Search results for "Thermal"
showing 10 items of 3576 documents
Redox reactions in the Pt/TiO2–WO3/SiO2 planar system
2014
Abstract The thermal behavior of the titanium–tungsten adhesive layer (30–70 at.%) deposited on a SiO2 substrate followed by a thicker Pt layer was investigated. The resulting Pt/TiW/SiO2 planar system was annealed under air or vacuum. Morphological and chemical characterizations at different stages of the annealing, as a function of several parameters such as treatment atmosphere, annealing temperature and thickness of the Pt film were performed through surface science analyses. When annealing under air, even at mild temperature (773 K), the whole interlayer oxidizes while a low amount of tungsten diffuses through platinum film. This phenomenon is related to tungsten oxidation which acts a…
Electrochemical Studies of Nonstoichiometric TiO<sub>2-x</sub> Ceramic
2014
TiO2 ceramic was prepared using extrusion technology and thermal treatment in two stages: sintering in air and subsequent annealing under high vacuum conditions. Sample thermal treatment in high vacuum conditions causes formation of nonstoichiometric titanium oxide ceramic. As a result electrical conductivity of the material significantly increases. Such a material can be used for electrode production for electrochemical water treatment.
Sub-gap defect density characterization of molybdenum oxide: An annealing study for solar cell applications
2020
AbstractThe application of molybdenum oxide in the photovoltaic field is gaining traction as this material can be deployed in doping-free heterojunction solar cells in the role of hole selective contact. For modeling-based optimization of such contact, knowledge of the molybdenum oxide defect density of states (DOS) is crucial. In this paper, we report a method to extract the defect density through nondestructive optical measures, including the contribution given by small polaron optical transitions. The presence of defects related to oxygen-vacancy and of polaron is supported by the results of our opto-electrical characterizations along with the evaluation of previous observations. As part…
Influence of Anodic and Thermal Barrier Layers on Physicochemical Behavior of Anodic TiO2 Nanotubes
2011
Electrochemical and photo-electrochemical behavior of self-organized TiO2 nanotubes formed in organic solvents have been studied by taking into account the formation of new barrier layers beneath nanotubes either due to the anodic polarization in aqueous solutions or air exposure during high temperature annealing. It has been shown that before annealing, electrochemical and photoelectrochemical answers are dominantly controlled by the physicochemical properties of the anodic barrier layer. Annealing in air at sufficiently high temperatures changes the initial amorphous structure of as-prepared nanotubes and forms a new oxide layer below them due to thermal oxidation of underneath titanium. …
Photoelectrochemical removal of chlorfenvinphos by using WO3 nanorods: Influence of annealing temperature and operation pH
2019
[EN] A visible-light driven photoelectrochemical degradation process has been applied to a solution polluted with the organophosphate insecticide chlorfenvinphos. Different WO3 nanosheets/nanorods have been used as photoanodes. These nanostructured electrodes have been fabricated by anodization of tungsten and, subsequently, they have been subjected to a thermal treatment (annealing). The combined influence of annealing temperature (400¿°C and 600¿°C) and operation pH (1 and 3) on the photoelectrocatalytic behavior of these nanorods has been examined through a statistical analysis. Morphological, structural and photoelectrochemical characterizations have also been carried out. The chlorfenv…
Physicochemical characterization and photoelectrochemical analysis of iron oxide films
2013
Iron oxide films with a nanoporous structure were grown by anodizing sputter-deposited Fe in a fluoride containing ethylene glycol solution and annealed under air exposure at different temperatures. X-ray diffraction and Raman spectroscopy allowed to identify the presence of hematite and/or magnetite after thermal treatment for films annealed at T ≥ 400 °C under air exposure. According to GDOES compositional depth profiles, the thermal treatment sensitively reduced the amount of fluoride species incorporated into the film during the anodizing process. A band gap value of ~2.0 eV was estimated for all the investigated layers, while a flat band potential dependent on both the growth condition…
On the adoption of the Monte Carlo method to solve one-dimensional steady state thermal diffusion problems for non-uniform solids
2013
Abstract The present paper is focussed on the investigation of the potential adoption of the Monte Carlo method to solve one-dimensional, steady state, thermal diffusion problems for continuous solids characterised by an isotropic, space-dependent conductivity tensor and subjected to non-uniform heat power deposition. To this purpose the steady state form of Fourier’s heat diffusion equation relevant to a continuous, heterogeneous and isotropic solid, undergoing a space-dependent heat power density has been solved in a closed analytical form for the general case of Cauchy’s boundary conditions. The thermal field obtained has been, then, put in a peculiar functional form, indicating that it …
Prediction and analysis of high velocity oxy fuel (HVOF) sprayed coating using artificial neural network
2019
Abstract Thermal spray comprises a group of coating processes for coating manufacturing in which metallic or nonmetallic materials are deposited in a molten or semi-molten condition. Most often, the coating properties are significantly influenced by the operating parameters. However, obtaining a comprehensive modeling or analytical analysis of the thermal spray process is too difficult to be practical due to the complex chemical and thermodynamic reactions. Accordingly, the present study aims at applying an artificial neural network (ANN) model to predict the HVOF sprayed Cr3C2−25NiCr coatings and analyze the influence of operating parameters regardless of the intermediate process. The proce…
High temperature reactivity of nickel aluminide diffusion coatings
2008
Abstract The high-temperature oxidation behaviour of nickel aluminides has been studied at 900 °C in air under atmospheric pressure. Yttria doped and undoped specimens of nickel were aluminised and then oxidised for 100 h under isothermal and cycling conditions. The results showed that when yttria is added by metal-organic chemical vapour deposition technique prior to the aluminisation process, it increased the oxidation rate of aluminised nickel, but improved the oxide scale adherence under cyclic conditions. The effects of yttria on the scale morphology, oxidation behaviour and scale spallation tendency are discussed based on the experimental results, using X-ray diffraction (XRD), scanni…
A single-atom heat engine
2015
Making a teeny tiny engine Steam locomotives, cars, and the drinking bird toy all convert heat into useful work as it cycles between two reservoirs at different temperatures. Usually, the working substance where the heat-work conversion occurs is a liquid or a gas, consisting of many molecules. Roβnagel et al. have made a working substance of a single calcium ion in a tapered ion trap. A laser-cooling beam plays the part of a cold reservoir for the calcium ion, and in turn, electric field noise acts as a hot reservoir. Science , this issue p. 325