Search results for "Systems engineering"
showing 10 items of 1230 documents
Efficiency Enhancement of Permanent-Magnet Synchronous Motor Drives by Online Loss Minimization Approaches
2005
In this paper, a new loss minimization control algorithm for inverter-fed permanent-magnet synchronous motors (PMSMs), which allows for the reduction of the power losses of the electric drive without penalty on its dynamic performance, is analyzed, experimentally realized, and validated. In particular, after a brief recounting of two loss minimization control strategies, namely, the "search control" and the "loss-model control," both a new modified dynamic model of the PMSM (which takes into account the iron losses) and an innovative "loss-model" control strategy are presented. Experimental tests on a specific PMSM drive employing the proposed loss minimization algorithm have been performed…
Dielectric properties and ac conductivities of Bi1−xSmxFeO3 ceramics
2019
Dielectric permittivity, dielectric losses and ac-conductivity of polycrystalline Bi1−xSmxFeO3 (x = 0; 0.05; 0.1; 0.15; 0.2) are measured in the frequency range 1 kHz–10 MHz and in the temperature range 25–600 °C. Anomalies have been observed at the 200 °C, 300 °C and at the Néel temperature. It has been demonstrated that doping with Sm has enhanced the dielectric properties and increased conduction in the frequency region 1 MHz) and at a certain temperature Tm, depending on the composition Bi1−xSmxFeO3, the conductivity reaches a maximum. The results are discussed with reference to the model of correlated barrier hopping.
Improvement of the P/E window in nanocrystal memories by the use of high-k materials in the control dielectric
2005
Abstract In this paper nanocrystals memories program curves are shown and their saturation points (steady state condition) can be observed. We present a model that relates the voltage shift at the steady state ( Δ V T ss ) to the gate program voltage (VG). Starting from a good agreement between experimental data and simulations for nanocrystals memory cells with a conventional dielectric structure (SiO2), we present the estimated values of the Δ V T ss vs VG for different control stacks. Our investigation shows an improvement if a material with a high dielectric constant and a small conduction band-offset with respect to the SiO2, is placed between two SiO2 layers when the first of them is …
Germanium modified BaTiO3as a promising electroceramics
2016
ABSTRACTThe polycrystalline sample of BaTi0.95Ge0.05O3 was prepared by solid-phase reaction using a conventional method. The morphology of investigated sample was characterised by scanning electron microscopy (SEM). The results allowed to determining the stoichiometry of the material and evaluate their microstructure. High quality samples were investigated, the grains are well shaped without of a glassy phase. The dielectric properties of the BaTi0.95Ge0.05O3 ceramics were determined. The results were compared with these ones obtained for pure BaTiO3. The obtained data indicated that the substitution of Ge+4 ions had an influence on the values of the real (ϵ′) and imaginary (ϵ″) parts of el…
INFLUENCE OF ZIRCONIUM ON STRUCTURAL, MICROSTRUCTURAL AND FERROELECTRIC PROPERTIES OF BaZr0.20Ti0.80O3 CERAMIC
2009
ABSTRACT Barium zirconium titanate BaZrxTi1-xO3 ceramics have been obtained by conventional method. The X-ray diffraction analysis showed that the BaZr0.20Ti0.80O3 crystallizes in the cubic structure. The lattice parameter a increases with temperature, at temperature ∼308 K a small deviation is observed. The performed EDS study revealed that the samples were perfectly sintered and that the material was chemically homogeneous. It contains a little glassy phase and the grains are well shaped. The zirconium content (20 mol%) in the examined solid solution caused downward shift of the temperature T m . The increase of the achieved permittivity values ϵm was observed as well.
DIELECTRIC PROPERTIES OF LEAD-FREE [(1-x)(Na0.5Bi0.5)-xBa]Zr1−yTiyO3CERAMICS (x = 0.01, 0.06, 0.085, 0.09, 0.1 AND y = 0.96, 0.97)
2008
ABSTRACT Lead-free ceramics based on (Na0.5Bi0.5TiO3, NBT)-(Ba(Ti, Zr)O3, BTZ) were prepared by solid phase synthesis and hot pressing sintering process and their dielectric properties have been studied. The obtained results were compared with these for pure NBT. The obtained samples show pure perovskite structure. Low frequency (100 Hz-100 kHz) investigations reveal the diffuse phase transitions and relaxorlike behaviour. The obtained results are discussed in terms of inhomogeneity of ions distribution, their ferro- and antiferroactivity and internal stresses. The NBT-BTZ system is expected to be a new promising candidate for lead-free electronic ceramics.
The Effect of Bias Field on Dielectric Response in Lead Ferrotantalate Ceramics
2011
Studies of dielectric properties of PbFe1/2Ta1/2O3 ceramics at low- and infra-low-frequencies under bias field over a wide range of temperatures are reported. Applied bias field is found to broaden the ϵ′(Т) maxima shifting positions Тm of the maximums to higher temperatures. Additional anomalies in the dielectric response are revealed at T<Тm. The anomalies in the vicinity of Тm are related to structural change at phase transition, while those observed at TТm – to magneto-electric interactions in PbFe1/2Ta1/2O3.
PHASE TRANSITIONS IN Na1/2Bi1/2TiO3-SrTiO3-PbTiO3 SOLID SOLUTIONS
2009
ABSTRACT Studies of nature of polarization in ternary solid solutions of Na1/2Bi1/2TiO3-SrTiO3-PbTiO3 were done, using measurements of dielectric properties and polarization hysteresis loops. Various stages of relaxor behavior depending on concentration of PbTiO3 were established and compared with other known ferroelectric relaxors.
Dielectric Properties and Conductivity of Ferroelectric LixNa1-xTa 0.1Nb0.9O3 Solid Solutions
2011
Results of a study of dielectric properties and conductivity of ferroelectric perovskite solid solutions of the LixNa1-xTa0.1Nb0.9O3 (х = 0.03–0.135) series with the 290–700 K thermal range and frequencies from 25 to 106 Hz are reported. The charge in this kind of materials is shown to be transferred by Li+ ions the contribution from bulk transport of ions dominating. A first order phase transition close to the second order transitions proceeds in LixNa1-xTa0.1Nb0.9O3 solid solutions within the thermal range examined. The increase of Li concentration enhances the features of the second order transition.
PHASE TRANSITIONS IN THE PLZT x/85/15 SOLID SOLUTIONS
2008
ABSTRACT Role of a La on the nature of phase transition in the PLZT x/85/15 is compared with the PLZT compositions of lower Zr/Ti ratio. Thermal dependence of the dielectric permittivity, thermal expansion and elastic modulus reveal sequential transfer from macroscopic ferroelectric to antiferroelectric and nonpolar state, if La concentration is increased. Diffused, from frequency independent thermal dependence of dielectric permittivity for compositions in certain La concentration range above 4 at% coexist with the well expressed phase transition between paraelectric and antiferroelectric phases.