Search results for "T method"
showing 10 items of 1254 documents
Structural Health Monitoring Procedure for Composite Structures through the use of Artificial Neural Networks
2015
In this paper different architectures of Artificial Neural Networks (ANNs) for structural damage detection are studied. The main objective is to investigate an ANN able to detect and localize damage without any prior knowledge on its characteristics so as to serve as a real-time data processor for Structural Health Monitoring (SHM) systems. Two different architectures are studied: the standard feed-forward Multi Layer Perceptron (MLP) and the Radial Basis Function (RBF) ANNs. The training data are given, in terms of a Damage Index ℑD, properly defined using a piezoelectric sensor signal output to obtain suitable information on the damage position and dimensions. The electromechanical respon…
ALE Simulation of Orthogonal Cutting: a New Approach to Model Heat Transfer Phenomena at the Tool-Chip Interface
2007
This paper presents a new procedure to evaluate the global heat transfer coefficient in orthogonal cutting. The knowledge of the actual heat transfer conditions is a fundamental issue as far as the life, tool wear and tool substitution interval are regarded. More in detail, an Arbitrary Lagrangian-Eulerian approach was utilised to model orthogonal cutting process and the numerical simulations were validated by making experimental tests for identifying cutting forces and internal tool temperatures. A mild steel was cut utilising both an uncoated (WC) and a coated (TiN) tool. On the basis of both experimental and simulative data, a consistent model of the global heat transfer coefficient as f…
Load Response and Finite Element Modelling of Bonded Loading Hoses
2014
Steel reinforced bonded vulcanized rubber loading hoses are frequently used in offshore oil loading systems. The hoses are used as offloading system between platforms and shuttle tankers and represent a flexible economical feasible solution for hydrocarbon transfer. The reliability of these hoses throughout the service life is an important issue both with respect to operational availability and with respect to environmental safety. Hence, the load bearing capacity of these hoses and the fatigue endurance become matters of concern and important design topics. Due to the large deformation of these hoses and the complicated composite structure in the hose wall, the hoses are difficult to analy…
Springback evaluation in fully 3-D sheet metal forming processes
1997
Abstract In the modern manufacturing industries the knowledge and proper control of the sheet metal springback after forming is a fundamental aspect in the achievement of near net shape stamped parts. In this paper an effective springback prediction in some fully three-dimensional stamping processes is carried out. Such a prediction is based on a combined approach in which an explicit finite element code has been employed to simulate the forming phase while a traditional implicit procedure has been used to analyse the springback phase. The results obtained have been compared with a set of experimental tests and an excellent correlation between the predicted and experimental data has been fo…
A practical approach for the strength evaluation of RC columns reinforced with RC jackets
2015
Abstract Reinforced concrete (RC) jacketing is nowadays one of the most common techniques adopted for seismic retrofitting of existing RC columns. It is used to increase load-carrying capacity and ductility of weak existing members by means of a simple and cheap method. The structural efficiency is related to two main effects: – the enlargement of the transverse cross section; – the confinement action provided by the external jacket to the inner core. Several theoretical and experimental studies were addressed in the past to investigate on how it is possible to calculate the strength enhancement due to these effects and to highlight the main key parameters influencing the structural behavio…
Numerical Analysis of Piezoelectric Active Repair in the Presence of Frictional Contact Conditions
2013
The increasing development of smart materials, such as piezoelectric and shape memory alloys, has opened new opportunities for improving repair techniques. Particularly, active repairs, based on the converse piezoelectric effect, can increase the life of a structure by reducing the crack opening. A deep characterization of the electromechanical behavior of delaminated composite structures, actively repaired by piezoelectric patches, can be achieved by considering the adhesive layer between the host structure and the repair and by taking into account the frictional contact between the crack surfaces. In this paper, Boundary Element (BE) analyses performed on delaminated composite structures …
Multi-objective optimization of nitinol stent design.
2017
Nitinol stents continuously experience loadings due to pulsatile pressure, thus a given stent design should possess an adequate fatigue strength and, at the same time, it should guarantee a sufficient vessel scaffolding. The present study proposes an optimization framework aiming at increasing the fatigue life reducing the maximum strut strain along the structure through a local modification of the strut profile.The adopted computational framework relies on nonlinear structural finite element analysis combined with a Multi Objective Genetic Algorithm, based on Kriging response surfaces. In particular, such an approach is used to investigate the design optimization of planar stent cell.The r…
On the effectiveness of numerical simulation in the prediction of profile distortion in extrusion
2005
Among the so-called ‘traditional processes’, extrusion represents one of the most diffused and utilized, since it permits the production of many industrial parts and raw materials. Of course, relevant knowledge on process mechanics and practice is nowadays available in the technical literature and in properly constructed handbooks. On the other hand, the introduction of finite element simulation, as a powerful analysis and design tool, opened new perspectives. Nowadays many researchers are involved in research tasks aimed at explaining some peculiar extrusion aspects. In this paper the effectiveness of numerical simulation for a complex three-dimensional extrusion process analysis is inves…
3D finite element analysis of tool wear in machining
2008
Abstract The paper is focused on the 3D numerical prediction of tool wear in metal cutting operations. In particular, an analytical model, able to take into account the diffusive wear mechanism, was implemented through a specific subroutine. Furthermore, an advanced approach to model heat transfer phenomena at the tool–chip interface was included in the numerical simulation. The adopted simulation strategy gave the possibility to properly evaluate the tool wear. The 3D FEM results were compared with some experimental data obtained turning AISI 1045 steel using uncoated WC tool; a good agreement was found out.
Central Bursting Defects in Drawing and Extrusion: Numerical and Ultrasonic Evaluation
1993
Abstract A new approach for the prediction of central bursting defects in extrusion and drawing is proposed: a finite element analysis of the processes has been carried out, and the obtained results have been elaborated by means of a post-processor, which, employing a proper ductile fracture criterion, is able to suggest if and where the central burst occur. An ultrasonic control system able to detect the insurgence of defects with a resolution of 0.2 mm. has been setup in order to verify the predictive capability of the model. The experimental results show a good agreement with the numerical predictions confirming the effectiveness of the proposed approach, whose industrial application app…