Search results for "Surfaces"
showing 10 items of 2837 documents
Quantitative XPS analysis of leached layers on optical glasses
1993
The corrosion of optical glasses often reduces the utility of uncoated glasses as well as the adhesion of resistive coatings deposited onto corroded glasses. Photoelectron spectroscopy (XPS) was applied to study glass surfaces with respect to their surface corrosion. In particular, leaching by the influence of polish slurries, pure water, air and even residual gases inside a vacuum device was studied in detail. Pure quartz glass and different sodium and barium silicate glasses were broken in ultrahigh vacuum (4 × 10−10 mbar) for the determination of sensitivity factors of the different XPS signals. It was found that a quantitative determination of the surface composition of corroded and lea…
Solubilization of an Organic Solute in Aqueous Solutions of Unimeric Block Copolymers and Their Mixtures with Monomeric Surfactant: Volume, Surface T…
2008
The ability of aqueous systems, formed by unimeric copolymers and their mixtures with a monomeric surfactant, in solubilizing large quantities of 1-nitropropane (PrNO2) was explored. The copolymers are F68 and L64, which differ for the hydrophilicity, and the surfactant is sodium dodecanoate. For a better understanding of the mechanism of solubilization, thermodynamic (volume and differential scanning calorimetry), spectroscopy (steady-state fluorescence), viscosity, and interfacial investigations were carried out. PrNO2 causes the micellization of the unimeric copolymer, and the required amount of PrNO2 depends on the composition, the copolymer nature, and the temperature. Large quantities…
Thermodynamics of Solubilization of Pentanol in Sodium Dodecyl Sulfate-Dodecyldimethylamine Oxide Mixed Micelles
1994
Abstract Heat capacity and density measurements of pentanol (PeOH)-sodium dodecyl sulfate (NaDS)-dodecyldimethylamine oxide-water mixtures were carried out at 0.03 m PeOH as a function of the total surfactants concentration (mc) at different ratios (XNaDS). From experimental data, the apparent molar volumes (VΦ,R) and heat capacities (CΦ,R) of PeOH in the surfactants mixture solutions were calculated. As a general feature, at a given mixture composition, VΦ,R increases monotonically with mt as observed in pure surfactants. In the cases of XNaDS = 0.1 and 0.3, VΦ,R drops at about 0.1 and 0.15 mt respectively. The decreasing CΦ,R VS mt curve shows peculiarities which were ascribed to the pres…
Study of Redox Processes in Zeolite Y-Associated 2,4,6-Triphenylthiopyrylium Ion by Square Wave Voltammetry
2003
The electrochemical responses of 2,4,6-triphenylthiopyrylium ion (TTP+) in solution and attached to zeolite Y (TTP@Y) are described using cyclic and square wave voltammetries upon immersion of zeolite-modified polymer film electrodes in MeCN (LiClO4, Et4NClO4, and BuN4PF6 electrolytes) and aqueous (LiNO3, NaNO3, and KNO3 electrolytes) media. The electrochemistry of TTP@Y in contact with Bu4NPF6/MeCN is identical to that of TTP(BF4) in solution, with reduction processes at −0.25, −0.74, and −1.36 V vs SCE, and oxidation steps at +0.85 and +1.11 V. This response differs from those obtained for TTP@Y in Et4NClO4/MeCN and LiClO4/MeCN electrolytes. In contact with aqueous electrolytes, TTP@Y dis…
Ab Initio Liquid Water Dynamics in Aqueous TMAO Solution
2015
Ab initio molecular dynamics (AIMD) simulations in trimethylamine N-oxide (TMAO)-D2O solution are employed to elucidate the effects of TMAO on the reorientational dynamics of D2O molecules. By decomposing the O-D groups of the D2O molecules into specific subensembles, we reveal that water reorientational dynamics are retarded considerably in the vicinity of the hydrophilic TMAO oxygen (O(TMAO)) atom, due to the O-D···O(TMAO) hydrogen-bond. We find that this reorientational motion is governed by two distinct mechanisms: The O-D group rotates (1) after breaking the O-D···O(TMAO) hydrogen-bond, or (2) together with the TMAO molecule while keeping this hydrogen-bond intact. While the orientatio…
Volumes of Polar Additives in Aqueous Solutions of the Poly(ethylene oxide)13−Poly(propylene oxide)30− Poly(ethylene oxide)13 Triblock Copolymer at 2…
1999
Density measurements of poly(ethylene oxide)13−poly(propylene oxide)30−poly(ethylene oxide)13 (L64)−water and alcohol−L64−water systems were carried out at 293 and 301 K. The alcohols studied are propanol to pentanol and 2,2,2-trifluoroethanol (F3EtOH) to 2,2,3,3,4,4,4-heptafluorobutanol (F7BuOH). From the experimental data of the water−L64 binary system as functions of L64 concentration (mC), the partial molar volumes of L64 in the standard state and in the aqueous and micellar phases were calculated. At both temperatures L64 micelle is formed by a core of pure polypropylene oxide units and a hydrated shell of poly(ethylene oxide) units. In the case of the ternary systems, the apparent mol…
Fabrication of metal nano-structures using anodic alumina membranes grown in phosphoric acid solution: Tailoring template morphology
2007
Abstract The influence of experimental parameters on the morphology of the porous structure and on the formation kinetics has been investigated for anodic alumina membranes (AAM) grown in aqueous H 3 PO 4 at 160 V. It was found that pore aspect ratio and membrane porosity on the solution-side surface are influenced by tensiostatic charge, bath temperature and the presence of Al 3+ ions in solution. Morphological and kinetic data, recorded in different conditions, give useful information on the growth mechanism of pore channels in phosphoric acid solution. Nickel nano-structures have been fabricated using AAM as template. Electroless deposition, performed by adding the reducing agent to a su…
Micellization and Micellar Structure of a Poly(ethylene oxide)/Poly(propylene oxide)/Poly(ethylene oxide) Triblock Copolymer in Water Solution, As St…
1997
The micellization of the triblock copolymer Pluronic P85 (poly(oxyethylene)27/poly(oxypropylene)39/poly(oxyethylene)27) in aqueous solution was followed vs temperature and addition of aliphatic alcohols, using the spin probe technique. Different types of probes properly chosen (spin-labeled (SL) poly(oxyethylene(4))nonylphenol, SL-Pluronic L62, TEMPO-laurate, TEMPO-hexanoate, CAT 4, CAT 8, CAT 11, CAT 16, and 5-, 7-, 10-, and 12-doxylstearic acids) provided information about the micellar structure (polarity, viscosity, and order degree) at different radial locations. Micellization was found to be low at room temperature, even for 10% aqueous solutions, but strongly increasing with temperatu…
Chemical heterogeneities in nanometric titanomagnetites prepared by soft chemistry and studied ex situ : evidence for fe-segregation and oxidation ki…
2001
Nanocrystalline Fe-based spinels with composition Fe3-xTixO4 are synthesized using soft chemistry. Two steps are involved: precipitation in an aqueous solution followed by thermal annealing under a reducing mixture of N2/H2/H2O gases. Fe-segregation is found inside stoichiometric particles when the powders are studied ex situ; they exhibit a strong surface iron enrichment. This heterogeneity is related to kinetic effects linked to the difference of mobility between Fe2+ and Ti4+ cations during the partial oxidation of cations occurring ex situ. Stresses in the grains induced by oxidation govern the oxidation kinetics and lead to an abrupt compositional variation inside each particle. These…
Study of the Chemical Conversion of Aluminum Alloys by Coupling CFDE and EQCM
2004
The ability of the channel flow double electrode (CFDE) technique and electrochemical quartz crystal microbalance (EQCM) for studying in situ chromate phosphate conversion coating on 5182 aluminum alloys was explored. It was first demonstrated that aqueous Cr(VI) can be analyzed quantitatively with the CFDE technique by reduction into Cr(III) on a graphite electrode. Samples used for EQCM were quartz plated by physical vapor deposition using a 5182 alloy target, allowing thin layers of aluminum alloys with a similar chemical composition to be obtained. EQCM was adapted in order to account for the hydrodynamic conditions in an industrial process, by placing the quartz in a flow cell. In orde…