Search results for "Structural Engineering"
showing 10 items of 1998 documents
Control of activated sludge settleability using preaeration and preprecipitation
1993
This paper deals with the addition of a preaeration and a preprecipitation stage to a conventional activated sludge process. The experiments were carried out in a pilot plant using wastewater from the city of Valencia (Spain) as feed. The effect of the F/M ratio and sludge age on sludge settleability was established. In both cases, process stability was observed to increase with respect to the conventional process. Good sludge settleability was thus assured in a greater F/M ratio range. A comparative economic study was also carried out.
Iron enrichment from hypoxic hypolimnion supports the blooming of Raphidiopsis raciborskii in a tropical reservoir.
2022
Occurring worldwide, blooms of Raphidiopsis raciborskii threaten the use of water resources especially in tropical and subtropical waterbodies. Its high flexibility in the uses of light and macronutrients (C, N, P) frustrates any bloom prediction and control based on macronutrients regulation. To identify the critical factors promoting periodic blooms of R. raciborskii, the trends of meteorological, hydrodynamic, physical, and chemical variables (including macro- and micronutrients: N, P, Fe) were analyzed in a Chinese tropical large reservoir (Dashahe reservoir) over five years. It was hypothesized that Fe availability, mediated by the mixing pattern of the reservoir, played a crucial role…
Transient response of a TLP-type floating offshore wind turbine under tendon failure conditions
2021
Abstract Among various types of floating offshore wind turbines (FOWTs), the tension leg platform (TLP) floating wind turbines have relatively small motions due to stiff tendons. Similar to TLP applications in the offshore industry, tendon failure may lead to deteriorated stability and large transient responses, which should be considered as part of accidental limit state (ALS) checks at the design stage of the TLP FOWTs. This paper takes the WindStar TLP system as a representative and investigates the transient effects of one-tendon failure on the system responses. A coupled numerical model is first established using the aero-hydro-servo-elastic simulation tool FAST. Subsequent numerical s…
Evaluating the thermal-radiative performance of ENVI-met model for green infrastructure typologies: Experience from a subtropical climate
2022
Abstract Microclimate knowledge has been intensively integrated into urban planning and design to improve the buildings’ energy performance and outdoor thermal comfort. To assess the climatic mitigation strategies, numerical modeling is gaining higher relevance. ENVI-met, a microclimate model to simulate the complex surface-vegetation-atmosphere interactions in the built environment, is receiving increasing popularity. This study aims to systematically evaluate the thermal-radiative performance of the ENVI-met model based on its recent updates. First, a field measurement was conducted in a subtropical city. Thermal-radiative parameters were collected besides three green infrastructure (GI) …
Nitrification of anaerobically pretreated municipal landfill leachate at low temperature
2000
Abstract Nitrification of anaerobically pretreated municipal landfill leachate (270–1000 mg COD l −1 , 53–270 mg NH 4 –N l −1 ) was studied in laboratory-scale activated sludge reactors without (AS) and with (ASC) the addition of plastic carrier material. The reactors were run at 10°C (149 d), 7°C (21 d) and 5°C (16 d). With a loading rate of 0.027 g NH 4 –N g MLVSS −1 d −1 and a hydraulic retention time of ca. 3 d, at 10°C, complete nitrification was obtained in both reactors. At 7°C, and in loading rate of 0.023 g NH 4 –N g MLVSS −1 d −1 , both reactors appeared to be overloaded and ammonium removal was only ca. 93%. At 5°C, with a lower loading rate of 0.010 g NH 4 –N g MLVSS −1 d −1 …
Semi-continuous anaerobic digestion of solid poultry slaughterhouse waste: effect of hydraulic retention time and loading.
2002
Abstract We studied the effect of hydraulic retention time (HRT) and loading on anaerobic digestion of poultry slaughterhouse wastes, using semi-continuously fed, laboratory-scale digesters at 31°C. The effect on process performance was highly significant: Anaerobic digestion appeared feasible with a loading of up to 0.8 kg volatile solids (VS)/m 3 d and an HRT of 50–100 days. The specific methane yield was high, from 0.52 to 0.55 m 3 /kg VS added . On the other hand, at a higher loading, in the range from 1.0 to 2.1 kg VS/m 3 d, and a shorter HRT, in the range from 25 to 13 days, the process appeared inhibited and/or overloaded, as indicated by the accumulation of volatile fatty acids an…
Electrochemical oxidation of organics in water: Role of operative parameters in the absence and in the presence of NaCl
2008
The electrochemical oxidation of organics in water was investigated theoretically and experimentally to determine the role of several operative parameters on the performances of the process in the presence and in the absence of sodium chloride. Theoretical considerations were used to design the experimental investigation and were confirmed by the results of the electrochemical oxidation of oxalic acid (OA) at boron doped diamond (BDD) or IrO(2)-Ta(2)O(5) (DSA-O(2)) anodes in a continuous batch recirculation reaction system equipped with a parallel plate undivided electrochemical cell. Polarization curves and chronoamperometric measurements indicated that, in the presence of chlorides, the a…
The miniaturised emission chamber system and home-made passive flux sampler studies of monoaromatic hydrocarbons emissions from selected commercially…
2017
Abstract The estimation of the emission rate of organic compounds released from various types of indoor materials can be performed using stationary environmental test chambers (ETC) classified as ex-situ methods or small-scale portable analytical devices based on the use of passive technique at the stage of analytes sampling from the gaseous phase (in-situ methods). The paper presents results of emissions of selected organic compounds from the monoaromatic hydrocarbons group (benzene, toluene, ethylbenzene, p,m-xylene and styrene) emitted from the surfaces of various types of commercially-available floor coverings and the underlay made of polyurethane foam which might be installed indoors u…
Vapour condensation and moisture accumulation in porous building wall
2002
Simultaneous one-dimensional heat and vapour transfer with condensation in a porous wall is analytically investigated. Spatially steady-state distribution of accumulated moisture, less than the critical content, is described. Closed-form analytical expressions for the temperature, condensation rate and moisture content are obtained. The presented model requires material properties which are relatively simple and easy to determine. The results of the paper are illustrated with an example of multilayer building wall under climatic conditions.
Effect of surface finish on the mechanical behaviour of Dacron© 360 woven
2013
Abstract In the present paper some experimental analyses of Dacron© 360 woven with and without surface treatment are presented to evaluate the effect of this treatment on the constitutive behaviour. This woven, widely adopted in sail manufacturing, is obtained by weaving polyethylene terephthalate (PET) yarn and it shows some peculiar features due to the manufacturing process. The experimental tensile tests, clearly show the orthotropy behaviour of the material. The effect of the treatment results in a stiffer behaviour especially along the warp and bias direction and in an increment of ultimate strength in all directions.