Search results for "Thermoplastic"

Impact of non-functionalized and ionic liquid modified carbon nanotubes on mechanical and thermal properties of ethylene- octene copolymer nanocompos…

2016

In this article the development and characterization of composites made from metallocene based ethylene-octene copolymer (EOC) with 38% octene content, non-modified or modified multi walled carbon nanotubes (MWCNTs), covalently functionalised with long chain hexadecyl moiety imidazolium ionic liquid (IL-f-MWCNTs), is presented. The procedure of MWCNTs functionalization is discussed. In order to obtain a good dispersion of the filler, composites with MWCNTs and IL-f-MWCNTs in the concentration range of 0.5-12 wt.% were made by ultrasonication / thermoplastic mixing method. The results indicated improvement in mechanical properties with increase of the filler content. The methodology of the d…

Ethylene-vinyl Acetate Thermoplastic Copolymers Filled with Multiwall Carbon Nanotubes: Effect of Hydrothermal Ageing on Mechanical, Thermal, and Ele…

2013

A range of properties of two commercial thermoplastic ethylene-vinyl acetate (EVA) copolymers, Elvax 420 and Elvax 450, neat and as melt-mixed composite filled with 15 wt.-% of multi-wall carbon nanotubes (MWCNTs), are studied in the “as produced” state and after hydrothermal ageing. Addition of MWCNTs into the neat copolymers introduces the functionality of electrical conductivity and significantly improves their mechanical properties, while thermal characteristics are slightly affected by the presence of carbon nanotubes. A remarkable increase of the elastic modulus (150%) and stress at failure (50%) in stress–strain experiments as well as creep resistance (40%) of the nanocomposites in c…

Experimental Studies for Modelling the Phase Behaviour of Monomer/Polymer/Disc Composites

2010

Nanoparticles do not stabilize the mixtures of epoxy monomer (prepolymer)/thermoplastic modifier (PS) and the ones of thermoplastic modifier dispersed within cured epoxy matrix. A small amount of thermoplastic co-polymer poly(styrene-b-methyl methacrylate) [P(S-b-MMA)] of MMA 4-22 wt.%, mixed with PS, makes compatible the mixtures with monomer epoxy precursor and cured epoxy matrix. The mixtures of cured epoxy matrix with thermoplastic consisting of PS and P(S-b-MMA), with nanofil 1%, are stable: the instability produced by the nanofil is overcome by the stability provided by the co-polymer. A model by Balazs' group to explain the phase behaviour of polymer/clay composites is extended.

1991

Thermoanalytical studies on an order-disorder transition resulting from supramolecular organization of hydrogen bond motifs in an unpolar (polymer-) matrix are reported. Functional groups having two potential sites for hydrogen bonding (4-carboxyphenylarazole) are located statistically along the polybutadiene backbone. Multistep hydrogen bond formation leads to the formation of association chains whose lengths can be controlled by addition of monofunctional groups (phenylurazole) like in conventional stepgrowth polymers. The association chain length is estimated from the variation of transition enthalpy and «melting» temperature

Cooperative structure formation by combination of covalent and association chain polymers: 4. Designing functional groups for supramolecular structur…

1991

Abstract A small number of polar functional groups are attached to polybutadiene by a polymer analogous reaction. Depending on their molecular structure, different degrees of supramolecular ordering result from the aggregation of these polar groups. In the case of phenylurazole units, which carry a single site for hydrogen-bond complexation, binary contacts are formed; whereas linear association chain structures are formed in the case of polybutadiene carrying phenylurazole units additionally substituted with a carboxy group in meta or para positions of the phenyl ring. In the latter case, association chains aggregate cooperatively to an ordered supramolecular structure. The different struc…

Mechanical, structural and magnetic properties of polypropylene/iron ferrite magnetic nanocomposites

2012

In this research, composites of polypropylene (PP) and a relatively small concentrations of iron ferrite (Fe3O4) nanopowder equal to 2, 5 and 10 wt.% have been made. An methacrylate monomer 2,2'-bis-(4-(2-methylprop-2-enoyloxy)phenyl)- propane (BAD) was added at a small amount (3 wt.%) to part of the composites during the thermoplastic mixing. The BAD has been used as a compatibilizing agent on the phase interaction between the filler and the matrix of polypropylene. It has been found that composites have adjustable mechanical, structural and magnetic properties dependent on the content of magnetic filler. Increase of concentration of ferrite particles affects a notable increase of elastic …

E-beam curing of epoxy based blends in order to produce high performance composites

2007

In this work, blends of a difunctional epoxy monomer and a thermoplastic toughening agent are E-beam irradiated at two different dose rates and two different total absorbed doses. The influence of the processing conditions on the thermal properties and on the morphology of the obtained matrices has been investigated. In particular, it is shown how the increase of the dose rate causes an increase of the temperature during irradiation, thus inducing a simultaneous thermal and radiation curing. On the contrary, at low-dose rate the system mainly undergoes to radiation curing, thus making the cured material very sensible to a post-irradiation thermal treatment with a significant improvement of …

Accelerated ageing due to moisture absorption of thermally cured epoxy resin/polyethersulphone blends. Thermal, mechanical and morphological behaviour

2011

Abstract A model epoxy resin/anhydride system, modified with a polyethersulfone (PES) engineering thermoplastic toughening agent, has been studied under hydrothermal ageing in order to investigate the modification of the thermal, morphological and mechanical behaviour through dynamical mechanical thermal analysis, SEM microscopy and fracture toughness test respectively. Two different concentrations of the toughening agent were used in the blends and two ageing conditions have been considered, consisting of the immersion of the samples in distilled water at constant temperature of 70 °C for 1 week and for 1 month. Dynamical mechanical thermal analysis results on hydrothermally aged materials…

Miscibility of a DGEBA Based Epoxy Resin Blended with Thermoplastic Mixtures of Poly(styrene) and Block Copolymers: Influence of the Copolymer Conten…

2008

The miscibility and phase behavior of ternary systems formed by a DGEBA based epoxy resin, polystyrene (PS), and diblock copolymers has been investigated through phase diagrams experimentally obtai...

Nonisothermal elongational behavior of blends with liquid crystalline polymers

1994

Measurements of melt strength and breaking stretching ratio of several blends of thermoplastic polymers with liquid crystalline polymers are presented. The melt strength behavior depends not only on the viscosity of the blends but also on the temperature dependence of the viscosity. In particular, even if the viscosities of the blends are, at the extrusion temperature, lower than that of the thermoplastic matrices, the melt strength can be larger than that of the pure thermoplastics if its viscosity-temperature curve exceeds that of the matrices far from the solidification temperature. This behavior allows one to spin or film blow these blends despite the low viscosity.