Search results for "Thermal Analysis"
showing 10 items of 208 documents
Carbon fibre composite materials produced by gamma radiation induced curing of epoxy resins
2008
It is well known that ionizing radiation can initiate polymerization of suitable monomers for many applications. In this work an epoxy dlfunctional monomer has been used as matrix of a carbon fibre composite in order to produce materials through gamma radiation, for aerospace and advanced automotive applications. Radiation curing has been performed at different absorbed doses and, as comparison, also thermal curing of the same monomer formulations has been done. Furthermore some Irradiated samples have been also subjected to a post Irradiation thermal curing in order to complete the polymerization reactions. The properties of the cured materials have been studied by moisture absorption isot…
Synthesis and Characterization of the Hybrid Clay-Based Material Montmorillonite-Melanoidin: A Potential Soil Model
2010
The study of the interactions among metals, minerals, and humic substances is essential in understanding the migration of inorganic pollutants in the geosphere. A considerable amount of organic matter in the environment is associated with clay minerals. To understand the role of organic matter in the environment and its association with clay minerals, a hybrid clay-based material (HCM), montmorillonite (STx-1)-melanoidin, was prepared from L-tyrosine and L-glutamic acid by the Maillard reaction. The HCM was characterized by elemental analysis, nuclear magnetic resonance, x-ray photoelectron spectroscopy (XPS), scanning transmission x-ray microscopy (STXM), and thermal analysis. The presence…
Gamma-radiation ageing of a low density polyethylene. Effects of irradiation temperature and dose rate
1993
Abstract Ageing due to gamma radiation of a low density polyethylene at various dose rates and temperatures is studied; the effect of thermal treatment only is also considered. The modifications induced in the molecular and crystallinity behaviour of the polymer are investigated by means of gel extraction, measurements of intrinsic viscosity and thermal analysis. Results indicate the occurrence of both crosslinking and oxidative degradation; the extent of the latter increases on decreasing the irradiation dose rate and on increasing the irradiation temperature. Some exceptions are found because of the increase in the mobility of free radicals at high temperature. These effects modify also t…
Transition metal–saccharide chemistry: synthesis, characterization and solution stability studies of cis-dioxomolybdenum saccharide complexes
1998
Six cis-dioxomolybdenum(VI) complexes of simple monosaccharides (D-glucose, D-fructose, D-galactose, D-mannose, D-ribose and D-xylose) have been synthesized and characterized by a variety of analytical and spectral methods. Both the solution and solid-state studies have supported the presence of dimeric structures, formed through the cis-MoO2 moieties and the bridging saccharide units. Solution stability of these complexes as a function of time has also been addressed.
Accelerated ageing due to moisture absorption of thermally cured epoxy resin/polyethersulphone blends. Thermal, mechanical and morphological behaviour
2011
Abstract A model epoxy resin/anhydride system, modified with a polyethersulfone (PES) engineering thermoplastic toughening agent, has been studied under hydrothermal ageing in order to investigate the modification of the thermal, morphological and mechanical behaviour through dynamical mechanical thermal analysis, SEM microscopy and fracture toughness test respectively. Two different concentrations of the toughening agent were used in the blends and two ageing conditions have been considered, consisting of the immersion of the samples in distilled water at constant temperature of 70 °C for 1 week and for 1 month. Dynamical mechanical thermal analysis results on hydrothermally aged materials…
Synthesis of reactive hyperbranched and star-like polyethers and their use for toughening of vinylester–urethane hybrid resins
2004
A vinylester – urethane hybrid resin (VEUH) was toughened by adding various vinyl-functionalized branched polyethers in 10 and 20 wt%. Two sets of hyperbranched polymers (HBPs) with different branching density were compared with a set of six-arm star polymers. Besides the architecture, the polymers also varied in their characteristics (molecular mass and mass distribution, vinyl/hydroxy ratio). The morphology of the modified VEUH was studied by dynamic-mechanical thermal analysis (DMTA), transmission (TEM) and scanning electron microscopy (SEM). The toughness was characterized by the fracture energy ðGcÞ determined on compact tension specimens at room temperature. It was established that th…
Fast Solution Precursor Synthesis of the 2223 Phase: the Role of Lead in the Reaction Pathway
1994
ABSTRACTValuable mechanistic information, about the reaction pathway in the formation of the 2223 phase, has been obtained by the use of a solution synthesis route. The presence of lead in the starting mixture has remarkable effects on the nature and stability of the different intermediates: i) the grain size and morphology of Bi2CuO4 is severely changed, ii) calcium carbonate is partially decomposed to yield the calcium plumbate, iii) the 2201 phase results stabilized against the formation of the collapsed phase Bi17Sr16Cu7O49-δ, iv) the melting point of the intermediate 2212 is lowered by about 10 °C. All these effects, due to lead substitution, contribute to promote the formation of the …
The influence of Fe3+ doping on thermally induced crystallization and phase evolution of amorphous calcium phosphate
2021
The present study investigates thermally induced crystallization and phase evolution of amorphous calcium phosphate (ACP) partially substituted with Fe3+ ions (M/P = 1.5 : 1). It was demonstrated that the presence of Fe3+ ions radically changes the crystallization behavior of ACP and completely prevents the formation of α-tricalcium phosphate (α-TCP, Ca3(PO4)2), which is the first crystalline phase obtained from non-substituted ACP upon thermal treatment. Surprisingly, calcium deficient hydroxyapatite (CDHA) was obtained instead of α-TCP. Such unusual crystallization behavior was observed with a doping level as low as 0.1 mol% with respect to Ca ions. Moreover, it was shown that the presenc…
A new copper(II) chelate complex with polyamines as fire retardant and epoxy hardener: Synthesis, crystal and electronic structure, and thermal behav…
2020
A new (ethylenediamine-N,N′)-(diethylenetriamine-N,N′,N″)-copper(II) hexafluoridosilicate complex, [Cu(eda)(deta)]SiF6 (1) (eda – ethylenediamine; deta – diethylenetriamine), was synthesized by direct interaction of anhydrous CuSiF6 with polyethylenepolyamine (pepa – H2N[C2H4NH]nH, where n = 1 (eda) and 2 (deta)). The crystals of 1 were characterized by IR spectroscopy and X-ray diffraction. Compound 1 consists of SiF62− discrete anions and [Cu(eda)(deta)]2+ complex cations whose Cu2+ ions are chelated by eda and deta. The coordination polyhedron of Cu(II) atom is an elongated square pyramid which consists of four nitrogen atoms belonging to NH2 groups of eda and NH2 and NH groups of …
Synthesis, structural, and thermal characterization of a new binuclear copper(II) chelate complex bearing an amine-hardener for epoxy resins
2016
A new di(μ-carbonato)bis[aqua(diethylenetriamine)copper(II)] hexahydrate complex, [{Cu(NH(C2H4NH2)2)(H2O)(μ-CO3)}2]⋅6H2O (1), was synthesized by direct interaction of malachite with diethylenetriamine (dien). The crystals of 1 were characterized by X-ray powder diffraction and IR spectra, as well as structurally characterized. Compound 1 consists of [{Cu(dien)(H2O)(μ-CO3)}2] discrete units whose CO32– anions play the role of bridging ligands combining two Cu(II) chelate cores into a centrosymmetric dimer. The elongated octahedral environment of Cu2+ consists of three nitrogens of dien and an oxygen from CO32– at the base of the bipyramid; the two apical positions of such polyhedron are occu…