Search results for "Transmittance"
showing 10 items of 89 documents
Single-Polarization Double Refraction in Plasmonic Crystals: Considerations on Energy Flow
2014
We examined the optical properties of nanolayered metal-dielectric lattices. At subwavelength regimes, the periodic array of metallic nanofilms demonstrates nonlocality-induced double refraction, conventional positive and as well as negative. In particular, we report on energy-flow considerations concerning both refractive behaviors concurrently. Numerical simulations provide transmittance of individual beams in Ag-TiO2 metamaterials under different configurations. In regimes of the effective-medium theory predicting elliptic dispersion, negative refraction may be stronger than the expected positive refraction. This research was funded by the Spanish Ministry of Economy and Competitiveness …
A Simple Apparatus for the Determination of the Optical Constants and the Thickness of Absorbing Thin Films
2001
We report on a simple and inexpensive apparatus useful for measuring the optical constants n, k and the thickness of weakly absorbing thin films. The measurement is based on an accurate determination of the reflectance and transmittance of a specimen illuminated by a laser beam. The laser beam is incident on a transparent substrate coated with the film to be evaluated, with an angle of incidence equal to the Brewster angle for the substrate, and its polarization can be switched between the p and s states. If the thickness is known to be within a presumptive range, measurements of the p and s reflectance and transmittance allow a calculation of the optical constants n, k and the thickness of…
Bidirectional sun-induced chlorophyll fluorescence emission is influenced by leaf structure and light scattering properties : a bottom-up approach
2015
Abstract Sun-induced chlorophyll fluorescence (SIF) at leaf level is emitted in both upward and downward directions in the red and far-red part of the spectrum (650–850 nm) when a leaf is illuminated from the upper leaf surface. Hence, total SIF is represented by the sum of the upward and downward emission components. Nevertheless, the downward component of leaf SIF is often not considered despite that downward fluorescence yield (↓FY) can amount up to 40% of the total fluorescence yield (FYtot). Downward SIF is mainly emitted in the far-red, since this part of fluoresced light is highly scattered within leaves, unlike red Chl fluorescence, which is mostly reabsorbed. While total FY can be …
A Temperature-Dependent X-Ray Absorption Characterization of Test Filters for the ATHENA Mission X-IFU Instrument
2018
In order to work properly, the X-ray Integral Field Unit of the ATHENA mission requires a set of thermal filters that block the infrared radiation, preventing it to reach the detector. Each filter will be mounted and thermally anchored onto a shield of the multistage cryostat and will be kept at the specific temperature of the stage. On the other hand, the filters partially absorb X-rays, and their transmittance has to be carefully characterized. The effect of temperature on the absorption edges of the elements that make up the filters has not been investigated yet. Here, we report the results of a preliminary run on the optical transmission data around the edges of C, N, and O at different…
Sizing analysis of interior lighting using tubular daylighting devices
2017
Abstract Daylight access and indoor thermal comfort are key issues for high design level of sustainable buildings. In fact, daylight provides energy savings and visual comfort condition that can foster higher productivity and performance. This paper proposes a case study of sizing of daylight devices for zenith light. It enables the decision-making process of the designer to reach high levels of daylight factor. The proposed method is shown with an example of application. For the case study, a room in south of Italy, 24 different solar tunnels configurations and 12 cases with different number of skylights have been evaluated.
Long term energy efficiency study on different wall envelopes in Latvian climate conditions
2017
Abstract Five test stands have been built in Riga, Latvia equipped with sensors (temperature, solar radiation, humidity, etc.) to measure energy efficiency and thermal comfort conditions. Roof and floor constructions are made the same. For the walls building envelopes differ and typical materials used in Latvia (aerated concrete, ceramic building blocks, wooden log and plywood frame with rock wool insulation) are compared. Only rock wool is used for insulation to provide moisture transport through the construction. For study to be comparative thermal transmittance of all five test stands have been calculated equal (U=0.15…0.16 W/(m 2 ∙K)). The aim of research is to compare the integral calc…
3D Colloidal photonic crystal fabrication improved by AC fields for frequency conversion enhancement in photovoltaics
2011
We report on the fabrication of high-quality 3D colloidal photonic crystals, whose finality is to modify the emission properties of frequency converters for photovoltaic applications. The band structure of the photonic crystals can be used to enhance the emission of down- and up-converters materials embedded in the 3D structures. However, in order to achieve an efficient conversion the first step is to obtain highly ordered templates with appropriated dimensions. We analyze here the photonic crystals obtained by the dip-coating or vertical deposition method. Moreover, by using perpendicular AC fields during the assembly of the nanospheres, the quality of the packed structures has been impro…
In-line fiber-optic sensors based on the excitation of surface plasma modes in metal-coated tapered fibers
2001
Abstract Metal-coated tapered fibers are reported as refractive index sensors based on the resonant excitation of surface plasma modes supported by the metal coating. The devices are easy to fabricate and constitute an alternative to metal-coated side-polished fibers and to other sensors made up of bulk components. We report the fabrication and power transmission properties of quasi-circular devices and asymmetric devices. Both sets of devices can be operated as wavelength output sensors, as well as amplitude output sensors. The transmittance of quasi-circular devices is polarization independent and it changes more than 30 dB as a function of external refractive index.
Extraction of thermal characteristics of surrounding geological layers of a geothermal heat exchanger by 3D numerical simulations
2016
Ground thermal conductivity and borehole thermal resistance are key parameters for the design of closed Ground-Source Heat Pump (GSHP) systems. The standard method to determine these parameters is the Thermal Response Test (TRT). This test analyses the ground thermal response to a constant heat power injection or extraction by measuring inlet and outlet temperatures of the fluid at the top of the borehole heat exchanger. These data are commonly evaluated by models considering the ground being homogeneous and isotropic. This approach estimates an effective ground thermal conductivity representing an average of the thermal conductivity of the different layers crossed by perforation. In order …
Optimization of ZnO:Al/Ag/ZnO:Al structures for ultra-thin high-performance transparent conductive electrodes
2012
Al-doped ZnO (AZO)/Ag/AZO multilayer coatings (50-70 nm thick) were grown at room temperature on glass substrates with different silver layer thickness, from 3 to 19 nm, by using radio frequency magnetron sputtering. Thermal stability of the compositional, optical and electrical properties of the AZO/Ag/AZO structures were investigated up to 400 °C and as a function of Ag film thickness. An AZO film as thin as 20 nm is an excellent barrier to Ag diffusion. The inclusion of 9.5 nm thin silver layer within the transparent conductive oxide (TCO) material leads to a maximum enhancement of the electro-optical characteristics. The excellent measured properties of low resistance, high transmittanc…