of-plane displacement surrounding cold-expanded holes in a 6082-T6 aluminum alloy were made with a 3D optical scanner using the technique of the encoded light-pattern projection in white light. The measured surface profiles have shown the thickness discontinuity along the hole edge due to the effect of the split in the sleeve. An analytical–numerical solution of the out-of-plane displacement is presented based on existing analytical models. Thus, the results given by the analytical model were then compared with the experimental data and with a finite element (FE) model that simulates the cold-expansion process. The location of the elastic–plastic boundar…

The role of chemical cues in the host finding behaviour of Trissolcus basalis from a Conservation Biological Control perspective

In assessing successful biological control programs by parasitoids, the knowledge of important traits, such as the host finding capability, i.e. the ability to find host and food resources, play the key role. Moreover, parasitoids in their natural environment parasitoids deal with a variable mixtures of natural cues. Some chemical cues are used by the wasps to locate their hosts, some ones drive wasps to feeding resources. The parasitoid response to these cues can fluctuate according to biotic factors and abiotic condition. This dissertation focus in details on the role of two important tools, such as selective flowering plants as food resources to add within a crop area and the traces left…

Diel feeding habits of juveniles of Mullus surmuletus (Linneo, 1758) in the lagoon of the Stagnone di Marsala (Western Sicily, Italy)

1999

Diet composition, feeding rhythm, gastric evacuation rate and daily ration were investigated in juvenile Mulhis surmuletus (Linneo, 1758). Fish were collected in the lagoon of the Stagnone di Marsala in western Sicily, in July 1995, during a 24 h sampling period. Copepoda, Polychaeta, Amphipoda and Tanaidacea were shown to be the most frequent prey items. The feeding index values showed two different daily feeding times. A unimodal trend in the daily rhythm of food consumption was derived, with a peak in feeding between 1200 and 2000 h. Gastric evacuation in juvenile M. surmuletus is best described by an exponential model, with a gastric evacuation rate R = 0.66 g h-1 (r = 0.88) (T = 24.45 …

Integrating mechanistic models and climate change projections to predict invasion of the mussel, Mytilopsis sallei, along the southern China coast

2021

Species invasion is an important cause of global biodiversity decline and is often mediated by shifts in environmental conditions such as climate change. To investigate this relationship, a mechanistic Dynamic Energy Budget model (DEB) approach was used to predict how climate change may affect spread of the invasive mussel Mytilopsis sallei, by predicting variation in the total reproductive output of the mussel under different scenarios. To achieve this, the DEB model was forced with present-day satellite data of sea surface temperature (SST) and chlorophyll-a concentration (Chl-a), and SST under two warming RCP scenarios and decreasing current Chl-a levels, to predict future responses. Und…

Sequestering ability of landfill leachate towards toxic metal ions

2017

The great part of municipal solid wastes is worldwide stored in sanitary landfills. The interaction of organic and inorganic wastes with rainwater produces in the landfill a leachate of extremely variable composition. It depends on several variables such as the type of wastes, the age of landfill, the pH, the redox potential, etc [1-2]. Four are the recognized categories of pollutants in landfill leachate: inorganic macrocomponents, dissolved organic matter (DOM), heavy metals and xenobiotic organic compounds [3]. In particular, heavy metals (arsenic, cadmium, copper, lead, mercury, etc.) are usually present at concentration of few ppb and up to some ppm. A variable but consistent fraction …

NiO@Ni core shell for electrochemical detection of Hg ions

2018

Heavy metals are considered as one of the most dangerous chemicals for human health. Among heavy metals, mercury is one of the most dangerous one: few ppb of Hg can cause serious damages to brain, heart, lungs and kidney. The Environmental Protection Agency setted the maximum concentration of Hg in water as 2 ppb [1] . Nowadays is very important to develop new and novel sensors for heavy metals that could be cheap, easy to use and for in-situ and real-time analysis and in this context electrochemical sensors are perfect candidates [2] . The more powerful electrochemical tequinique is Square Wave Anodic Strippic Voltammetry (SWASV), a two step techinique were the heavy metals are first depos…

Ni/NiO thin film Sensors for Mercury ions detection by Square wave anodic stripping voltammetry

2018

Square wave anodic stripping voltammetry (SWASV) is considered a very interesting electrochemical method for heavy metals detection in comparison to conventional techniques [1]. The main features of this technique are the high sensitivity and reproducibility (standard deviation lower than 5%), besides, the limit of detection is in the ppb level so is comparable with standard techniques such as AAS or ICP, the instrumentation is very inexpensive and easy to use and the detection time is very low. Among heavy metals, mercury is one of the most toxic for both environment and humans. In fact, it may cause serious health problems to brain, kidney and DNA. The concentration limit imposed by US En…

Reverse electrodialysis with NH4HCO3-water systems for heat-to-power conversion

2017

Abstract A Reverse ElectroDialysis Heat Engine (REDHE) system operating with “thermolytic” ammonium hydrogen-carbonate (NH4HCO3) aqueous solutions as working fluids is studied. The engine is constituted by (i) a RED unit to produce electric power by mixing the solutions at different salinity and (ii) a thermally-driven regeneration unit including a stripping and an absorption column to restore the initial salinity gradient thus closing the cycle. In the present work only the RED unit and the stripping column are taken into account. In particular, a simplified integrated process model for the whole cycle was developed: it consists of (i) a lumped parameter model for the RED unit validated wi…

Biochar from byproduct to high value added material – A new adsorbent for toxic metal ions removal from aqueous solutions

2018

Abstract An activated biochar coming from pyrolysis of dead Posidonia oceanica residues has been tested as adsorbent material for Cd2+, Pb2+ and Cu2+ ions. The biomass, the activated and the non activated biochars were previously characterized by using several instrumental techniques. The pH of metal ion solution in kinetic and thermodynamic adsorption experiments was fixed at 5 whilst, the dependence on ionic medium, ionic strength and temperature have been evaluated carrying out batch experiments at different experimental conditions. Differential Pulse Anodic Stripping Voltammetry and Inductively Coupled Plasma Optical Emission Spectroscopy have been used to measure the metal ion concentr…

Ferromagnetism and Chirality in Two-Dimensional Cyanide-Bridged Bimetallic Compounds

2002

The combination of hexacyanoferrate(III) anions, [Fe(CN)(6)](3)(-), with nickel(II) complexes derived from the chiral ligand trans-cyclohexane-1,2-diamine (trans-chxn) affords the enantiopure layered compounds [Ni(trans-(1S,2S)-chxn)(2)](3)[Fe(CN)(6)](2).2H(2)O (1) and [Ni(trans-(1R,2R)-chxn)(2)](3)[Fe(CN)(6)](2).2H(2)O (2). These chiral systems behave as ferromagnets (T(c) = 13.8 K) with a relatively high coercive field (H(c) = 0.17 T) at 2 K. They also exhibit an unusual magnetic behavior at low temperatures that has been attributed to the dynamics of the magnetic domains in the ordered phase.