Search results for "TiO2"
showing 10 items of 283 documents
CO2 conversion in a photocatalytic continuous membrane reactor
2016
The reduction of CO2 with water by using photocatalysts is one of the most promising new methods for achieving CO2 conversion to valuable hydrocarbons such as methanol (MeOH). In this work, prepared TiO2-Nafion (TM)-based membranes were used in a photocatalytic membrane reactor, operated in continuous mode, for converting CO2 to methanol. By using the membrane with the best TiO2 distribution, a MeOH flow rate/TiO2 weight of 45 mu mol (g(catalyst) h)(-1) was measured when operating at 2 bar of feed pressure. This value is higher than those reported in most of the literature data to date. Moreover, methanol production is considered as a relevant advance over the existing literature results wh…
Genotoxicity of citrus wastewater in prokaryotic and eukaryotic cells and efficiency of heterogeneous photocatalysis by TiO(2).
2012
Abstract The presence of (±)α-pinene, (+)β-pinene, (+)3-carene, and R-(+)limonene terpenes in wastewater of a citrus transformation factory was detected and analyzed, in a previous study, by using Solid Phase Micro-extraction (SPME) followed by GC analyses. Purpose of that research was to compare the genotoxic responses of mixtures of terpenes with the genotoxicity of the individual compounds, and the biological effects of actual wastewater. Genotoxicity was evaluated in the Salmonella reversion assay (Ames test) and in V79 cells by Comet assay. Ames tests indicated that the four single terpenes did not induce an increase of revertants frequency. On the contrary, the mixtures of terpenes ca…
Monolayer Formation of Molybdenum Carbonyl on Cu(111) Revealed by Scanning Tunneling Microscopy and Density Functional Theory
2012
International audience; Molybdenum carbonyl Mo(CO)(6) was adsorbed on the Cu(111) surface at 160 K in the monolayer coverage range and studied by scanning tunneling microscopy. A well-ordered monolayer of hexacarbonyl molecules was observed experimentally for the first time. The monolayer has a hexagonal structure compatible with a (root 7 x root 7)R19 superlattice on the copper (111) plane. The arrangement and orientation of the molecules on the surface were determined by density functional theory calculations, including van der Waals interactions. The comparison of adsorption and cohesive energies reveals that the molecule-substrate interaction is stronger than the intermolecular one, whi…
Antibacterial Properties of Nanoparticles in Dental Restorative Materials. A Systematic Review and Meta-Analysis
2020
Background and Objectives: Nanotechnology has become a significant area of research focused mainly on increasing the antibacterial and mechanical properties of dental materials. The aim of the present systematic review and meta-analysis was to examine and quantitatively analyze the current evidence for the addition of different nanoparticles into dental restorative materials, to determine whether their incorporation increases the antibacterial/antimicrobial properties of the materials. Materials and Methods: A literature search was performed in the Pubmed, Scopus, and Embase databases, up to December 2018, following PRISMA (Preferred Reporting Items for Systematic Review and Meta-Analysis) …
Inorganic gels as precursors of TiO2 photocatalysts prepared by low temperature microwave or thermal treatment
2008
Abstract A simple procedure for preparing active TiO2 photocatalysts is presented. The starting materials were unusual TiO2 gels formed from TiCl4. The use of microwaves for a very short time enhanced the TiO2 crystallinity preventing an increase of particle size and minimizing the decrease of specific surface area. This result makes this preparation very attractive. The formation of the gels was monitored through measurements of viscosity. All the samples were characterized by means of X-ray diffraction, diffuse reflectance spectroscopy and BET specific surface area measurements. The photoactivity of the samples was evaluated using the photodegradation of 4-nitrophenol in liquid–solid regi…
Photocatalytic behaviour of metal-loaded TiO2 aqueous dispersions and films
2007
Abstract Titanium dioxide nanoparticles loaded with Ce, Co, Eu, Sm, W and Yb species were prepared by coprecipitation in mild conditions using TiCl 4 as precursor with the aim to enhance the photocatalytic activity, especially under visible light irradiation. The photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), specific surface area (SSA) determination and UV–Vis diffuse reflectance spectroscopy. The photocatalytic activity of the powders of pure and loaded TiO 2 was investigated by employing the photodegradation of 4-nitrophenol as probe reaction in a liquid–solid system. Loading with suitable amounts of W, Co and Sm resulted in a significan…
The Existence of Nitrate Radicals in Irradiated TiO 2 Aqueous Suspensions in the Presence of Nitrate Ions
2018
Evidence of the existence of nitrate radical in irradiated aqueous TiO2 suspensions in the presence of nitrate ions are reported for the first time. The joint use of UV/Vis and EPR spectroscopy showed that nitrate radicals are formed by hole induced oxidation of nitrate ions. Photocatalytic degradation of a model alkene compound allowed to highlight the presence of an intermediate organic nitrate deriving from nitrate radical attack to the double bond of the substrate. These results not only allow deeper understanding of photocatalytic processes, but open the route to new green photocatalytic syntheses initiated by nitrate radicals and to new insights in the field of atmospheric chemistry.
TIO2 brookite: Properties, synthesis and applications
2017
Brookite is one of the less studied polymorphic phases of titanium dioxide. Indeed, synthetic procedures affording brookite as a pure phase were not straightforward and have been only recently optimized. For this reason, brookite has received particular attention in the last years, especially as a promising photocatalytic material for environmental remediation and for the synthesis of valuable organic products. The present chapter will review the main synthetic methods reported in literature to produce brookite as a pure phase or mixed with rutile and/or anatase. Morphological, structural and electronic properties both of pure or variously modified brookite will be presented. The particular…
Biological effects and photodegradation by TiO(2) of terpenes present in industrial wastewater.
2010
Abstract The aim of this work was to study the biological effects of four monoterpenes, i.e. α-pinene, β-pinene, 3-carene and d -limonene present in the wastewater of a citrus transformation factory. The study was carried out by exposing V79 Chinese hamster cells to single terpene or to the mixture of four terpenes at concentrations corresponding to those in the wastewater evaluated by head space solid phase micro extraction and gas chromatography (HS-SPME-GC) analyses. Treatments with single or combined terpenes similarly affected cell vitality, but only the combined treatments induced the 6-thioguanine resistant mutants. Moreover the photocatalytic degradation of the four terpenes was suc…
A survey of photocatalytic materials for environmental remediation
2012
Abstract Heterogeneous photocatalysis is an advanced oxidation process which has been the subject of a huge amount of studies related to air cleaning and water purification. All these processes have been carried out mainly by using TiO 2 -based materials as the photocatalysts and ca. 75% of the articles published in the last 3 years is related to them. This review illustrates the efforts in the search of alternative photocatalysts that are not based on TiO 2 , with some exceptions concerning particularly innovative modifications as nanoassembled TiO 2 or TiO 2 composites with active carbon, graphite and fullerene. Papers reporting preparation, characterization and testing of binary, ternary…