Search results for "Titan"
showing 10 items of 1109 documents
XPS and EELS investigations of chemical homogeneity in nanometer scaled Ti-ferrites obtained by soft chemistry
1999
Abstract Nanocrystalline Ti-ferrites with composition Fe 3− x Ti x O 4 with 0≤ x ≤1 are synthesized using the soft chemistry route. Heterogeneities in precipitate and annealed powders are investigated by a combination of XPS and EELS techniques. As-prepared powder consists in particles with spinel structure and grain size of about 15 nm. Due to high reactivity towards oxygen of nanoparticules, a significant amount of Fe 2+ cations oxidize during precipitation, so that precipitated powders present large deviation from oxygen-metal stoichiometry. Moreover precipitated particles are evidenced to exhibit a strong surface titanium enrichment and an iron richer core. Observation of such cation se…
Ab initio study of the SrTiO3, BaTiO3 and PbTiO3 (001) surfaces
2004
The results of first-principles calculations of the two possible terminations of (0 0 1) surfaces of SrTiO 3 (STO), BaTiO3 (BTO) and PbTiO3 (PTO) perovskites are presented. Surface atomic structures and their electronic configurations have been calculated using ab initio density functional theory (DFT) combined with hybrid (B3PW) exchange-correlation technique. Our results are compared with previous quantum mechanical calculations and available experimental data. Surface relaxations and the electronic states near valence band gap are discussed in details for all three perovskites. © 2004 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
Organic Polyradicals as Redox Mediators: Effect of Intramolecular Radical Interactions on Their Efficiency
2020
The spin–spin interactions between unpaired electrons in organic (poly)radicals, especially nitroxides, are largely investigated and are of crucial importance for their applications in areas such as organic magnetism, molecular charge transfer, or multiple spin labeling in structural biology. Recently, 2,2,6,6-tetramethylpiperidinyloxyl and polymers functionalized with nitroxides have been described as successful redox mediators in several electrochemical applications; however, the study of spin–spin interaction effect in such an area is absent. This communication reports the preparation of a novel family of discrete polynitroxide molecules, with the same number of radical units but differe…
Assessment of the electrochemical behaviour of Nickel-Titanium-based orthodontic wires: Effect of some natural corrosion inhibitors in comparison wit…
2019
Background The aim of this study is to assess the corrosion resistance behaviour of Nickel-Titanium-based orthodontic wires (NiTi) in different concentrations of Sodium Fluoride (NaF) and the corrosion's inhibitory effect of the extracts of some medicinal plants (essential oils, hydrosols and extract). Material and methods In this study we used NiTi (3M) and CuNiTi (ORMCO, 35°C, California) orthodontic wires. The following electrolytes were prepared: Lactate Ringer solution with additions of 0.1%, 0.5% or 1% of Sodium Fluoride and the extracts of different plants: Artemisia, Syzygium aromaticum (Clove) and Celtis australis. Corrosion resistance was studied using anodic potentiodynamic polar…
Tensile strength and impact strength of color modified acrylic resin reinforced with titanium dioxide nanoparticles
2017
Background Poor mechanical properties are among the main limitations of acrylic resins. Addition of titanium dioxide (TiO2) nanoparticles to acrylic resin has been shown to improve its mechanical properties with an adverse effect on its color. Thus, this study sought to assess the tensile and impact strength of a color modified heat cure acrylic resin reinforced with TiO2 nanoparticles. Material and Methods In this in vitroexperimental study, 1wt% TiO2 nanoparticles were added to SR Triplex Hot heat-cure acrylic resin powder and mixed. Pigments and color fibers were also added and 18 samples were fabricated of this paste for tensile and impact strength testing (n=9) according to ISO5271. Ei…
Thermal effects of continuous laser treatment on Ti-6 Al(wt%)-4V(wt%) titanium alloy
2008
A titanium alloy Ti-6 Al(wt%)-4V(wt%) was treated in air by Nd:YAG laser radiation (wavelength of 1.064 %m) in continuous mode. Targets were irradiated globally with different levels of energy (accumulated fluence) at constant power. Different focal lengths and beam displacement velocities were used. Cross section microstructural observations were carried out by scanning electron microscopy. Backscattered electron imaging reveals microstructural modifications in samples. A structural phase transformation of beta (bcc) to alpha prime (hcp) phase was observed. The depth of the transformed zone observed by phase transformation is dependent on the treatment parameters. Conformity between micros…
Behaviour of advanced tritium breeder pebbles under simultaneous action of accelerated electrons and high temperature
2017
The authors greatly acknowledge the technical and experimen-tal support of O. Valtenbergs and L. Avotina (Institute of Chemical Physics, University of Latvia). The work is performed in the frames of the University of Latvia financed project No. Y9-B044-ZF-N-300, “Nano, Quantum Technologies, and Innovative Materials for Eco-nomics”.
MOCVD growth of TiO2 thin films on single crystal GaAs substrates
2000
Abstract TiO 2 thin films have been grown on (100)GaAs and (111)GaAs substrates by low-pressure metal organic chemical vapour deposition (LP-MOCVD). Titanium(IV) isopropoxide, Ti{OCH(CH 3 ) 2 } 4 , was used as a precursor and TiO 2 films were obtained without an additional oxygen flux. Scanning electron microscopy (SEM) experiments have shown a well ordered rod-like crystallisation in the films grown on (100)GaAs. This ordered crystallisation was favoured by a high deposition temperature ( T d =700°C). By contrast, no distinct order was observed in the films grown on (111)GaAs substrates. X-ray diffraction patterns revealed a mainly rutile structure for the TiO 2 films deposited on (100)GaA…
Mechanism of Formation of TiO2-Doped Mullites from Heated Single-Phase Gels Investigated by Structural and Microstructural Parameters
2008
An analysis of the microstructure of TiO 2 -doped mullites prepared from monophasic gels thermally treated in the temperature range 900°-1600°C is reported. Two series of gels with nominal compositions 3(Al 2-x Ti x O 3 ) ·2(SiO 2 ) and 2(Al 2-x Ti x O 3 )·(SiO 2 ), in the range 0≤x≤0.15, were prepared. X-ray powder diffraction (XRD) and scanning electron microscopy (SEM) were used to follow the structural and textural evolution from gels to the final doped mullites. The crystallite sizes and microstrains were determined by linewidth refinements of XRD patterns using the integral breadth method of Langford and the Warren-Averbach analysis. XRD patterns showed the formation of Al 2 TiO 5 and…
Data on phase and chemical compositions of black sands from “El Ostional” beach situated in Mompiche, Ecuador
2020
Abstract Data revealing the phase and chemical compositions of natural black sands from “El Ostional” beach, located in the northern Ecuadorian Pacific coast have been presented. The samples were collected from six points over the shore area of approximately 500 × 40 m2. The data on crystalline phases (iron titanium oxide, orthoclase feldspar and zircon) were determined by X-ray powder diffraction (XRPD), while semi-quantitative chemical analyses of major (Fe and Ti) and trace elements were obtained by X-ray fluorescence spectroscopy (XRF). The phase composition was verified by scanning electron microscopy (SEM), using backscattered electron (BSE) mode and energy dispersive spectroscopy (ED…