Search results for "Toe"

The structure of pumice: An XPS and27Al MAS NMR study

1992

In order to investigate the surface structure of pumice, an amorphous aluminosilicate, samples of pumice and of standards of silica and alumina have been studied by x-ray photoelectron spectroscopy (XPS). The effect of a mild acid leaching was also considered. The analysis of the Si 2p, Al 2p and O 1s photoelectron peaks and the Si KLL and O KLL Auger peaks indicated that pumice is formed by tetrahedral silica with some units being replaced by aluminate, AlO2−. The acid treatment decreases the alkali and the aluminate ions. X-ray photoelectron spectra of the valence band of pumices and of standards of Al2O3 and SiO2 agree with the core-level results. To support the conclusions from the XPS …

2017

The adsorption of molecular acceptors is a viable method for tuning the work function of metal electrodes. This, in turn, enables adjusting charge injection barriers between the electrode and organic semiconductors. Here, we demonstrate the potential of pyrene-tetraone (PyT) and its derivatives dibromopyrene-tetraone (Br-PyT) and dinitropyrene-tetraone (NO2-PyT) for modifying the electronic properties of Au(111) and Ag(111) surfaces. The systems are investigated by complementary theoretical and experimental approaches, including photoelectron spectroscopy, the X-ray standing wave technique, and density functional theory simulations. For some of the investigated interfaces the trends expecte…

Phase composition of Fe-containing Langmuir-Blodgett layers after thermal treatment in a reactive atmosphere

1993

By the Langmuir-Blodgett technique, mono- and multilayers of ferric stearate were drawn onto silicon wafers. They were thermodesorbed in air at 250–300°C, and the layers formed in this way were found to consist of γ-FeOOH with defective stoichiometry. By heating in H2, the layers can be reduced to Fe2− and even to α-Fe. The latter is magnetically ordered and highly corrosion resistant. Chloride ions, however, induce fast corrosion. FeCl2, formed by this corrosion, is rather unstable and transforms to an Fe3+ phase. The high corrosion resistance of the metallic Fe layer is assumed to be due to its excellent homogeneity. The experiments were performed using XPS, AES, CEMS, and SEM.

Oxygen on Fe(100) and Fe(110)

1995

Investigations of the electronic and magnetic properties of oxygen adsorbed on magnetized iron films have been carried out by means of angle and spin resolving photoelectron spectroscopy. Iron, epitaxially grown on W(100) and W(110) crystals, served as the ferromagnetic substrate. Exchange splittings of the O 2px derived level have been detected, demonstrating a magnetic coupling between the chemisorbate and the iron layer. Variations of the exchange splitting have occurred as a function of the oxygen coverage, photon energy, and emission angle. High oxygen exposures have lead to a FeO overlayer at the surface.

MoO (x≤2) ultrathin film growth from reactions between metallic molybdenum and TiO2 surfaces

2001

Abstract Exposures to oxygen at room temperature and annealings under vacuum were carried out on deposits obtained from molybdenum interacting with (1 1 0) TiO 2 surfaces in order to obtain molybdenum oxide ultra thin films. Exposures to oxygen at room temperature show that the interfacial molybdenum oxide layers resulting from the TiO 2 /Mo interactions are inactive towards oxygen whereas the metallic molybdenum clusters, which grew on top of the interfacial layers, oxidise into MoO 3 . Besides, during annealings under vacuum, substrate oxygen anions can diffuse into the deposit. Thus, between 400 and 500°C, molybdenum oxide layers are progressively oxidised into MoO 2 . Moreover, from the…

Study of interface diffusion of Ti and TiN PVD layers by Bremsstrahlung-induced AES

1992

The influence of heat treatment in ultrahigh vacuum (UHV) on Ti and TiN layers coated by physical vapour deposition (PVD) has been studied by AES, XPS and bremsstrahlung-induced AES. It could be concluded that up to 500 o C (1 h) the Ti layer does not change significantly. At the TiN/steel substrate interface, however, a counter-diffusion of nitrogen and adventitious oxygen takes place, resulting in partial nitridation of the steel substrate and oxidation of the coating

Characterization of [Cu]-MCM-41 by XPS and CO or NO adsorption heat measurements

2002

We report the characterization of copper doped MCM-41 prepared by original direct synthesis by XPS and adsorption calorimetry of CO and NO, which are selective molecular probes for Cu(I) and Cu(II) respectively. Investigation of the nature of the copper ions in this particular calcined Cu-MCM-41 by NO adsorption calorimetry shows that two types of energetically distinct adsorption sites exist, meaning the presence of two populations of Cu(II) species differently coordinated to the silica surface in quasi-equimolar concentration, as ascertained by XPS data. A small amount of Cu(I) was also detected, probably stemming from a partial reduction upon the successive vacuum treatments. The respect…

Self-trapped exciton luminescence in crystalline α-quartz under two-photon laser excitation

2003

Abstract The luminescence of pure crystalline α-quartz is studied under pulsed ArF laser excitation. The luminescence parameters obtained correspond well with those of self-trapped excitons (STEs) in α-quartz, indicating that the excitation process is two-photon. The efficiency of two-photon excitation is of the same order of magnitude as the one-photon excitation of sodium salicylate. The STE luminescence decay kinetics and their temperature dependence under photoexcitation were recorded with higher accuracy than previously. Changes in the decay kinetics with temperature are explained by the splitting of the STE triplet state in zero magnetic field and are analyzed with the assumption of t…

Tuning the Magnetic Properties of Carbon by Nitrogen Doping of Its Graphene Domains

2015

Here we present the formation of predominantly sp-coordinate carbon with magnetic- and heteroatom-induced structural defects in a graphene lattice by a stoichiometric dehalogenation of perchlorinated (hetero)aromatic precursors [hexachlorobenzene, CCl (HCB), and pentachloropyridine, NCCl (PCP)] with transition metals such as copper in a combustion synthesis. This route allows the build-up of a carbon lattice by a chemistry free of hydrogen and oxygen compared to other pyrolytic approaches and yields either nitrogen-doped or -undoped graphene domains depending on the precursor. The resulting carbon was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM…

CEMS/XPS study of iron stearate Langmuir-Blodgett layers

1991

Langmuir-Blodgett mono- and multilayers of ferric stearate have been formed on oxidized silicon wafers. Thermodesorption of these layers was investigated by conversion electron Mossbauer and photoelectron spectroscopy and some complementary methods. Heating of samples in air up to 523 K leads to a desorption of the fatty acid chains, while the ferric ions are left on the substrate surface. These ions do not cluster laterally like it was found for Cd ions. They form a rather homogeneous, closed oxidic layer. This well defined layer may be used afterwards for further studies of surface reactions as well as interface and intra-layer interactions. The surface iron ions were found to exhibit a r…