Search results for "T method"
showing 10 items of 1254 documents
Structural Health Monitoring of delaminated composite structures by the Boundary Element method
2012
Structural Health Monitoring (SHM) for composite materials is becoming a primary task due to their extended use in safety critical applications. Different methods, based on the use of piezoelectric transducers, strain memory alloys as well as of fibre optics, has been successfully proposed to detect and monitor damage in composite structural components with particular attention focused on delamination cracks. In the present paper a Structural Health Monitoring model based on the use of piezoelectric sensors, already proposed by the authors for isotropic damaged components, is extended to delaminated composite structures. The dynamic behavior of the host damaged structure and the bonded piez…
A HYBRID VEM/BEM NUMERICAL TECHNIQUE FOR SIMULATING DAMAGE IN COMPOSITE MATERIALS
2021
Composite materials are nowadays widely used in the aerospace sector both for primary and secondary structures for their high mechanical properties and the ability to model them according to project needs. Therefore, accurately predicting material behaviour when subjected to operating loads is extremely important in making the design process more efficient. For this purpose, computational approaches based on continuum damage mechanics have been largely used to study the progressive loss of material integrity due to the propagation and coalescence of microscopic defects. In this contribution, a recently developed hybrid computational technique, which combines the Virtual Element Method (VEM)…
Coupling BEM and VEM for the Analysis of Composite Materials with Damage
2021
Numerical tools which are able to predict and explain the initiation and propagation of damage at the microscopic level in heterogeneous materials are of high interest for the analysis and design of modern materials. In this contribution, we report the application of a recently developed numerical scheme based on the coupling between the Virtual Element Method (VEM) and the Boundary Element Method (BEM) within the framework of continuum damage mechanics (CDM) to analyze the progressive loss of material integrity in heterogeneous materials with complex microstructures. VEM is a novel numerical technique that, allowing the use of general polygonal mesh elements, assures conspicuous simplific…
Application of dual boundary element method in active sensing
2013
In this paper, a boundary element method (BEM) for the dynamic analysis of 3D solid structures with bonded piezoelectric transducers is presented. The host structure is modelled with BEM and the piezoelectric transducers are formulated using a 3D semi-analytical finite element approach. The elastodynamic analysis of the entire structure is carried out in Laplace domain and the response in time domain is obtained by inverse Laplace transform. The BEM is validated against established finite element method (FEM).
Special Splines of Exponential Type for the Solutions of Mass Transfer Problems in Multilayer Domains
2016
We consider averaging methods for solving the 3-D boundary-value problem of second order in multilayer domain. The special hyperbolic and exponential type splines, with middle integral values of piece-wise smooth function interpolation are considered. With the help of these splines the problems of mathematical physics in 3-D with piece-wise coefficients are reduced with respect to one coordinate to 2-D problems. This procedure also allows to reduce the 2-D problems to 1-D problems and the solution of the approximated problemsa can be obtained analytically. In the case of constant piece-wise coefficients we obtain the exact discrete approximation of a steady-state 1-D boundary-value problem.…
An investigation of thermal behaviour of brake disk pad assembly with Ansys
2021
Abstract The brake disk is a key part of the braking mechanism, the task of it is to slow or stop the vehicle's wheels, on the one side, while the heat produced during the process is dissipated. In this regard, the brake pads are pressed by mechanical strength on the surface of the brake disks. This study aims to develop a model of a disk brake by use of CATIA V5, on the model, finite element analysis (FEA) done by ANSYS 19 then compare it to the findings gained by the original tests. A computational thermo-mechanical study was conducted on this research by use of ANSYS software for disk brake mounting inside a hydraulic brake system. This study is designed to provide insight into the heat …
Use of fiber-section beam elements for modelling the monotonic flexural response of RC jacketed columns
2021
Abstract The use of reinforced concrete (RC) jacketing is a common technique for retrofitting existing RC columns with poor structural performances. Literature studies highlighted that the relative slip occurring at the interface between the new and the old concrete can affect substantially the flexibility and the strength of the retrofitted member. For this reason, several interface treatments are usually applied, aiming to induce a monolithic behaviour to the column. However, despite the commonness of RC jacketing, a limited number of studies investigated numerical modelling strategies for including these phenomena, especially with reference to the development of numerical models for desi…
Tensile behaviour of anti-symmetric CFRP composite
2011
Abstract This paper addresses the response of a 17-ply anti-symmetric carbon/epoxy composite subjected to uniaxial tensile loading. Hashin ply damage model is adopted to describe the damage behaviour of the plies, whereas damage initiation and progression of the interfaces are characterised by mixed-mode cohesive damage model. Force-displacement curves obtained numerically and experimentally show good agreement. Results show that all laminae and interfaces experience the damage except laminae with 0o fibre. In addition, damage is concentrated at the tab and central regions of the tensile specimen. Edge delamination is observed in all interfaces.
Stress Transfer within CNT Fibres: A FEA Approach
2015
Abstract Carbon nanotube (CNT) fibres are characterized by extreme anisotropy in their structure and physical properties. These fibres have been shown to have high axial strength, but poor shear strength between carbon nanotubes; for this reason it is difficult to transfer stress uniformly acrossthe fibre cross section. Here, Finite Element Analysis (FEA) is used to predict the stress distribution and the stress-strain curves of CNT fibres. The resultsdemonstrate that, in accordance with St. Venant principle,very considerable length-to-diameter ratios (> 10 3 ) are required to obtain a uniform stress distribution within the fibres even in the presence of low applied strain.
Multivariate quality control studies applied to Ca(II) and Mg(II) determination by a portable method
1998
Made available in DSpace on 2022-04-28T19:53:14Z (GMT). No. of bitstreams: 0 Previous issue date: 1998-01-01 A portable or field test method for simultaneous spectrophotometric determination of calcium and magnesium in water using multivariate partial least squares (PLS) calibration methods is proposed. The method is based on the reaction between the analytes and methylthymol blue at pH 11. The spectral information was used as the X-block and the Ca(II) and Mg(II) concentrations obtained by a reference technique (ICP-AES) were used as the Y-block. Two series of analyses were performed, with a month's difference between them. The first series was used as the calibration set and the second on…