Search results for "Structural engineering"
showing 10 items of 1998 documents
Study of the Formability of Laminated Lightweight Metallic Materials
2017
The main objective of this work was to test the formability of laminated materials. Laminated materials are considered a good choice when parts with reduced weight are considered. Thus, a laminated material, aluminum - polypropylene - aluminum (Al-PP-Al), as sheet 1.2 mm and 1.4 mm thickness was used. Before processing the material by means of unconventional plastic deformation, its formability was determined by running the Nakajima test. After obtaining the forming limit curves, the material was machined by means of incremental forming.
On the influence of the supporting frame on the nuclear response of the Helium-Cooled Lithium Lead Test Blanket Module for ITER
2006
Abstract Within the European Fusion Technology Programme, very intense research activities have been promoted on the Helium-Cooled Lithium Lead (HCLL) breeding blanket concept with the specific aim of manufacturing a Test Blanket Module (TBM) to be irradiated in ITER. HCLL-TBM is foreseen to be located in an ITER equatorial port, being housed inside a proper steel-supporting frame. In particular, since that frame has been designed to provide two cavities separated by a dividing plate and HCLL-TBM is foreseen to fill just one of them, its nuclear response could vary accordingly to the filling status of the other one, unless the dividing plate is thick enough to isolate the components housed …
A new representation of power spectral density and correlation function by means of fractional spectral moments
2009
In this paper, a new perspective for the representation of both the power spectral density and the correlation function by a unique class of function is introduced. We define the moments of order gamma (gamma being a complex number) of the one sided power spectral density and we call them Fractional Spectral Moments (FSM). These complex quantities remain finite also in the case in which the ordinary spectral moments diverge, and are able to represent the whole Power Spectral Density and the corresponding correlation function.
Feasibility of D-D start-up under realistic technological assumptions for EU-DEMO
2021
Abstract One of the main issues in view of the realization of a DEMOnstration fusion reactor is the availability of a sufficient external supply of tritium (T) to start operation. T is an unstable nuclide, which is almost absent in nature and is currently available as by-product in e.g. CANDU, whose operation in the next decades (both in terms of life extension of existing reactors and construction of new ones) is at the moment under debate. During DEMO operation, T will be generated on-site by breeding blanket, employing the neutrons originating from D-T reaction. However, it is considered that a certain initial amount of T is needed to start operation, the so-called start-up inventory. An…
Structural verification and manufacturing procedures of the cooling system, for DEMO divertor target (OVT)
2019
The paper presents the design activities and testing plan of a vertical target mock-up, developed within the pre-conceptual design phase for DEMO Work Package DIV-1 “Divertor Cassette Design and Integration” - EUROfusion Power Plant Physics & Technology (PPPT) program. Activities concerning the Divertor Outboard Vertical Target cooling mock-up are presented in term of CAD model, thermal-hydraulic numerical simulation, structural analysis, structural integrity verification and manufacturing procedure. Moreover, the mechanical dimensions of support systems for Plasma Facing Components (PFCs), manifold and diffuser have been analyzed in detail, in order to avoid structural fault during the tes…
Further improvements in the structural analysis of DEMO Divertor Cassette body and design assessment according to RCC-MRx
2019
Abstract This paper presents the enhancements related to the structural analyses of DEMO Divertor in the framework of the EUROfusion Power Plant Physics & Technology (PPPT) program. This activity started two years ago and its preliminary results were published in previous papers. It has been divided in some areas defined by the similarity of the matters they contain: the structural analysis, of utmost importance, has been preceded by a preliminary phase, like the geometry definition or the thermal and the electric-magnetic analysis for loads evaluation; then the structural analysis has been finally confirmed with further evaluations related to excessive deformation or plastic instability. T…
Cost-Benefit Analysis for Hydropower Production in Water Distribution Networks by a Pump as Turbine
2014
AbstractThe use of microhydroelectric plants in urban pipe networks, based on the combination of a pump as turbine (PAT), two regulating valves, and two pressure meters, is proposed along with simple automation rules. Its economic benefit is tested on a small pipe network, where the network geometry as well as the demand coefficient variation in time and space have been inferred from previously collected data and existing analysis. A similar analysis has been also carried out for different scenarios in which the reduction of pipe installation cost due to a diameter reduction is compared with the increased benefit in energy production. The case study shows that a small increment of the pipe …
Modelling biological and chemically induced precipitation of calcium phosphate in enhanced biological phosphorus removal systems
2011
The biologically induced precipitation processes can be important in wastewater treatment, in particular treating raw wastewater with high calcium concentration combined with Enhanced Biological Phosphorus Removal. Currently, there is little information and experience in modelling jointly biological and chemical processes. This paper presents a calcium phosphate precipitation model and its inclusion in the Activated Sludge Model No 2d (ASM2d). The proposed precipitation model considers that aqueous phase reactions quickly achieve the chemical equilibrium and that aqueous-solid change is kinetically governed. The model was calibrated using data from four experiments in a Sequencing Batch Rea…
Study of new joining technique: flat clinching
2007
In this paper a development of clinching, called flat clinching, is presented. After a press clinching process, the joined sheets have been deformed by a punch with a lower diameter against a flat die. In this way a new configuration is created with a geometry that has no discontinuity on the external surface (bottom). A new procedure has also been tested: the second step is perfomed by pressing the joint between two flat dies. This second case has revealed itself to be very effective.Tensile tests have been done to compare the joints strength among the various joining techniques. Moreover some joints have been cut to analyse the changing of the contact line shape and how its characteristic…
Optimal manufacturing and mechanical characterization of high performance biocomposites reinforced by sisal fibers
2018
Abstract The increasing interest about eco-sustainable materials in the industrial production (automotive, civil construction, packaging), has led to the increase of the research works dealing with biocomposites. However, until now the most attention has been devoted to the development of short fiber biocomposites for non-structural applications, whereas only a few works have considered high performance biocomposites for structural applications. Consequently, the development of structural biocomposites from robust natural fibers, as sisal fibers, is a result expected from the scientific community, but not yet achieved. In order to give a contribution to the implementation of high performanc…