Search results for "T method"
showing 10 items of 1254 documents
Mixed mode energy release rates for bonded composite joints
2011
Abstract: Analytical formulae developed by Luo and Tong (2009) to determine the mixed mode strain energy release rates of laminated and co-cured composite structures and joints are reviewed. The effects of varying loading conditions and geometries on the mode mixity found analytically are investigated via a parametric study. A critical evaluation of the analytical formulae indicates that the formulae are robust in calculating the total strain energy release rate, but may underestimate the mode II component compared with the finite element analysis and experimental results. Possible reasons for this discrepancy are discussed, including the effect of stress concentrations and singularities at…
Competition between the buckling-driven delamination and wrinkling in compressed thin coatings
2012
Abstract The competition between two common failure modes of a thin coating under in-plane compression, the surface wrinkling and the buckling-driven delamination, is studied to assess the critical strain when the mechanical instability may occur at given geometrical and material parameters. A buckling map is constructed based on results of a finite element analysis, which relates the critical applied strain for the onset of instability to the interface adhesion and elastic properties of materials. An approximate scaling relation is derived for the energy release rate of buckling-driven delamination of a coating deposited on a compliant substrate.
Boundary Integral Formulation for Composite Laminates in Torsion
1997
The three-dimensional elastic stress state in a general composite laminate under twisting load is given. The analysis is carried out through an integral equation formulation that is numerically solved by the boundary element method. The integral representation of the elastic behavior is deduced by means of the reciprocity theorem applied to the actual response of each ply and the problem's analytical singular fundamental solutions. The interface continuity conditions due to perfect bonding are considered to complete the laminate mathematical model. The method permits the analysis for generally stacked laminates having general shape of the cross section. By virtue of the formulation characte…
INVESTIGATIONS OF STRAIN AND STRESS STATE AND CAPACITY IN SHORT CYLINDRICAL SHELLS UNDER INTERNAL PRESSURE
1989
In the paper it has been assumed that a triaxial stress and strain state occurs in a shell. The finite element method was used and owing to that digitization of the problem was possible. Such digitization was necessary for a numerical analysis of the moment stress state in the shell. On the ground of physical relations of the Prandtl-Reuss plastic flow theory an algorithm was formulated. The algorithm was a basis of calculating strains and stresses and determining capacity in a short cylindrical shell with rigid bottoms. The shell was subject to internal pressure. Experiments were carried out, as well. The results obtained with: equations of the membraneous shell theory, using plastic flow …
Finite element analysis in vertebrate palaeontology
2002
The Finite Element Analysis (FEA) is a numerical method which allows to analyse the static and dynamic behaviour of complex structures. A structure is substituted by a model consisting of a number of small, well-defined elements, each interconnected by nodes. Within the element attributes and material properties, the model can be exposed to static or dynamic loads. The displacements of the structure as the reaction to its loadings are calculated. Other data such as stress or strain at localized points in the structure are derived from these displacements. Originally developed for engineering, FEA soon was introduced to human medicine by modelling the behaviour of bone, teeth, cartilage and …
Recent advances in local probe techniques in corrosion research – Analysis of the role of stress on pitting sensitivity
2007
Local probe techniques have been largely applied to predict the spatial distribution of the electrochemical reactions and to quantify the corrosion rate. These local probe techniques are now being developed to capture the temporal information, in-situ and in real-time. Nevertheless only few works have been devoted to investigate with these local probes the role of stress on pitting sensitivity on passive materials. In this paper, a part of the most recent studies based on combination of local electrochemical measurements with finite element mapping of surface stress gradients are reported illustrating the role of inclusions under straining and the mechanical effect of surface preparation on…
Stress fields in general composite laminates
1996
A direct approach is employed to obtain a general boundary integral formulation for the analysis of composite laminates subjected to uniform axial strain. The integral equations governing the problem are directly deduced from the reciprocity theorem, employing the generalized orthotropic elasticity fundamental solutions expressly inferred. The solution is achieved by the boundary element method, which gives, once the traction-free boundary conditions and the interfacial continuity conditions are enforced, a linear system of algebraic equations. The formulation does not present restrictions with regard to the laminate stacking sequence and it does not require any aprioristic assumption. The …
FEM analysis of push-out test response of Hybrid Steel Trussed Concrete Beams (HSTCBs)
2015
Abstract Aiming to investigate the steel truss–concrete stress transfer mechanism in Hybrid Steel Trussed–Concrete Beams (HSTCBs), a three-dimensional (3D) nonlinear Finite Element (FE) model is developed. The constitutive relationship of the steel composing the plates and the rebars is modeled by means of a quadri-linear law, while the concrete behavior is defined by means of a Concrete Damaged Plasticity (CDP) model, suitable for modeling concrete and brittle materials. Two main failure mechanisms are considered, namely the tensile cracking and the compressive crushing. In order to accurately grasp the complicate dowel and bond phenomena arising at the steel–concrete interface, a 3D solid…
Artificial neural network comparison for a SHM procedure applied to composite structures.
2013
In this paper different architectures of Artificial Neural Networks (ANNs) for structural damage detection are studied. The main objective is to create an ANN able to detect and localize damage without any prior knowledge on its characteristics so as to serve as a realtime data processor for SHM systems. Two different architectures are studied: the standard feed-forward Multi Layer Perceptron (MLP) and the Radial Basis Function (RBF) ANNs. The training data are given, in terms of a Damage Index ℑD, properly defined using the piezoelectric sensor signal output to obtain suitable information on the damage position and dimensions. The electromechanical response of the assembled structure has b…
Structures with Surface-Bonded PZT Piezoelectric Patches: a BEM Investigation into the Strain-transfer Mechanism for SHM applications
2009
In this work a three-dimensional BEM model is used for the analysis of structures with cracks and surface bonded piezoelectric PZT patches used as strain sensors. The cracked structure is modelled by the dual boundary element method, which allows for accurate and reliable crack analysis, while the piezoelectric patch is analyzed by a finite element state-space approach, that embodies both the full electro-mechanical coupling and the suitable sensor’s boundary conditions. The model is used to investigate the strain-transfer mechanism from an host elastic structure to the piezoelectric layer, taking into account the effect of the adhesive layer, as well as the mechanical interaction between t…