Search results for "T1-995"
showing 10 items of 51 documents
Effect of Nanodiamonds on Structure and Durability of Polyethylene Oxide-Based Nanocomposites
2016
Polymer-based nanocomposites containing nanodiamonds (NDs) are attractive multifunctional materials with a growing range of applications. In this work, in the frame of developing completely biocompatible systems, nanocomposites based on polyethylene oxide (PEO) and different amount of NDs have been formulated through melt mixing and fully characterized. In particular, the reinforcement effect of NDs in PEO has been probed through tensile tests, and the rheological response of PEO-based nanocomposites as a function of the nanoparticles amount has been investigated and discussed. The obtained results show that the presence of well-distributed NDs strengthens the mechanical performance of the …
Relative Humidity Dependent Resistance Switching of Bi2S3Nanowires
2017
Electrical properties of Bi2S3nanowires grown using a single source precursor in anodic aluminum oxide templates are sensitive to the relative humidity in an inert gas environment. Dynamic sensing dependency is obtained and shows presence of spontaneous resistance switching effect between low and high relative humidity states. Employing the thermionic field emission theory, heights of Schottky barriers are estimated from the current-voltage characteristics and in relation to the humidity response. The change of Schottky barrier height is explained by local changes in physically adsorbed water molecules on the surface of the nanowire.
Preparation and Characterization of Inulin Coated Gold Nanoparticles for Selective Delivery of Doxorubicin to Breast Cancer Cells
2016
A novel folate-targeted gold-based nanosystem for achieving selectivity towards folate receptor FR positive cells is proposed, by virtue of the fact that the FR is a molecularly targeted entity overexpressed in a wide spectrum of solid tumors. A new inulin-folate derivative INU-FA has been synthesized to act as coating agent for 40 nm gold nanoparticles. The obtained polymer-coated gold nanoparticles [email protected] were characterized in terms of hydrodynamic radius, shape, zeta potential, and aqueous stability and were loaded with doxorubicin [email protected]/Doxo. Its release capability was tested in different release media. The selectivity of [email protected]/Doxo system towards FRs-…
Temperature Sensor Based on Ge-Doped Microstructured Fibers
2009
The fundamental mode cutoff properties of Ge-doped microstructured fibers, filled with a liquid, permit the implementation of wavelength- and amplitude-encoded temperature sensors with an ultra-high sensitivity. The cutoff wavelength changes with temperature, and the thermo-optic coefficient of the liquid determines the sensitivity of the sensor. Sensitivity as high as 25 nm/∘Cis reported. In addition, simple amplitude interrogation techniques can be implemented using the same sensor heads.
Modeling of Magnetic-Field-Assisted Fluidization: Model Development and CFD Simulation of Magnetically Stabilized Fluidized Beds
2014
Magnetic-field-assisted fluidization is starting to be considered as a viable alternative to standard fluidized beds for those operations (such as particle separations, filtration, adsorption) in which the solid phase can be made of magnetic particles or, alternatively, the fluidizing agent is a ferro-fluid; thus the fluid bed responds to the action of magnetic fields, and stabilized fluidization regimes can be generated. One of the major difficulties to be tackled is the development of a predictive model capable of estimating the stabilized-to-bubbling transition velocity for a given magnetic field or, on the other hand, the magnetic field intensity required to stabilize the bed to a quies…
Comparison between a Uniaxial Compaction Tester and a Shear Tester for the Characterization of Powder Flowability
2014
The complete characterization of powder flow properties with shear cells is a long and time-consuming process that requires specially trained operators or costly automated instruments. For these reasons, in industrial practice, the use of simpler and less extensive measurement by uniaxial compaction testers is often preferred. However, previous studies in the literature indicate that the results of the two techniques are not directly comparable due to the different stress state conditions achieved in the two testers.In this study, an experimental campaign to measure the flow function of five different powders with a ring shear tester (RST) and a uniaxial compaction tester (UCT) was performe…
Aggregative behavior of cohesive magnesium carbonate powders during fluidization and aerated discharge
2014
In this paper we studied the aerated discharge of two magnesium carbonate powders differing in their average diameter and particle size distribution. These samples were characterized by means of fluidization experiments and rheology shear tests carried out in a rotating shear cell. In the hopper discharge experiments, besides the discharge rates and the mass of residual solids as a function of the aeration rate, the aggregative behavior was observed by means of photographic techniques. Solids aggregates were actually visible within the aerated beds of solids during the fluidization experiments and in the streams of the discharging solids. Experimental data on the powder flow properties and …
The Impact of CdS Nanoparticles on Ploidy and DNA Damage of Rucola (Eruca sativa Mill.) Plants
2015
The genotoxic effect of cadmium sulfide nanoparticles (CdS NPs) of different sizes in rucola (Eruca sativaMill.) plants was assessed. It was confirmed that nanoparticles < 5 nm in size were more toxic than larger particles at an identical mass concentration. Significant differences in cell ploidy, as well as in the mitotic index, were detected between control and treated samples. Differences in the DNA banding pattern between control samples and samples after treatment with cadmium sulfide nanoparticles were significant and detected at different places as the appearance or elimination of DNA fragments. Fluorescence images showed that cadmium sulfide nanoparticles smaller than 5 nm in siz…
Low-density polyethylene/polyamide/clay blend nanocomposites: Effect of morphology of clay on their photooxidation resistance
2017
The photooxidation behaviour of low-density polyethylene (LDPE)/polyamide (PA) blends, containing polyamide 11 (PA11) or polyamide 6 (PA6), has been investigated in the absence and presence of a small amount of commercial organomodified clay (OMMT). The polymer blends LDPE/PA11 and LDPE/PA6 at 75/25 wt./wt.%, with and without OMMT, have been prepared by a two-step procedure: extrusion and sheet formulation. The formulated complex systems have been subjected to accurate morphological analysis in order to evaluate the effect of the OMMT presence on the refinement of the blend morphology. Furthermore, the produced sheets have been subjected to arterial UVB exposure and the variations of the me…
Analysis of the road traffic management system in the neural network development perspective
2019
The research goal of the paper is to present the issues connected with road traffic management systems and to illustrate a management system that uses Intelligent Transportation Systems and neural networks. The use of Intelligent Transportation Systems (ITS) is a method of improving the conditions of communications, making it independent from the development of communications infrastructure. The attributes of neural networks are focused on solving the problems of optimisation, which involve the development of optimal strategies for traffic management. The proposed road traffic management system that uses ITS and neural networks can be applied in prediction of the conditions of communication…