Search results for "TEP"
showing 10 items of 712 documents
Functionalization of Silver Nanowires Surface using Ag–C Bonds in a Sequential Reductive Method
2015
Silver nanowires (Ag-NW) assembled in interdigitated webs have shown an applicative potential as transparent and conducting electrodes. However, upon integration in practical device designs, the presence of silver oxide, which instantaneously forms on the Ag-NW surfaces in ambient conditions, is unwanted. Here, we report on the functionalization of Ag-NWs with 4-nitrophenyl moieties through A-C bonds using a versatile two step reduction process, i.e., ascorbate reduction combined electrografting. We show that 40% of the Ag atop sites were terminated and provide high surface stability toward oxidation for more than 2 months while keeping the same intrinsic conductivity as in bulk silver.
One-Step Synthesis and Consolidation of Nanophase Iron Aluminide
2001
The simultaneous synthesis and densification of nanophase iron aluminide is investigated. Elemental nanophase reactants produced by mechanical activation were reacted by field activation with the simultaneous application of uniaxial pressure. The process was demonstrated in this work by the synthesis of dense nanometric FeAl. Iron and aluminum powders were co-milled in a specially designed planetary mill to obtain nanometric reactants and to avoid formation of any product phases. These powders were then subjected to high AC currents (1250–1500 A) and pressures in the range of 70–106 MPa. Under these conditions, a reaction was initiated and completed within a short period of time (2.5–3.5 mi…
Characteristics of LiFePO4 obtained through a one step continuous hydrothermal synthesis process working in supercritical water
2009
International audience; The olivine-like material LiFePO4 was prepared via a continuous hydrothermal synthesis process working from subcritical to supercritical water conditions. The influence of some processing parameters–temperature and reaction time–was investigated in terms of material purity, grain size and morphology. Supercritical conditions were found to be attractive to synthesize in one step a well-crystallized material without impurities. The primary particles size was in the nanometric range. They showed a natural tendency to form micron size agglomerates, which were supposed to be the cause of the limited capacity, as demonstrated through a cross study using laser particle size…
Experimental analysis of distributed pump absorption and refractive index changes in Yb-doped fibers using acousto-optic interaction.
2015
In-fiber acousto-optic interaction is used to characterize the refractive index changes at the C band in a single-mode ytterbium-doped optical fiber under 980 nm pumping. The transmission notch created by the acoustic-induced coupling between the core mode and a cladding mode shifts to longer wavelengths when the pump is delivered to the fiber. The electronic contribution to the refractive index change is quantified from the wavelength shift. Using a time-resolved acousto-optic method, we investigate the distribution of pump absorption, and the resulting refractive index change profile, along sections of ytterbium-doped fiber exceeding 1 m long under different pump power levels.
Parametrical study of multilayer structures for CIGS solar cells
2014
In this paper, a numerical analysis of relevant electrical parameters of multilayer structures for CIGS-based solar cells was carried out, employing the simulation software wxAMPS. In particular, we have focused on thin film cells having a ZnO:Al/ZnO/CdS/CIGS structure with a Molybdenum back contact. The aim of this work is to establish good theoretical reference values for an ongoing experimental activity, where our technology of choice is the single-step electrodeposition. In detail, we have analyzed how the main electrical properties change with the bang gap and the thickness of the absorber layer, for such a type of solar cell structure. Our results show that both efficiency and fill fa…
Recycling of heterogeneous plastics wastes: I—Blends with low-density polyethylene
1992
Abstract Heterogeneous plastics wastes are usually recycled by means of ad hoc designed equipment which, in a single step, produces objects with large dimensions and poor mechanical properties. In this preliminary work, the possibility of preparing blends of plastics waste and low-density polyethylene is investigated. These ‘secondary’ materials (with plastics waste content up to 50%) show mechanical properties similar, except for the elongation at break, to those of the virgin polyethylene. The addition of moderate amounts of calcium carbonate does not significantly reduce the properties of these materials.
Kinetic studies of two-step polymerization of propylene over a titanium-aluminum catalyst
1997
The influence was studied of the modification of an unsupported titanium-aluminum catalytic system with an internal Lewis base incorporated, via prepolymerization, on the activity of this system in propylene polymerization. In order to clarify the reasons for the activating effect of prepolymerization, comparative studies were carried out on the kinetics of polymerization catalyzed by a titanium system and its prepolymerized counter part. Based on the kinetic model suggested for the polymerization mechanism, the concentration of active sites and rate constants were determined for chain propagation, chain transfer and termination reactions. The following conclusions were deduced: (i) the ini…
Surface termination effects on the oxygen reduction reaction rate at fuel cell cathodes
2018
This research was partly funded by the Latvian project IMIS2 with the computer resources provided by the High Performance Computing Centre Stuttgart (HLRS) (Project DEFTD 12939). The authors thank D. Gryaznov for fruitful discussions and M. Sokolov for technical assistance. MMK is grateful to the Office of the Director of National Science Foundation for support under the Independent Research and Development program. The ndings, conclusions, and recommendations expressed in this material are those of the authors and do not necessarily reect the views of NSF and other funding agencies.
One step continuous hydrothermal synthesis of very fine stabilized superparamagnetic nanoparticles of magnetite
2011
International audience; Stable suspensions of citrated SPIO nanoparticles were synthesised in one step using a hydrothermal continuous process. Citrates control the crystallite size and the oxidation degree of metallic ions despite the very short reaction time (4 s). Magnetite particles, Fe2.94O4, with an average size of 4 nm and good monodispersity were obtained.
1/f noise in streaming electrification
2005
The paper presents the measurement results of the noise generated by static electricity. The tests were performed in the spinning-disk system. Insulation liquid (transformer oil) was used for electrostatic charge generation. The element measured was the current flowing to the disk surface. A stochastic term is present in the current. Existance of this term is due to the complex chemical constitution of the oil. A relaxation of the polar molecules has inertial character. The spreading of a large amount of the relaxation phenomena can lead to forming a compounded spectrum close in shape to 1/f noise. Power spectral density of the polarization was defined for periodic step function. The calcul…