Search results for "Thermal"
showing 10 items of 3576 documents
Temperature and Emissivity Separation From MSG/SEVIRI Data
2014
In this paper, we analyze the feasibility of applying the temperature and emissivity separation (TES) algorithm to thermal-infrared data acquired with three bands of the Spinning Enhanced Visible and Infrared Imager (SEVIRI) onboard the Meteosat Second Generation platform (SEVTES). The performance of the SEVTES algorithm was tested using data simulated over different atmospheric conditions and surface emissivities, with errors around 1.5% for emissivity and 1.5 K for temperature when atmospheric correction is accurate enough. In contrast, errors on land-leaving radiances higher than 2% or uncertainties on total atmospheric water vapor amount higher than 5% lead to errors on emissivity highe…
Beating Darwin-Bragg losses in lab-based ultrafast x-ray experiments
2017
The use of low temperature thermal detectors for avoiding Darwin-Bragg losses in lab-based ultrafast experiments has begun. An outline of the background of this new development is offered, showing the relevant history and initiative taken by this work. (C) 2017 Author(s). Funding Agencies|Knut and Alice Wallenberg Foundation; ERC [226136]; Finnish Funding Agency for Technology and Innovation TEKES; Academy of Finland [260880]; NIST Innovations in Measurement Science program; DOE Office of Basic Energy Sciences
Atomic layer deposition of polyimide thin films
2007
The atomic layer deposition (ALD) of different polyimide thin films has been studied. We have demonstrated self-limiting ALD deposition of PMDA–DAH, PMDA–EDA, PMDA–ODA and PMDA–PDA thin films at 160 °C. The maximum deposition rate of 5.8 A cycle−1 was obtained for the PMDA–DAH process. Although the deposition rate was high at 160 °C, a sudden decrease was observed when the temperature was increased. Regardless of the process studied, no film growth was obtained at 200 °C or above. Deposited polyimide films were analysed by FTIR, AFM and TOF-ERDA. According to the FTIR measurements, imide bonds were formed already in as-deposited films indicating polyimide formation without any additional th…
The influence of thin hard coatings on frictional behaviour in the orthogonal cutting process
2000
New knowledge about the tribological response deriving from the interaction of the substrate/coating-chip system, with special attention to the orthogonal cutting process when chatter-free end turning using natural contact tools, is developed. In order to evaluate the frictional behaviour of this process under modified contact conditions, experimental investigations including the contact temperature, the contact loads, friction and the frictional heat flux per unit area were carried out. In contrast to the most obvious approach, the coefficient of sliding friction versus the cutting speed, the contact temperature, the normal pressure and the interface control factor is considered. A number …
ANN Model to predict the bake hardenability of Transformation-Induced Plasticity steels
2009
Neural networks are useful tools for optimizing material properties, considering the material’s microstructure and therefore the thermal treatments it has undergone. In this research an artificial neural network (ANN) with a Bayesian framework able to predict the bake hardening and the mechanical properties of the Transformation-Induced-Plasticity (TRIP) steels was designed. The forecast ability of the ANN model is achieved taking into account the operating parameters involved in the Intercritical Annealing (IA), in the Isothermal Bainite Treatment (IBT) and also considering the different prestrain values and the volume fraction of the retained austenite before the Bake Hardening (BH) treat…
Assessing the electricity consumption of outdoor lighting systems in the presence of automatic control: The OL-BAC factors method
2020
Abstract Building automation systems are able to influence significantly buildings’ energy performance. The BAC factors method, presented for the first time by the International Standard EN 15232, is the most used and simple instrument for evaluating the impact of such systems in terms of reduction of the electrical and thermal energy consumption of buildings services. Nevertheless, Standard EN 15232 does not take into consideration the automation of lighting systems serving buildings’ external areas like passages, gardens, entrance walkways, etc. In some cases, such areas can be very extended and, as a consequence, responsible for a not negligible percentage of the overall electricity cons…
A combined experimental and theoretical study of the thermal cycloaddition of aryl azides with activated alkenes.
2011
International audience; Reactions were performed from aryl azides on the one hand, and activated alkenes coming from β-dicarbonyl compounds or malonodinitrile on the other hand, either with recourse to conventional heating or to microwave activation, to afford 1-aryl-1H-1,2,3-triazoles. The mechanism and the regioselectivity of the reactions involving β-dicarbonyl compounds have been theoretically studied using DFT methods at the B3LYP/6-31G* level: they are domino processes comprising a tautomeric equilibrium of the β-dicarbonyl compounds with their enol forms, a 1,3-dipolar cycloaddition of the enol forms with the aryl azides (high activation energy), and a dehydration process (lower acti…
Experimental system for the study of the directional thermal emission of natural surfaces
2004
A new automatic experimental system was designed to improve the accuracy of multidirectional thermal infrared measurements. This experimental system mainly consists of two identical thermal cameras operating at 8-13 mu m, one metal ring to keep the constant view area for different view angles and a goniometer, which is composed of: (1) a semicircular roadway of 2 m diameter to change the observation angle in the azimuth direction; (2) an elevator of 1 m height to adjust the measuring level to the target level; (3) a rotating arm equipped with one thermal camera for changing the observation angle in the zenith direction; and (4) a fixed arm equipped with another thermal camera to record at n…
Chiral donor–π-acceptor azobenzene dyes
2009
Abstract Four chiral donor–π-acceptor azobenzene dye conjugates were synthesized and characterized. Chiral moieties, namely (S)-(+)-2-(6-methoxy-2-naphthyl)propionic acid (naproxen) and (S)-2-aminopropionic acid ( l -alanine), were attached to either the donor end or the acceptor site of the azo compound using ester or amide bonds, respectively. The structures of the molecules were verified using 1H NMR, 13C NMR and ESI TOF mass spectrometry; spectral properties were evaluated with UV–vis and CD spectrometry whilst thermal stability was determined by TGA. The compounds displayed a broad absorption maximum in the visible region between 433 and 483 nm. All compounds showed relatively high the…
Building integrated solar thermal design: assessment of performances of a low cost solar wall in a typical Italian building
2016
Abstract Present work deals with the topic of building integration of solar thermal collector (BIST) as a refurbishment measure. Such equipment, more than its main function as heating generator, plays a specific role as a building component (envelope finishes, thermal insulation layer, roof cover etc). Consequently, from a heat transfer point of view, an integrated component affects twice the global building balance: supporting the thermal plant (i.e. providing heat for final uses) and modifying the wall heat-transfer pattern (i.e. reducing thermal losses). In turn, the collector performance itself is influenced by the wall structure (back losses reduction). Present work proposes a method f…