Search results for "Surfaces"

The first experimental values for the stopping power of 89Y ions in carbon, nickel and gold

2009

Abstract The stopping power values of 89 Y ions in carbon, nickel and gold were measured with accuracy to better than 5% in the energy range from 0.03 to 8.2 MeV/u. The newly developed B-TOF method was used for the measurements. The results are compared with theoretical and semi-empirical predictions. For this ion/absorber combination no prior experimental data are available.

A logarithmic multi-parameter model using gas sensor main and cross sensitivities to estimate gas concentrations in a gas mixture for SnO2 gas sensors

2007

Abstract In a metal-oxide semiconductor gas sensor, the sensitivity of the metal-oxide resistance to concentrations of reducing gases in the surrounding atmosphere is known to be related to adsorption and desorption of gas on the redox reactions between the gas and oxygen. Changes in the electric conductance due to these reactions were measured for tin dioxide semiconductor gas sensors. In this study, we propose a model of gas sensor responding behaviour using a relationship between sensor conductance and gas concentrations in a mixture. A least-squares method fit of measured data was applied to determining the values of coefficients. The proposed method uses main and cross sensitivities th…

Passivity Breakdown of Titanium in LiBr Solutions

2013

The passive behavior of titanium and its susceptibility to undergo localized attack in different LiBr solutions at 25 degrees C have been investigated using different electrochemical techniques: potentiodynamic polarization curves, potentiostatic passivation tests, EIS measurements and Mott-Schottky analysis. In low and moderately concentrated LiBr solutions, the breakdown potential E-b decreased with increasing bromide concentrations, while in highly concentrated LiBr solutions, E-b increased with increasing LiBr concentration. In the most concentrated LiBr solution (11.42M) Ti did not undergo passivity breakdown even at 9 V-Ag/AgCl. This observation can be explained by a a decrease in the…

Formation of a micropatterned titania photocatalyst by microcontact printed silicatein on gold surfaces

2012

The enzyme silicatein has been bioengineered to carry a thiol-bearing Au-affinity tag (Cys-tag) for direct immobilization on gold carriers in shortest time without the need for prior surface functionalization. Through microcontact printing, defined silicatein micropatterns were created on gold surfaces, facilitating the subsequent enzymatically controlled synthesis of photocatalytically active TiO(2).

Hydrogen and Deuterium Incorporation in ZnO Films Grown by Atomic Layer Deposition

2021

Zinc oxide (ZnO) thin films were grown by atomic layer deposition using diethylzinc (DEZ) and water. In addition to depositions with normal water, heavy water (2H2O) was used in order to study the reaction mechanisms and the hydrogen incorporation at different deposition temperatures from 30 to 200 °C. The total hydrogen concentration in the films was found to increase as the deposition temperature decreased. When the deposition temperature decreased close to room temperature, the main source of impurity in hydrogen changed from 1H to 2H. A sufficiently long purging time changed the main hydrogen isotope incorporated in the film back to 1H. A multiple short pulse scheme was used to study th…

Tomographic diagnostics of high-frequency electrodeless lamps in argon–mercury mixtures

2006

Tomographic reconstruction of spatial profiles of the mercury atom density in the excited state 7 3S1 in high-frequency electrodeless lamps (HFELs) has been performed. The measurements of the Hg 546.1 nm line emission intensity have been made for the HFELs in argon–mercury mixture depending on the operation regime with different cold spot temperatures in the range 31–98 °C. The maximum entropy-based algorithm was applied for the reconstruction of local emission coefficients from the integrated intensities. The emission coefficients are directly related to the local values of the mercury atom density in the excited state 7 3S1, the upper state of the 546.1 nm transition. Such an investigatio…

On Intrinsic Negative Curves

2023

Review and comparison of experimental techniques used for determination of thin film electro-optic coefficients

2015

The results of electro-optic coefficient measurements performed with three commonly applied techniques used to assess electro-optic coefficients: the Mach–Zehnder, the Teng–Man, and the attenuated total reflectance technique are reported. It is shown that the signal obtained by the Mach–Zehnder and Teng–Man techniques is strongly influenced by the multiple internal reflection and piezo- and electrostrictive thickness change effects, which in our opinion have not been addressed sufficiently in the literature. A novel approach based on using Abeles matrix formalism is implemented for the retrieval of electro-optic coefficients from experimental data. The measurement results, errors, and compa…

Theoretical and experimental analysis of photonic structures for fluorescent concentrators with increased efficiencies

2008

In this study we present a theoretical and experimental analy- sis of the application of photonic band stop filters on top of photovoltaic fluorescent concentrators in order to increase the photon collection efficiency. The light guiding effect of the fluorescent concentrator relies on total internal reflection. The escape cone of total internal reflection is their major loss mechanism. Our ray tracing simulation allows to calculate the beneficial effect of photonic band stop reflection filters, which reduce these losses, and to simulate the angular distribu- tion of the light trapped in the concentrator. We present simula- tions of the optical properties of 1D and 3D photonic structures an…

Wear mechanisms and residual stresses in alumina-based laminated cutting tools

2005

Abstract The outstanding performances of the Al2O3 cutting tools in terms of potential cutting speed can lead to substantial economies in the machining of metallic materials. Nevertheless, their widespread use is limited by some drawbacks such as the tendency to edge chipping and to the propagation of microcracks, which can lead to premature failures. These shortcomings are due to the intrinsic low toughness of the ceramic material, which is in turn related to its characteristics non-metallic bonds. A well-recognised method of increasing the toughness of brittle materials is the introduction of surface compressive stresses, which can be obtained through a suitable lamination geometry of the…