Search results for "Toe"
showing 10 items of 3824 documents
Characterization of Thin Film Cig(S,Se)2 Submodules Using Solar Simulator and Laser Beam Induced Current Techniques
2015
In this work, the electrical and optical characterization of CIG(S,Se)2 sub-modules using both a solar simulator equipment and the Laser Beam Induced Current (LBIC) technique is presented. By using the solar simulator and a proper set-up, the electrical parameters of the modules at varying irradiance and temperatures are determined. In addition, the LBIC measurements are carried out to analyze the 2D photocurrent uniformity of the modules at two different wavelengths. Dispersion values of extracted parameters can be very useful for practically tuning the modelling stage at device/module level.
Photocurrent enhancement in thin a-Si:H solar cells via plasmonic light trapping
2014
Photocurrent enhancement in thin a-Si:H solar cells due to the plasmonic light trapping is investigated, and correlated with the morphology and the optical properties of the selfassembled silver nanoparticles incorporated in the cells' back reflector. © 2014 OSA.
Recent advances in photocurrent spectroscopy of passive films
2003
Abstract The quantitative application of photocurrent spectroscopy (PCS) for the in-situ determination of the composition of passive films and corrosion layers is reviewed in the light of recent theoretical advances, that have allowed to relate the measured optical gaps to the Pauling electronegativities of the film components. The correlations derived are tested versus recent experimental results regarding mixed oxides, anhydrous passive films on metallic alloys and hydroxide layers. The effect of the eventual long-range disorder into the passive film on the optical band gap values is also discussed. New experimental evidence reported for mixed d,d-metal oxides and passive films on sp,d-me…
Amorphous semiconductor-electrolyte junction
1987
Abstract The photoelectrochemical behaviour of amorphous anodic films on niobium (a-Nb 2 O 5 ) grown in a wide range of thicknesses (20 ⩽ d ox ⩽ 25 nm) is presented. The influence of the wavelength, light intensity and film thickness on the photocharacteristics of the a-Nb 2 O 5 /electrolyte junction is investigated. Expressions for the photocurrent curves under steady-state conditions are derived by assuming a variable efficiency of photocarrier generation and different distributions of the electrical potential inside the amorphous films. The influence of the light intensity on the photocharacteristics and the existence of a sub-band-gap photoresponse are explained by assuming a finite den…
Measurement of edge residual stresses in glass by the phase-shifting method
2011
Abstract Control and measurement of residual stress in glass is of great importance in the industrial field. Since glass is a birefringent material, the residual stress analysis is based mainly on the photoelastic method. This paper considers two methods of automated analysis of membrane residual stress in glass sheets, based on the phase-shifting concept in monochromatic light. In particular these methods are the automated versions of goniometric compensation methods of Tardy and Senarmont. The proposed methods can effectively replace manual methods of compensation (goniometric compensation of Tardy and Senarmont, Babinet and Babinet–Soleil compensators) provided by current standards on th…
Review of RGB photoelasticity
2015
Abstract Automatic methods of photoelasticity have had a significant progress with the development of automatic acquisition and image processing methods. This article concerns RGB photoelasticity, which allows the determination of the photoelastic retardation using, usually, a single acquisition of the isochromatic fringes in white light by a colour camera. In particular, the article presents an overview of the main characteristics of RGB photoelasticity that is influence of the quarter-wave plate error, number of acquisitions, type of light source, determination of low and high fringe orders, methods for searching the retardation, scanning procedures, calibration on a material different fr…
Full-field automatic evaluation of an isoclinic parameter in white light
1997
In this paper, a technique for full-field evaluation of the isoclinic parameter is presented. It combines the phase-shifting method with true color imaging technology to minimize the interaction between isoclinic and isochromatic fringes. The paper also shows how the proposed technique can be suitably integrated with known methods for evaluating the retardations. Furthermore, a digital algorithm for filtering wrapped phase data obtained by general phase-shifting techniques is presented.
Ultrasonic Guided Wave Inspection of Bonded Lap Joints: Noncontact Method and Photoelastic Visualization
2001
The main topic of this paper is the nondestructive inspection of adhesively bonded lap joints by using ultrasonic guided (plate) waves. A noncontact, couplant-free method that employs capacitive air-coupled transducers is demonstrated for the inspection of thin aluminum joints with dimensions typical of aircraft fuselage and wing panels. Two types of bond defects, disbonded regions and regions of poorly cured (low-cohesive-strength) adhesive, are successfully detected by measuring the amplitude decrease of selected plate waves leaking from one adherend to the other one through the bondline. It is shown that proper choice of the vibrating mode structure, in terms of cross-sectional displacem…
Developments in RGB photoelasticity
2006
In this paper the combined use of both RGB and phase stepping photoelasticity is proposed. The method is characterised by the following features: maximum measurable order greater than that of the RGB method, ability to determine the total fringe order without necessity of unwrapping.
On-line monitoring of one-step laser fabrication of micro-optical components
2002
The use of an on-line monitoring method based on photoelasticity techniques for the fabrication of micro-optical components by means of controlled laser heating is described. From this description it is possible to show in real time the mechanical stresses that form the microelement. A new parameter, stressed area, is introduced that quantifies the stresses of a microelement during its fabrication, facilitating a deeper understanding of the physical phenomena involved in the process as well as being a useful test of quality. It also permits the stress produced in the manufacturing process and the optical properties of the final microelement to be correlated. The results for several microlen…