Search results for "T method"
showing 10 items of 1254 documents
Joining Ti6Al4V and AISI 304 through friction stir welding of lap joints: experimental and numerical analysis
2014
The results of an experimental and numerical analysis on Friction Stir Welding of dissimilar lap joints made out of AISI304 and Ti-6Al-4 V thin sheets are presented. The mixed joints, welded with varying process parameters, have been characterized from a mechanical and metallurgical point of view. A numerical model able to take into account the behaviour of the two different materials has been used. The numerical results have been utilized to explain the joint properties and the occurring material flow. The effect of the heat input, tilt angle and sheets mutual position has been investigated. It is found that both hooking defects and tunnels may occur with incorrect choice of process parame…
Cohesive–frictional interface constitutive model
2009
AbstractIn the framework of numerical analysis of joined bodies, the present paper is devoted to the constitutive modeling, via an interface kinematic formulation, of mechanical behaviour of internal adhesive layers. The proposed interface constitutive model couples a cohesive behaviour, based on the damage mechanics theory, with a frictional one, defined in a non-associative plasticity framework. Namely, the interface formulation follows the transition of the adhesive material from the sound elastic condition to the fully cracked one. This formulation is able to model, by means of a specific interpretation of the damage variable and in a relevant mathematical setting, the interface interme…
A three-dimensional grain boundary formulation for microstructural modeling of polycrystalline materials
2013
Abstract A three-dimensional grain boundary formulation is presented for the analysis of polycrystalline microstructures. The formulation is based on a boundary integral representation of the elastic problem for the single grains of the polycrystalline aggregate and it is expressed in terms of the intergranular fields, namely displacements and tractions, that play an important role in polycrystalline micromechanics. The artificial polycrystalline morphology is represented using the Hardcore Voronoi tessellation, which is simple to generate and able to embody the main statistical features of polycrystalline microstructures. The details of the microstructure generation and meshing, which invo…
Constitutive Numerical Model of FRCM Strips Under Traction
2020
In this paper, the tensile behavior of Fiber Reinforced Cementitious Matrix (FRCM) strips is investigated through Finite Element (FE) models. The most adopted numerical modeling approaches for the simulation of the fiber-matrix interface law are described. Among them, the cohesive model is then used for the generation of FE models which are able to simulate the response under traction of FRCM strips tested in laboratory whose results are available in the technical literature. Tests on basalt, PBO and carbon coated FRCM specimens are taken into account also considering different mechanical ratios of the textile reinforcement. The comparison between FE results and experimental data allows val…
A grain-scale model for high-cycle fatigue degradation in polycrystalline materials
2018
Abstract A grain-scale three-dimensional model for the analysis of fatigue intergranular degradation in polycrystalline materials is presented. The material microstructure is explicitly represented through Voronoi tessellations, of either convex or non-convex domains, and the mechanics of individual grains is modelled using a boundary integral formulation. The intergranular interfaces degrade under the action of cyclic loads and their behaviour is represented employing a cohesive zone model embodying a local irreversible damage parameter that evolves according to high-cycle continuum damage laws. The model is based on the use of a damage decomposition into static and cyclic contributions, a…
A numerical and experimental study through laser thermography for defect detection on metal additive manufactured parts
2017
Additive manufacturing has been recently employed in industrial sectors with the fundamental requirement for zero defect parts. Technological developments in additive manufacturing notwithstanding, there continues to be a scarcity of non-destructive inspection techniques to be exploited during the manufacturing process itself, thus limiting industrial advancements and extensive applications. Therefore, being able to integrate the defect inspection phase within the additive manufacturing process would open the way to enabling corrective actions on the component in itinere, that is, before reaching the final product. For this reason, new methods of in-process monitoring are gaining more and m…
Monolithic integration of Giant Magnetoresistance (GMR) devices onto standard processed CMOS dies
2014
Giant Magnetoresistance (GMR) based technology is nowadays the preferred option for low magnetic fields sensing in disciplines such as biotechnology or microelectronics. Their compatibility with standard CMOS processes is currently investigated as a key point for the development of novel applications, requiring compact electronic readout. In this paper, such compatibility has been experimentally studied with two particular non-dedicated CMOS standards: 0.35 μm from AMS (Austria MicroSystems) and 2.5 μm from CNM (Centre Nacional de Microelectrònica, Barcelona) as representative examples. GMR test devices have been designed and fabricated onto processed chips from both technologies. In order …
Modelling intergranular and transgranular micro-cracking in polycrystalline materials
2018
Abstract In this work, a grain boundary formulation for intergranular and transgranular micro-cracking in three-dimensional polycrystalline aggregates is presented. The formulation is based on the displacement and stress boundary integral equations of solid mechanics and it has the advantage of expressing the polycrystalline problem in terms of grain boundary variables only. The individual grains within the polycrystalline morphology are modelled as generally anisotropic linear elastic domains with random spatial orientation. Transgranular micro-cracking is assumed to occur along specific cleavage planes, whose orientation in space within the grains depend upon the crystallographic lattice.…
Structural factor in bending testing of fivefold twinned nanowires revealed by finite element analysis
2016
In this study, we performed finite element method simulations to investigate the effect of the structure on the elastic response of Ag and Au nanowires (NWs) with a fivefold twinned crystal structure in bending tests. Two different models of a pentagonal NW were created: a 'uniform model' having an isotropic continuous structure and a 'segmented model' consisting of five anisotropic domains. Two asymmetrical mechanical test configurations were simulated: cantilevered beam bending and 3-point bending. The dimensions of the NW, the test configurations, as well as the force and the displacement ranges were based on the previously obtained experimental data. The results of the simulations demon…
Viscoelastic material models for more accurate polyethylene wear estimation
2018
Wear debris from ultra-high-molecular-weight polyethylene components used for joint replacement prostheses can cause significant clinical complications, and it is essential to be able to predict implant wear accurately in vitro to prevent unsafe implant designs continuing to clinical trials. The established method to predict wear is simulator testing, but the significant equipment costs, experimental time and equipment availability can be prohibitive. It is possible to predict implant wear using finite element methods, though those reported in the literature simplify the material behaviour of polyethylene and typically use linear or elastoplastic material models. Such models cannot represe…