Search results for "Structural Engineering"
showing 10 items of 1998 documents
An optimal dimensioning method of a green wall structure for noise pollution reduction
2021
International audience; This paper concern the optimization of a multilayered green wall structure including substrate and foliage in order to reduce as much as possible backward noise reflection and forward transmission from the wall. Each component involved in the wall structure is fully characterized experimentally to get its transfer matrix. Simulation demonstrated that foliage layer superimposed to substrate layer doesn’t affect the transmission losses but contributes greatly to the increase of return losses of the green wall structure. To achieve the best performances in terms of return and forward losses as well as frequency bandwidth, the methods of optimization are discussed inclu…
Application of a new dynamic transport model to predict the evolution of performances throughout the nanofiltration of single salt solutions in conce…
2018
Although many knowledge models describing the rejection of ionic compounds by nanofiltration membranes are available in literature, they are all used in full recycling mode. Indeed, both permeate and retentate streams are recycled in order to maintain constant concentrations in the feed solution. However, nanofiltration of real effluents is implemented either in concentration or diafiltration modes, for which the permeate stream is collected. In these conditions, concentrations progressively evolve during filtration and classical models fail to predict performances. In this paper, an improvement of the so called "Donnan Steric Pore Model", which includes both volume and concentration variat…
Flexural behaviour of external R/C steel fibre reinforced beam-column joints
2011
ABSTRACT A softened strut-and-tie macro model able to reproduce the flexural behaviour of external beam-column joint is presented. The model is specific for concrete with hooked steel fibres (FRC) and it is designed to calculate the flexural response, as load-deflection curve, of a beam-column sub-assemblages. The model considers the presence of a constant vertical load acting on the column and of a monotonically increasing lateral force applied at the tip of the beam.
Metal ion adsorption by phomopsis sp. Biomaterial in laboratory experiments and real Wastewater Treatments
2005
An insoluble material of polysaccharidic nature has been obtained by thermal alkali treatment of the filamentous fungus Phomopsis sp. FT-IR spectrum of the resulting material as well as its nitrogen content suggest that chitosan and glucans are the main components of the biomaterial. Information on Lewis base sites has also been obtained and used as a guideline in the evaluation of the complexing ability against a number of metal ions in aqueous media at pH in the range 4--6. Results indicate that after 24h contact time, up to 870 micromol/g of lead, 390 micromol/g of copper, 230 micromol/g of cadmium, 150 micromol/g of zinc and 110 micromol/g of nickel ions are adsorbed into the material. …
Evaluation of a microclimate model for predicting the thermal behavior of different ground surfaces
2013
The microclimate model ENVI-met Version 4 was evaluated with field data in terms of the thermal behavior of different types of ground surface. A field experiment was conducted in a real construction project in Guangzhou, South China, from 29 August to 2 September in 2010. The surface types of concrete, tile, asphalt and grass were investigated. The comparison between observation and prediction was performed for both sub- and above-surface variables, including soil temperature at different depths, soil heat flux at the surface, surface temperature, and air temperature and humidity at different heights. The results show that the ENVI-met model is capable of reasonably modelling the diurnal th…
Winter and summer analysis of daylight characteristics in offices
2014
Abstract This paper reports a comparison of the results of daylight measurements carried out in summer and winter in three offices, with different exposures and characteristics, located in Naples (Italy). The aim was to extend and enrich the findings of a previous study which reported the results of summer measurements about desk illuminances and circadian impact. The research project includes measurements carried out in other seasons and a comparison between measured and software simulated values with the final goal of developing design guidelines. This research confirmed that the spectral distributions and CCTs of the light reaching the eye of a person seated at the desk in these offices …
Contamination of a hospital plumbing system by persister cells of a copper-tolerant high-risk clone of Pseudomonas aeruginosa
2019
Abstract Background Pseudomonas aeruginosa (PA) is an important opportunistic pathogen that thrives best in the distal elements of plumbing and waste-water systems. Although nosocomial outbreaks of PA have been associated with water sources, the role of the plumbing system of healthcare premises as a reservoir for this pathogen is still unclear. Materials and methods We collected water samples from 12 technical areas, distant from any medical activity, in a teaching hospital in France once a week for 11 weeks. We used a method that resuscitates persister cells because of the nutrient-poor conditions and the presence of inhibitors (e.g. chlorine and copper ions). Briefly, water was sampled i…
Treatment of leachate from MSWI bottom ash landfilling with anaerobic sulphate-reducing process
2007
Abstract Removal of sulphate and toxic elements from the leachate of a field landfill lysimeter ( 112 m 3 ) , containing municipal solid waste incineration (MSWI) bottom ash, was studied. The leachate was treated in two parallel laboratory upflow anaerobic sludge blanket (UASB) reactors without and with ethanol as additional carbon source. With ethanol more than 65% of sulphate was removed, while without ethanol removal was negligible. The treatment removed Ba, Ca, Cu, Mn, Mo, Ni, Pb, Tl, Sb, Se, Sr, and Zn of the studied 35 trace and other elements. The sequential extraction of the reactor sludge at the end of runs confirmed that with a few exceptions (Ba, Ca, and Cu) the main mechanism by…
Calibration of denitrifying activity of polyphosphate accumulating organisms in an extended ASM2d model
2010
Abstract This paper presents the results of an experimental study for the modelling and calibration of denitrifying activity of polyphosphate accumulating organisms (PAOs) in full-scale WWTPs that incorporate simultaneous nitrogen and phosphorus removal. The convenience of using different yields under aerobic and anoxic conditions for modelling biological phosphorus removal processes with the ASM2d has been demonstrated. Thus, parameter ηPAO in the model is given a physical meaning and represents the fraction of PAOs that are able to follow the DPAO metabolism. Using stoichiometric relationships, which are based on assumed biochemical pathways, the anoxic yields considered in the extended A…
Electrocoagulation treatment of peat bog drainage water containing humic substances
2015
Abstract Electrocoagulation (EC) treatment of 100 mg/L synthetic wastewater (SWW) containing humic acids was optimized (achieving 90% CODMn and 80% DOC removal efficiencies), after which real peat bog drainage waters (PBDWs) from three northern Finnish peat bogs were also treated. High pollutant removal efficiencies were achieved: Ptot, TS, and color could be removed completely, while Ntot, CODMn, and DOC/TOC removal efficiencies were in the range of 33–41%, 75–90%, and 62–75%, respectively. Al and Fe performed similarly as the anode material. Large scale experiments (1 m3) using cold (T = 10–11 °C) PBDWs were also conducted successfully, with optimal treatment times of 60–120 min (applying…