Search results for "Thermogravimetric analysi"
showing 10 items of 213 documents
Alkoxide-intercalated NiFe-layered double hydroxides magnetic nanosheets as efficient water oxidation electrocatalysts
2016
Alkoxide-intercalated NiFe-layered double hydroxides were synthesized via the nonaqueous methanolic route. These nanoplatelets exhibit high crystalline quality as demonstrated by atomic resolution scanning transmission electron microscopy combined with electron energy-loss spectroscopy. Moreover, the presence of the alkoxide moieties has been unambiguously demonstrated by means of thermogravimetric analysis coupled to a mass spectrometer. These NiFe-LDHs can be exfoliated in water or organic solvents and processed into homogeneous ultra-thin films (< 3nm thick) with the assistance of O2-plasma. The study of their behaviour as water oxidation electrocatalysts has shown an outstanding perf…
Preparation and characterization of a novel chitosan/Al2O3/magnetite nanoparticles composite adsorbent for kinetic, thermodynamic and isotherm studie…
2015
Abstract In this study we developed a novel chitosan/Al 2 O 3 /magnetic iron oxide nanoparticle composite acting as an adsorbent for removing Methyl Orange (MO), a model anionic dye, from aqueous solution. The new adsorbent was characterized by Scanning Electron Microscope (SEM), Thermo Gravimetric Analysis (TGA), Brunauer–Emmett–Teller (BET) specific surface area, Energy Dispersive spectrometer (EDAX), powder X-ray Diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) methods. The MO removal by the developed adsorbent was investigated using batch adsorption technique and all parameters influencing the removal efficiency such as: dose of adsorbent, pH and initial MO concentr…
Proton Conducting Electrospun Sulfonated Polyether Ether Ketone-Graphene Oxide Composite Membranes
2017
[EN] A series of novel composite membranes, based on sulfonated poly(ether ketone) (SPEEK) with a graphene oxide (GO) layer, were prepared. One contained a GO layer sandwiched between the SPEEK-polyvinyl alcohol (PVA) matrix (SPEEK/PVA@GO), and another deposited thin layers of GO on the nanofibers of SPEEK-polyvinyl butyral (PVB), with both sandwiched in the phase matrix of SPEEK-PVA (SPEEK/PVA@GO-NF). Various nanofiber thicknesses were studied by varying the electrospinning time. The prepared composite membranes with different nanofiber thicknesses were characterized by scanning electron microscopy, water uptake, ionic exchange capacity, thermogravimetric analysis, mechanical properties an…
Ionic Liquids-Cobalt (II) Thermochromic Complexes: How the Structure Tunability Affects "Self-contained" Systems
2021
With the aim of obtaining thermochromic systems with potential applications in solar energy storage, we evaluated the behavior of some sugar-based ionic liquids (ILs)–Co(NTf₂)₂ complexes, in IL solution, as a function of temperature. Different structural changes on the cation, the nature of the anion, and the nature of the IL used as the solvent were considered. The analysis of the above factors was carried out through a combined approach of different techniques, that is, variable temperature UV–vis and NMR spectroscopies, conductivity, and thermal gravimetric analysis. The thermochromic systems were analyzed both as solutions and as thin films, and the data collected highlight the defining…
Benzyl Alcohol Assisted Synthesis and Characterization of Highly Reduced Graphene Oxide (HRG)@ZrO2 Nanocomposites
2017
We demonstrate a one-step solvothermal synthesis of HRG@ZrO2 nanocomposites using benzyl alcohol as solvent and stabilizing ligand. The as-synthesized HRG@ZrO2 hybrid nanocomposites showed a homogeneous distribution of the ZrO2 NPs (≈ 5 nm) onto HRG nanosheets. High resolution (HR)TEM, X-ray diffraction (XRD), and Raman spectroscopy confirmed the presence of cubic ZrO2. The presence of benzyl alcohol as stabilizing ligand was demonstrated by ultraviolet-visible (UV-vis), Fourier-transform infrared (FT-IR) spectroscopy and thermogravimetric analysis (TGA). The reduction of graphene oxide to HRG was also realized by X-ray photoelectron spectroscopy (XPS). A study of the HRG@ZrO2 formation mec…
On the trade-off between processability and opto-electronic properties of single wall carbon nanotube derivatives in thin film heterojunctions
2015
A flow functionalization route has been employed to derivatize single wall carbon nanotubes (SWCNTs) by thienylphenyl groups. The SWCNT derivatives in the most soluble fraction have been characterized by thermogravimetric analysis, DLS analysis, DFT calculations, and UV-vis-NIR, microRaman and IR spectroscopies to study the degree of functionalization, the concentration of SWCNTs in solution, the dimension of the aggregates in solutions, the density of defects, and the presence of the thienylphenyl groups. Thin-film heterojunctions made of SWCNT derivatives and poly(3-hexylthiophene) (P3HT) have been prepared by various methods employing the Langmuir–Schaefer technique, spin-coating and the…
An Approach on the Hydrogen Absorption in Carbon Black after Gamma Irradiation
2013
In this work, different samples of an industrial carbon black are used to study the hydrogen intake from an over pres-surized atmosphere and its changes due to alteration of its level of crystallinity produced by ¿-irradiation. The monitor-ing of the hydrogen adsorption was made by means of thermogravimetric analysis and by measurements of some elec-trical parameters as the Seebeck coefficient. X-ray diffraction shows that the irradiation diminishes the level of crystal-line perfection. These results show interesting possibilities to use carbon black as cheap hydrogen absorbers.
Estimation of hydrogen transfer mechanisms in composite materials
2008
Abstract Spill-over effect as a hydrogen transfer mechanism is proposed to explain an increased capacity of hydrogen absorption and improvement of hydrogen activation kinetics in composite material based on the AB5 type metal hydride and powdered glass. A raw lanthanum nickel alloy AB5 with small amount of additives was used as catalyst and bulk material for hydrogen storage, and a borosilicate glass powder with developed surface was applied as a support material. Thermogravimetric technique to determine an absorbed amount of the hydrogen in materials and X-ray powder diffraction analysis for structural investigations was used.
Water vapor effect on high-temperature oxidation behavior of Fe3Al intermetallics
2009
Fe3Al intermetallics (Fe3Al, Fe3Al-Zr, Fe3Al-Zr,Mo and Fe3Al-Zr, Mo, Nb) were oxidized at 950 °C in dry and humid (11 vol% water) synthetic air. Thermogravimetric measurements showed that the oxidation rates of the tested intermetallics were lower in humid air than in dry air (especially for Fe3Al-Zr, Mo and Fe3Al-Zr, Mo, Nb). The addition of small amounts of Zr, Mo or Nb improved the kinetics compared with that of the undoped Fe3Al. Fe3Al showed massive spallation, whereas Fe3Al-Zr, Fe3Al-Zr, Mo and Fe3Al-Zr, Mo, Nb produced a flat, adherent oxide layer. The rapid transformation of transient alumina into alpha alumina may explain the decrease in the oxidation rate in humid air.
Thermo-oxidative ageing of an organo-modified clay and effects on the properties of PA6 based nanocomposites
2013
a b s t r a c t In this work a careful investigation on the degradation of an organically modified montmorillonite sample (Cloisite 15A) thermal treated under different atmospheres, namely nitrogen, air and oxygen enriched atmosphere was performed. The exposure time of the thermal treatment ranged between 5 and 300 min. The chemical composition evolution as function of the thermal treatment conditions of the clay organic modifier was monitored by means of combined thermogravimetry/Fourier transform infrared spectroscopy (TGA-FTIR). Moreover, the morphological behaviour of treated Cloisite 15A sam- ples as function of the time and of the decomposition atmosphere was investigated by X-ray dif…