Search results for "TRICKLE"

Hydrodynamics of a three-phase fixed-bed reactor operating in the pulsing flow regime at an elevated pressure

2002

Abstract Results are presented for a three-phase reactor operating at an elevated pressure in the pulsing flow regime. For the system air–water and pressures of 0.1– 0.9 MPa lines are determined that define the change of the hydrodynamic model from the gas continuous flow regime (GCF) to the pulsing flow regime (PF). Also, parameters are found that characterize the pulsing flow of fluids, namely the velocity of pulses travelling along the bed, the frequency of pulsations and their structure, i.e., the length of the pulses and that of the liquid-rich zone.

Analytical Approach Determining the Optimal Length of Paired Drip Laterals in Uniformly Sloped Fields

2015

Microirrigation plants, if properly designed, allow for water use efficiency to be optimized and high values of emission uniformity to be obtained in the field. Disposing paired laterals, for which two distribution pipes extend in opposite directions from a common manifold, can contribute to reducing the initial investment cost that represents a limiting factor for small-scale farmers of developing countries where in the last decade, the diffusion of such irrigation systems has been increasing. The objective of this paper is to propose an analytical approach to evaluate the maximum lengths of paired drip laterals for any uniform ground slope, respecting the criteria to maintain emitter flow…

Near Real-Time Data Warehousing with Multi-stage Trickle and Flip

2011

A data warehouse typically is a collection of historical data designed for decision support, so it is updated from the sources periodically, mostly on a daily basis. Today’s business however asks for fresher data. Real-time warehousing is one of the trends to accomplish this, but there are a number of challenges to move towards true real-time. This paper proposes ‘Multi-stage Trickle & flip’ methodology for data warehouse refreshment. It is based on the ‘Trickle & flip’ principle and extended in order to further insulate loading and querying activities, thus enabling both of them to be more efficient.

Modelling wet-air oxidation of phenol in a trickle-bed reactor using active carbon as a catalyst

2016

Air purification from a mixture VOCs in the pilot-scale trickle-bed bioreactor (TBB)

2017

The efficiency of the air bio-purification from the mixture of two volatile organic compounds (styrene and p-xylene) was studied. The process was carried out in a pilot-scale trickle-bed bioreactor installation designed to purify ∼200 m 3 h -1 of the polluted air. The bioreactor operated at concurrent flow of gas and liquid (mineral salt solution) through packing (polypropylene Ralu rings) covered with a thin layer of microorganisms (bacterial consortium of Pseudomonas sp. E-022150 and Pseudomonas putida mt-2). The experiments, carried out for various values of a reactor load with pollutant, confirmed the great efficiency of the investigated process. At the tested bed load with pollution (i…

Influence of the porosity profile and sets of Ergun constants on the main hydrodynamic parameters in the trickle-bed reactors

2014

Abstract The Eulerian multiphase code has been applied for the comparative simulation of the experimental results obtained for varying flow rates of both fluid phases and for systems of various physicochemical properties used in the laboratory trickle-bed reactor (TBR). Therefore six different radial porosity profiles and three sets of the Ergun constants used in the relations defining the interphase momentum exchange have been implemented into the CFD code. The mean relative error of the pressure drop and of the averaged holdup as well as the standard deviation determined with respect to the experiments have been used as the criterion for the validation of the theoretical model. These valu…

Modelling of the hydrodynamics of concurrent gas and liquid flow through packed bed

2016

The aim of the present study is to simulate concurrent gas and liquid flow through packed bed in the gas continuous flow regime (GCF) and continuity shock waves regime (CSW) using computational fluid dynamics (CFD). The application of multiple gas-liquid-solid model requires the knowledge of relationships determining interactions between phases. The exchange coefficients of these forces were defined by means of equations suggested by ATTOU et al. (1999). As a result of the computational simulation the following data were obtained: gas pressure drop in the bed, volume fraction distribution of a given phase (liquid and gas holdups) along the packing and its mean value in the reactor. The comp…

Inductive Power Transfer for 100W battery charging

2013

Today, Inductive Power Transfer (IPT) is widely investigated to provide wireless battery charge. Potential applications range from a few Watts of handheld devices to kWatts of automotive applications. Despite of comfort and safety options, wireless charging features relatively poor power conversion efficiency. In the literature, several solutions are proposed addressing efficiency related issues. In this paper, a 100W wireless charging station for electric bikes which improves the power conversion efficiency is proposed. The magnetic structure design is analyzed thoroughly as well as the proposed power electronics system architectures of both the power transmitter and power receiver. The ef…

Parametric sensitivity of a CFD model concerning the hydrodynamics of trickle-bed reactor (TBR)

2016

Abstract The aim of the present study was to investigate the sensitivity of a multiphase Eulerian CFD model with respect to relations defining drag forces between phases. The mean relative error as well as standard deviation of experimental and computed values of pressure gradient and average liquid holdup were used as validation criteria of the model. Comparative basis for simulations was our own data-base obtained in experiments carried out in a TBR operating at a co-current downward gas and liquid flow. Estimated errors showed that the classical equations of Attou et al. (1999) defining the friction factors Fjk approximate experimental values of hydrodynamic parameters with the best agre…

Analysis of the hydrodynamics of a periodically operated trickle-bed reactor—A shock wave velocity

2014

Abstract The relationship describing the shock wave velocity was formulated for the trickle-bed reactor operating at periodically changed feeding the bed with liquid phase. The values of shock wave velocity calculated from derived equations were compared with experimental values obtained for both fast and slow mode of base–pulse periodic liquid feeding and using liquids differing in physicochemical properties. A good agreement between these two sets of values of shock wave velocity was obtained. It has to be emphasized that the relationship (Eq. (26) ) derived in this study enables to estimate the values of the shock wave velocity when only mean values of variables of a process are known.