Search results for "Titani"

Original Approach to Synthesize TiO2/ZnO Hybrid Nanosponges Used as Photoanodes for Photoelectrochemical Applications

2021

[EN] In the present work, TiO2/ZnO hybrid nanosponges have been synthesized for the first time. First, TiO2 nanosponges were obtained by anodization under hydrodynamic conditions in a glycerol/water/NH4F electrolyte. Next, in order to achieve the anatase phase of TiO2 and improve its photocatalytic behaviour, the samples were annealed at 450 degrees C for 1 h. Once the TiO2 nanosponges were synthesized, TiO2/ZnO hybrid nanosponges were obtained by electrodeposition of ZnO on TiO2 nanosponges using different temperatures, times, and concentrations of zinc nitrate (Zn(NO3)(2)). TiO2/ZnO hybrid nanosponges were used as photoanodes in photoelectrochemical water splitting tests. The results indi…

Study of phase composition, photocatalytic activity, and photoluminescence of TiO2 with Eu additive produced by the extraction-pyrolytic method

2021

The Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART2. The work was also partially supported by the LZP grant 2020/2-0074. R. Burve has been supported by the project “Synthesis of nanostructured materials based on titanium dioxide and tin dioxide and investigation of their physicochemical properties” Nr. MP-2019/7, for strengthening scientific personnel capacity 2019/2020 at the Riga Technical University. Authors are grateful to Dr. K. Šmits for the microscopic measurements and SEM images.

Photodegradation kinetics of aniline, 4-ethylaniline, and 4-chloroaniline in aqueous suspension of polycrystalline titanium dioxide

2000

The photodegradation process of aniline, 4-ethylaniline, and 4-chloroaniline in aqueous suspension of irradiated TiO2 (anatase) powder has been investigated. A batch photoreactor with immersed lamp irradiating in the near-UV region has been used for carrying out the reactivity experiments. For each substrate the influence of the initial concentration of organic compound and of pH on the degradation rate has been investigated. The main intermediates and the end products have been identified and determined, the total mass balance being satisfied. The kinetic modelling of the series of reactions occurring in the system has been satisfactorily carried out with a Langmuir-Hinshelwood rate law. T…

Electrochemical Investigation of Lithium Intercalation in MOCVD Derived Nanostructured Anatase/Rutile TiO2

2011

In this paper we report on the lithium reversible storage in titanium dioxide (TiO2) prepared by metal-organic chemical vapor deposition (MOCVD). Electrochemical properties in terms of lithium reversible insertion depend on the deposited microstructure. For thick films deposited on silicon wafer electrochemical activity of the anatase type of TiO2 is registered in the potential range 1.8-2.1 V vs. Li. For thinner films the intercalation reaction takes place in two potential ranges: 1.8-2.1 V vs. Li and below 1.4 V vs. Li. The second electroactivity range is attributed to lithium insertion into rutile. We found that the decrease of the lower potential limit (0.5 V instead of commonly used 1 …

Should TiO2 nanostructures doped with Li+ be used as photoanodes for photoelectrochemical water splitting applications?

2017

[EN] Different TiO2 nanostructures, nanotubes and nanosponges, were obtained by anodization of Ti under stagnant and hydrodynamic conditions. Samples were doped with Li+ before and after annealing at 450 degrees C during 1 h. The nanostructures were characterized by different microscopy techniques: Field Emission Scanning Electron Microscopy (FE-SEM) and Raman Confocal Laser Microscopy. Additionally, Incident Photon-to-electron Conversion Efficiency (IPCE), photoelectrochemical water splitting and stability measurements were also performed. According to the results, TiO2 nanostructures doped before annealing present the worst photocurrent response, even if compared with undoped samples. On …

Dimensionless Analysis Of Slurry Photocatalytic Reactors Using Two-Flux And Six-Flux Radiation Absorption-Scattering Models

2007

Photocatalytic oxidation (PCO) over titanium dioxide (TiO2) is a "green" sustainable process for the treatment and purification of water and wastewater. However,the application of PCO for wastewater treatment on an industrial scale is currently hindered by a lack of simple mathematical models that can be readily applied to reactor design. Current models are either too simplistic or too rigorous to be useful in photocatalytic reactor design, scale-up, and optimization. In this paper a simple mathematical model is presented for slurry, annular, photocatalytic reactors that still retains the essential elements of a rigorous approach while providing simple solutions. The model extends the appli…

Characterization of Anodic Oxides on Titanium by Photocurrent and Differential Admittance Techniques

2010

Cutting Fluids

2008

This chapter provides comprehensive knowledge regarding cutting fluids (CFs), their classifications and basic categories, including non-water-miscible, water-miscible and water-based CFs. Main properties and application areas of these three CFs are characterized and specified. Such effects as cooling, lubricating and processing (i.e., the influence on the behaviour of the cutting process) resulting from supplying CFs are outlined. The strategies of delivering CFs to the cutting zone, including flooding, external and internal supply of pressured CFs, along with minimum-quantity lubrication techniques as well as cryogenically cooled gases (CO2 snow and liquid nitrogen (LN2)) are described. So…

Photocatalytic Oxidation of Cyanides in Aqueous Titanium Dioxide Suspensions

1997

The photocatalytic oxidation of free cyanides in aqueous suspensions containing polycrystalline TiO2(anatase) powders irradiated in the near-UV region has been investigated. The rate of cyanide photooxidation has been studied by varying the following operative parameters: (i) initial cyanide concentration; (ii) catalyst concentration; (iii) initial pH; (iv) power of irradiation; and (v) chloride ion concentration in the reacting mixture. Under the used experimental conditions the photoreaction proceeded at a measurable rate until the complete disappearance of cyanides. The kinetics of cyanide photooxidation is affected by the catalyst concentration, the chloride ion concentration, and the p…

Removal of drugs in aqueous systens by photoassisted degradation

2005

Aqueous solutions of tetracycline, lincomycin and ranitidine were irradiated with UV light in homogeneous and heterogeneous systems. Two commercial polycrystalline TiO2 powders (Degussa P25 and Merck) were used as photocatalysts. After 5A h, an appreciable photolytic degradation of tetracycline and ranitidine was observed while the degradation of lincomycin was noticeably lower. As far as the mineralization is concerned, a small decrease of the TOC values was measured in the case of tetracycline whereas negligible variations were found for lincomycin or ranitidine. The presence of the photocatalysts greatly enhanced the degradation rates of the drugs with respect to those observed during th…