Search results for "Toe"
showing 10 items of 3824 documents
HCl gas gettering for crystalline silicon thin film solar cells
2011
Crystalline silicon thin film (cSiTF) solar cells could be an attractive alternative for standard silicon solar cells. Only a small amount of the expensive high purity silicon is needed for the epitaxial deposition on a low-cost silicon substrate made from e.g. metallurgical grade (MG) or upgraded metallurgical grade (UMG) silicon. The resulting product is called epitaxial wafer equivalent (EpiWE) because it can be processed in a standard wafer cell production. MG-Si and UMG-Si still contain a huge amount of metallic impurities. These impurities have to be removed by gettering methods in order to prevent diffusion into the highly pure active silicon layer during the high-temperature deposit…
Minority Carrier Lifetime Variations in Multicrystalline Silicon Wafers with Temperature and Ingot Position
2017
The minority carrier lifetimes of multicrystalline silicon wafers are mapped using microwave photoconductive decay for different temperatures and ingot positions. Wafers from the top of the ingot display larger areas with lower lifetimes compared to wafers from the bottom. The lifetimes of low-lifetime areas are found to increase with the temperature, while the lifetimes of some high-lifetime areas decrease or remain unchanged. The relative improvement of the low-lifetime areas is considerably larger than the relative change in the high-lifetime areas. We suggest that the above-mentioned observations explain, at least partially, why previous studies have found the relative temperature coeff…
Temperature Sensitivity of Multicrystalline Silicon Solar Cells
2019
This paper presents an experimental investigation of the temperature coefficients of multicrystalline silicon solar cells. The aim was to determine if some cell parameters can affect positively the temperature sensitivity without detrimental impact on the efficiency. Commercial solar cells with different bulk resistivities, compensation levels, and cell architectures have been studied. We report that the base net doping, the location of the solar cell along the brick and the cell architecture have significant impacts on the temperature coefficients. Moreover, we show how the change in recombination mechanisms along the ingot height affects the temperature coefficients. The compensation leve…
Improved stability of black silicon detectors using aluminum oxide surface passivation
2021
Publisher Copyright: © 2021 ESA and CNES We have studied how high-energy electron irradiation (12 MeV, total dose 66 krad(Si)) and long term humidity exposure (75%, 75 °C, 500 hours) influence the induced junction black silicon or planar photodiode characteristics. In our case, the induced junction is formed using n-type silicon and atomic-layer deposited aluminum oxide (Al2O3), which contains a large negative fixed charge. We compare the results with corresponding planar pn-junction detectors passivated with either with silicon dioxide (SiO2) or Al2O3. The results show that the induced junction detectors remain stable as their responsivity remains nearly unaffected during the electron beam…
Anisotropic optical response of GaN and AlN nanowires.
2012
We present a theoretical study of the electronic structure and optical properties of free-standing GaN and AlN nanowires. We have implemented the empirical tight-binding method, with an orbital basis sp(3), that includes the spin-orbit interaction. The passivation of the dangling bonds at the free surfaces is also studied, together with the effects on the electronic structure of the nanowire. For both GaN and AlN nanowires, we have found a remarkable anisotropy of the optical absorption when the light-polarization changes, showing in the case of GaN a dependence on the nanowire size.
Reduced Recombination Losses in Evaporated Perovskite Solar Cells by Postfabrication Treatment
2021
The photovoltaic perovskite research community has now developed a large set of tools and techniques to improve the power conversion efficiency (PCE). One such arcane trick is to allow the finished devices to dwell in time, and the PCE often improves. Herein, a mild postannealing procedure is implemented on coevaporated perovskite solar cells confirming a substantial PCE improvement, mainly attributed to an increased open-circuit voltage (V\(_{OC}\)). From a V\(_{OC}\) of around 1.11 V directly after preparation, the voltage improves to more than 1.18 V by temporal and thermal annealing. To clarify the origin of this annealing effect, an in-depth device experimental and simulation character…
Molecular Passivation of MoO3: Band Alignment and Protection of Charge Transport Layers in Vacuum-Deposited Perovskite Solar Cells
2019
Vacuum-deposition of perovskite solar cells can achieve efficiencies rivalling solution-based methods and it allows for more complex device stacks. MoO3 has been used to enhance carrier extraction to the transparent bottom electrode in a p-i-n configuration, here we show that by inserting an organic charge transport molecule it can also be used on the top of a perovskite absorber in a n-i-p configuration. This strategy enables the first vacuum-deposited perovskite solar cells with metal oxides as charge transporting layers for both electrons and holes leading to power conversion efficiency > 19 %.
Preferred Growth Direction by PbS Nanoplatelets Preserves Perovskite Infrared Light Harvesting for Stable, Reproducible, and Efficient Solar Cells
2020
Formamidinium-based perovskite solar cells (PSCs) present the maximum theoretical efficiency of the lead perovskite family. However, formamidinium perovskite exhibits significant degradation in air. The surface chemistry of PbS has been used to improve the formamidinium black phase stability. Here, the use of PbS nanoplatelets with (100) preferential crystal orientation is reported, to potentiate the repercussion on the crystal growth of perovskite grains and to improve the stability of the material and consequently of the solar cells. As a result, a vertical growth of perovskite grains, a stable current density of 23 mA cm(-2), and a stable incident photon to current efficiency in the infr…
Optical Contrast and Raman Spectroscopy Techniques Applied to Few-Layer 2D Hexagonal Boron Nitride
2019
The successful integration of few-layer thick hexagonal boron nitride (hBN) into devices based on two-dimensional materials requires fast and non-destructive techniques to quantify their thickness. Optical contrast methods and Raman spectroscopy have been widely used to estimate the thickness of two-dimensional semiconductors and semi-metals. However, they have so far not been applied to two-dimensional insulators. In this work, we demonstrate the ability of optical contrast techniques to estimate the thickness of few-layer hBN on SiO2/Si substrates, which was also measured by atomic force microscopy. Optical contrast of hBN on SiO2/Si substrates exhibits a linear trend with the number of h…
A Controllable and Highly Propagative Hybrid Surface Plasmon-Phonon Polariton in a CdZnO-based Two-Interface System
2019
The development of new nanophotonic devices requires the understanding and modulation of the propagating surface plasmon and phonon modes arising in plasmonic and polar dielectric materials, respectively. Here we explore the CdZnO alloy as a plasmonic material, with a tunable plasma frequency and reduced losses compared to pure CdO. By means of attenuated total reflectance, we experimentally observe the hybridization of the surface plasmon polariton (SPP) with the surface phonon polariton (SPhP) in the air-CdZnO-sapphire three-layer system. We show how through the precise control of the CdZnO thickness, the resonance frequencies of the hybrid surface plasmon-phonon polariton (SPPP) are tune…