Search results for "Telecommunication"

showing 10 items of 1769 documents

Detection and Discrimination of Inter-Turn Short Circuit and Demagnetization Faults in PMSMs Based on Structural Analysis

2021

This paper presents a fault diagnosis method based on structural analysis of permanent magnet synchronous motors (PMSMs), focusing on detecting and discriminating two of the most common faults in PMSMs, namely demagnetization and inter-turn short circuit faults. The structural analysis technique uses the dynamic mathematical model of the PMSM in matrix form to evaluate the system’s structural model. After obtaining the analytical redundancy using the over-determined part of the system, it is divided into redundant testable sub-models. Four structured residuals are designed to detect and isolate the investigated faults, which are applied to the system in different time intervals. Finally, th…

Permanent magnet synchronous motorComputer scienceDemagnetizing field020206 networking & telecommunications02 engineering and technologyFault (power engineering)symbols.namesakeAdditive white Gaussian noiseControl theoryTurn (geometry)0202 electrical engineering electronic engineering information engineeringRedundancy (engineering)symbols020201 artificial intelligence & image processingSynchronous motorShort circuit2021 22nd IEEE International Conference on Industrial Technology (ICIT)
researchProduct

Reference-Plane Invariant Method for Measuring Electromagnetic Parameters of Materials

2010

This paper presents a simple and effective wideband method for the determination of material properties, such as the complex index of refraction and the complex permittivity and permeability. The method is explicit (non-iterative) and reference-plane invariant: it uses a certain combination of scattering parameters in conjunction with group-velocity data. This technique can be used to characterize both dielectric and magnetic materials. The proposed method is verified experimentally within a frequency range between 2 to 18 GHz on polytetrafluoroethylene and polyvinylchloride samples. A comprehensive error and stability analysis reveals that, similar to other methods based on transmission/re…

PermittivityCondensed Matter - Materials SciencePhysics - Instrumentation and DetectorsRadiationMaterials scienceStability criterionAcoustics020208 electrical & electronic engineeringPhysics::OpticsMaterials Science (cond-mat.mtrl-sci)FOS: Physical sciences020206 networking & telecommunications02 engineering and technologyDielectricInstrumentation and Detectors (physics.ins-det)Condensed Matter Physics0202 electrical engineering electronic engineering information engineeringScattering parametersMeasurement uncertaintyElectrical and Electronic EngineeringWidebandMaterial propertiesRefractive index
researchProduct

Design of Implanted RFID Tags for Passive Sensing of Human Body: The STENTag

2012

Numerical processing of passive UHF-RFID tags' response may provide physical insight about the hosting object or about the nearby environment. This idea is here extended to implanted antennas with the purpose to sense the evolution of some human physiological and pathological process involving a local change of effective permittivity inside the body. The goal is to understand how master the design of this class of devices taking into account both communication and sensing capabilities. An ad hoc design methodology is here presented and discussed by means of a realistic medical case concerning the modification of an endo-vascular device to achieve a STENTag able to sense the state of the ves…

PermittivityRFIDClass (computer programming)RFID Implanted sensorComputer sciencebusiness.industryProcess (computing)Settore ING-INF/02 - Campi ElettromagneticiObject (computer science)Passive sensingImplantable antenna RFID sensorElectronic engineeringState (computer science)Electrical and Electronic EngineeringTelecommunicationsbusinessImplanted sensor
researchProduct

Transmission of Genetic Properties in Permutation Problems: Study of Lehmer Code and Inversion Table Encoding

2021

Solution encoding describes the way decision variables are represented. In the case of permutation problems, the classical encoding should ensure that there are no duplicates. During crossover operations, repairs may be carried out to correct or avoid repetitions. The use of indirect encoding aims to define bijections between the classical permutation and a different representation of the decision variables. These encodings are not sensitive to duplicates. However, they lead to a loss of genetic properties during crossbreeding. This paper proposes a study of the impact of this loss both in the space of decision variables and in that of fitness values. We consider two indirect encoding: the …

PermutationTransmission (telecommunications)Computer scienceEncoding (memory)Lehmer codeGenetic algorithmCrossoverArithmeticRepresentation (mathematics)Bijection injection and surjection
researchProduct

High-repetition-rate source delivering optical pulse trains with a controllable level of amplitude and temporal jitters

2020

International audience; We theoretically propose and numerically validate an all-optical scheme to generate optical pulse trains with varying peak-powers and durations. A shaping of the spectral phase thanks to discrete /2 phase shifts enables an efficient phase-to-intensity conversion of a temporal phase modulation based on a two-tone sinusoidal beating. Experiments carried out at telecommunication wavelengths and at a repetition rate of 10 GHz confirm the ability of our approach to efficiently generate a train made of pulses with properties that vary from pulse-to-pulse. The levels of jitters can be accurately controlled.

Phase (waves)FOS: Physical sciences02 engineering and technologyoptical telecommunications01 natural scienceslcsh:QA75.5-76.95010309 optics020210 optoelectronics & photonicsOptics0103 physical sciences0202 electrical engineering electronic engineering information engineeringhigh-repetition rate optical pulse trainsPhysics[PHYS.PHYS.PHYS-OPTICS]Physics [physics]/Physics [physics]/Optics [physics.optics]optical component testingRepetition (rhetorical device)business.industryhigh‐repetition rate optical pulse trainsPulse (physics)WavelengthAmplitudelcsh:TA1-2040Trainlcsh:Electronic computers. Computer sciencebusinesslcsh:Engineering (General). Civil engineering (General)Phase modulationOptics (physics.optics)Physics - Optics
researchProduct

Hydrogen sensor based on a palladium-coated fibre-taper with improved time-response

2006

Abstract We report an experimental study of the response of a hydrogen sensor, based on a palladium-coated tapered optical fibre, at different temperatures in the range −30 to 80 °C. We have studied the transmission, the time-response and the initial response velocity, being able to correlate these measurements with the pressure–composition isotherms of the Pd–H system and its phase transitions. Heating of the palladium layer optically with an auxiliary laser diode permits to improve the sensor's time-response at low temperatures.

Phase transitionRange (particle radiation)Optical fiberMaterials scienceLaser diodeMetals and AlloysAnalytical chemistrychemistry.chemical_elementCondensed Matter PhysicsHydrogen sensorSurfaces Coatings and FilmsElectronic Optical and Magnetic Materialslaw.inventionchemistryTransmission (telecommunications)lawMaterials ChemistryElectrical and Electronic EngineeringComposite materialInstrumentationLayer (electronics)PalladiumSensors and Actuators B: Chemical
researchProduct

Thermoelectric radiation detector based on a superconductor-ferromagnet junction : Calorimetric regime

2018

We study the use of a thermoelectric junction as a thermal radiation detector in the calorimetric regime, where single radiation bursts can be separated in time domain. We focus especially on the case of a large thermoelectric figure of merit $ZT$ affecting significantly for example the relevant thermal time scales. This work is motivated by the use of hybrid superconductor/ferromagnet systems in creating an unprecedentedly high low-temperature $ZT$ even exceeding unity. Besides constructing a very general noise model which takes into account cross correlations between charge and heat noise, we show how the detector signal can be efficiently multiplexed by the use of resonant LC circuits gi…

PhotonTerahertz radiationinductorsFOS: Physical sciencesGeneral Physics and Astronomy02 engineering and technologysuperconductors7. Clean energy01 natural sciencesNoise (electronics)Particle detectorsuprajohteetradiation detectorsMesoscale and Nanoscale Physics (cond-mat.mes-hall)0103 physical sciencesThermoelectric effectTime domain010306 general physicssignal processingPhysicssuperconducting filmsCondensed Matter - Mesoscale and Nanoscale Physicsta114ta213Detector021001 nanoscience & nanotechnology3. Good healthComputational physicsThermal radiationilmaisimetlämpösäteily0210 nano-technologytelecommunications engineeringJournal of Applied Physics
researchProduct

Real-time and low-cost sensing technique based on photonic bandgap structures

2011

[EN] A technique for the development of low-cost and high-sensitivity photonic biosensing devices is proposed and experimentally demonstrated. In this technique, a photonic bandgap structure is used as transducer, but its readout is performed by simply using a broadband source, an optical filter, and a power meter, without the need of obtaining the transmission spectrum of the structure; thus, a really low-cost system and real-time results are achieved. Experimental results show that it is possible to detect very low refractive index variations, achieving a detection limit below 2 x 10(-6) refractive index units using this low-cost measuring technique. (C) 2011 Optical Society of America[

PhotonsTime FactorsMaterials sciencebusiness.industrySensorsWave-GuidesOptical DevicesPhysics::OpticsSodium ChlorideSlow lightAtomic and Molecular Physics and OpticsSlow-LightOpticsTransducerTransmission (telecommunications)Fiber Bragg gratingLimit of DetectionBroadbandTEORIA DE LA SEÑAL Y COMUNICACIONESOptoelectronicsBiosensor ArrayPhotonicsOptical filterbusinessRefractive index
researchProduct

The distributed Slow Control System of the XENON100 experiment

2012

The XENON100 experiment, in operation at the Laboratori Nazionali del Gran Sasso (LNGS) in Italy, was designed to search for evidence of dark matter interactions inside a volume of liquid xenon using a dual-phase time projection chamber. This paper describes the Slow Control System (SCS) of the experiment with emphasis on the distributed architecture as well as on its modular and expandable nature. The system software was designed according to the rules of Object-Oriented Programming and coded in Java, thus promoting code reusability and maximum flexibility during commissioning of the experiment. The SCS has been continuously monitoring the XENON100 detector since mid 2008, remotely recordi…

Physics - Instrumentation and Detectorsarchitecture[PHYS.ASTR.IM]Physics [physics]/Astrophysics [astro-ph]/Instrumentation and Methods for Astrophysic [astro-ph.IM]JavaComputer scienceReal-time computingFOS: Physical scienceschemistry.chemical_elementControl and monitor systems online; Control systems; Detector control systems (detector and experiment monitoring and slow-control systems architecture hardware algorithms databases)algorithms01 natural sciencesXenon0103 physical scienceshardwareDETECTOR CONTROL SYSTEMS[PHYS.PHYS.PHYS-INS-DET]Physics [physics]/Physics [physics]/Instrumentation and Detectors [physics.ins-det]CONTROL SYSTEMS010306 general physicsInstrumentation and Methods for Astrophysics (astro-ph.IM)InstrumentationMathematical Physicscomputer.programming_languageTime projection chamber010308 nuclear & particles physicsbusiness.industryControl and monitor systems onlineDetector control systems (detector and experiment monitoring and slow-control systemsEmphasis (telecommunications)Volume (computing)Instrumentation and Detectors (physics.ins-det)Modular design[SDU.ASTR.IM]Sciences of the Universe [physics]/Astrophysics [astro-ph]/Instrumentation and Methods for Astrophysic [astro-ph.IM]chemistryControl systemAstrophysics - Instrumentation and Methods for Astrophysicsdatabases)businesscomputerSystem software
researchProduct

Anharmonic effects on the dynamic behavior’s of Klein Gordon model’s

2021

Abstract This work completes and extends the Ref. Tchakoutio Nguetcho et al. (2017), in which we have focused our attention only on the dynamic behavior of gap soliton solutions of the anharmonic Klein-Gordon model immersed in a parameterized on-site substrate potential. We expand our work now inside the permissible frequency band. These considerations have crucial effects on the response of nonlinear excitations that can propagate along this model. Moreover, working in the allowed frequency band is not only interesting from a physical point of view, it also provides an extraordinary mathematical model, a new class of differential equations possessing vital parameters and vertical singular …

Physics0209 industrial biotechnologyDynamical systems theoryDifferential equationApplied Mathematics020206 networking & telecommunications02 engineering and technologyComputational Mathematicssymbols.namesakeNonlinear system020901 industrial engineering & automationBifurcation theoryClassical mechanicsLine (geometry)0202 electrical engineering electronic engineering information engineeringsymbolsGravitational singularitySolitonKlein–Gordon equationApplied Mathematics and Computation
researchProduct