Search results for "Supercritical carbon dioxide"
showing 10 items of 93 documents
Enzymatic, physicochemical, nutritional and phytochemical profile changes of apple (Golden Delicious L.) juice under supercritical carbon dioxide and…
2018
The impact of supercritical carbon dioxide (SCCD) (10-60 MPa/45 °C/30 min) and subsequent 10 weeks storage at 4 °C on polyphenol oxidase (PPO), peroxidase (POD) activities, phenolic profile, vitamin C, sugars, physicochemical properties of cloudy apple juices was investigated. No significant changes in sugars and total polyphenols were observed, whereas significant degradation (≈28%) of vitamin C and individual polyphenols (≈18%) was noted after SCCD treatment. After 4 weeks storage only 34% of vitamin C was retained and no vitamin C was detected after this time. Ten weeks of storage caused hydrolysis of sucrose in 15%, whereas degradation of individual polyphenols ranged from 43 to 50% dep…
Multilayered supported ionic liquids as catalysts for chemical fixation of carbon dioxide
2011
Multilayered, covalently supported ionic liquid phase (mlc-SILP) materials were synthesized by using a new approach based on the grafting of bis-vinylimidazolium salts on different types of silica or polymeric supports. The obtained materials were characterized and tested as catalysts in the reaction of supercritical carbon dioxide with various epoxides to produce cyclic carbonates. The material prepared by supporting a bromide bis-imidazolium salt on the ordered mesoporous silica SBA-15 was identified as the most active catalyst for the synthesis of cyclic carbonates and displayed improved productivity compared with known supported ionic liquid catalysts. The catalyst retained its high act…
Evaluating the impact of supercritical-CO2 pressure on the recovery and quality of oil from “horchata” by-products: Fatty acid profile, α-tocopherol,…
2019
Abstract The effect of supercritical carbon dioxide (SC-CO2) (10–40 MPa) and conventional extraction (CE) to recover oil from by-products obtained during “horchata” production was assessed. To evaluate both extraction techniques, the fatty acid composition, polyphenols, α-tocopherol, antioxidant capacity and lipid oxidation parameters of the extracts obtained were analysed. A linear relationship between extraction pressure and oil yield was observed. However, the highest oil yield was obtained under conventional extraction. The by-products from “horchata” presented a profile where monounsaturated fatty acids (MUFA) were the predominant, representing ≈ 70% of total fatty acids. The amount of…
Complexation of phosphine ligands with peracetylated β-cyclodextrin in supercritical carbon dioxide: Effect of temperature and cosolvent on the equil…
2009
Abstract The interaction between peracetylated-β-cyclodextrin and tert-butyl and adamantyl functionalized triphenylphosphine derivatives was studied in supercritical carbon dioxide (scCO 2 ) based solvent media by UV–vis spectroscopy. The equilibrium constant for a 1:1 complexation reaction was obtained from titration spectra both in pure carbon dioxide and in the presence of methanol as a cosolvent in the temperature range 308–323 K to estimate the internal energy and entropy of the inclusion equilibrium. The values of the equilibrium constants were found significantly smaller than those obtained in aqueous solution with analogous phosphines and substantially independent of the nature of t…
A continuous reaction system to investigate dispersion polymerization of vinyl monomers in supercritical carbon dioxide
2006
A laboratory-scale continuous reaction system using a stirred tank reac- tor was assembled in our laboratory to study the dispersion polymerization of vinyl monomers in supercritical carbon dioxide (scCO2). The apparatus was equipped with a suitable downstream separation section to collect solid particles entrained in the effluent stream from the reactor, whose monomer concentration could be measured online with a gas chromatograph. The dispersion polymerization of methyl methacry- late in scCO2 was selected as a model process to be investigated in the apparatus. The experiments were performed at 65 8C and 25 MPa with 2,2 0 -azobisisobutyroni- trile as the initiator and a reactive polysilox…
Polymerization of vinylidene fluoride with perfluoropolyether surfactants in supercritical carbon dioxide as a dispersing medium
2006
The heterogeneous polymerization of vinylidene fluoride (VDF) was investigated at 50 °C with supercritical carbon dioxide (scCO 2 ) as a dispersing medium and diethylperoxidicarbonate as an initiator in the presence of different perfluoropolyether surfactants. When FLK 7004A ammonium carboxylate salts were used at a 5% (w/w) concentration with respect to VDF, with an initial pressure of 31-45 MPa and with an olefin concentration of about 5.5 mol/L, monomer conversions up to 63% were obtained, corresponding to a final solid content higher than 200 g/L, and the polymer was collected at the end of the process in the form of a white powder completely composed of microspheres. The effects of the…
The morphology of block copolymer micelles in supercritical carbon dioxide by small-angle neutron and x-ray scattering
1997
Above its critical point, carbon dioxide forms a super-critical fluid, which promises to be an environmentally responsible replacement for the organic solvents traditionally used in polymerizations. Many lipophilic polymers such as polystyrene (PS) are insoluble in CO2, though polymerizations may be accomplished via the use of PS-fluoropolymer stabilizers, which act as emulsifying agents. Small-angle neutron and X-ray scattering have been used to show that these molecules form micelles with a CO2-phobic PS core and a CO2-philic fluoropolymer corona. When the PS block was fixed in length and the fluorinated corona block was varied, the number of block copolymer molecules per micelle (six to …
Supercritical-fluid extraction of chlorofluoroalkanes from rigid polyurethane foams
1996
Abstract Preliminary results about a process for recovering expanding agents chlorofluoroalkanes (CFCs) both trapped in the cavities and dissolved in the polymer from rigid polyurethane foams are reported. The performances of liquid and supercritical carbon dioxide, and of CO2-propane supercritical mixtures were compared. Better results in terms of extraction time and amount of extracted CFCs were obtained with finely ground materials and supercritical propane-carbon dioxide fluids.
Industrial applications of the aggregation of block copolymers in supercritical CO 2 : a SANS study
2002
Industrial applications of supercritical carbon dioxide (scCO2) rely upon the rather selective and easily adjustable solvent ability of CO2. CO2 near the critical point is a poor solvent for high molecular weight (HMW) hydrocarbon polymers, while it is a very good solvent for amorphous fluorinated polymers. By increasing the pressure, CO2 becomes a good solvent even for HMW hydrogenated chains. Specially engineered amphiphilic di-block copolymers, with CO2-philic and CO2-phobic portions, are expected to undergo trough a monomer–aggregate transition when the solvent density of the scCO2 changes. Here small-angle neutron scattering (SANS) results are reported for a block copolymer dissolved i…
Modification of Polymers in Supercritical Carbon Dioxide
2003
The interaction of scFluids and polymers are governed by the intermolecular forces between solvent-solvent, solvent-polymer segment, and polymer segment-segment pairs. Because of its symmetry, within reasonable pressure values, CO2 does not have a dipole moment, but it does have a quadrupole moment significant over a much shorter distance than dipolar interactions. The quadrupole moment and the Lewis acidity of CO2 imparts to the carbon dioxide the peculiarity to be a solvent for selected classes of polymers like perfluorinated polyacrylates, polysiloxanes and polyether-polycarbonate diblock copolymers [1–3].