Search results for "Turbines"
showing 10 items of 34 documents
Analysis of a Gas Turbine Almost Real Open Cycle Linked to the SOFC Module Behaviour
2005
Solid oxide fuel cells (SOFCs) are particular promising electrochemical generators for their high operating temperature that makes them suitable for integration with gas turbine cycles and cogeneration. The kind of fuel cell taken into account is the tubular SOFC technology, mainly developed by Siemens-Westinghouse. The SOFC module is fed with natural gas with internal reforming and internal air preheating. Elevated pressures are adopted in order to increase both fuel cell efficiency and power density. The inlet air temperature is set to 630 °C, and the inlet fuel temperature to 200 °C. The heat generated by irreversibility at the electrodes structure is given to the fuel and air flow, and …
Photothermoelastic analysis of thermal stresses in discs with eccentric holes
1970
The paper deals with thermal stresses that arise in discs with eccentric holes, such as are employed in the rotors of multi-stage gas turbines. The stress distribution was analysed by the photothermoelastic method. CR 39 sheets were used as the material and dry ice as the refrigerant. The effect of several geometric parameters on stress distribution, especially the influence of adjacent holes, was investigated by testing 32 configurations of discs. Curves that allow the determination of the peak stresses and optimum spacing of holes are given.
Adaptive Control of a Gas Turbine Engine for Axial Compressor Faults
1996
An adaptive control system for a gas turbine engine which diagnoses conditions of axial compressor faults is proposed and analyzed. Nonlinear models of the gas turbine, neural networks and genetic algorithms are used in this research. The adaptive control system minimizes the reduction in gas turbine performance deriving from non-destructive faults. In the absence of faults, the system automatically performs the optimization of the engine between overhauls. Improvements concern the definition of adaptive control with faults in progress, and the real-time optimization of the engine during its operative life between overhauls. Simulation results of the suggested control system are also discus…
Effect of a Passive Tuned Mass Damper on Offshore Installation of a Wind Turbine Nacelle
2021
Abstract Although the installation of offshore wind turbines takes place in calm seas, successful mating of wind turbine components can be challenging due to the relative motions between the two mating parts. This work investigates the effect of a passive tuned mass damper on the mating processes of a nacelle for a 10-megawatt (MW) offshore wind turbine. A nacelle with lifting wires and a monopile with a mass damper are respectively modelled using the multibody formulation in the HAWC2 program. A single mass damper is tuned to target at the first natural period of the monopile and is coupled to the main program using a dynamic link library. Afterwards, numerical simulations were carried out…
Evaluating the Performances of Small Wind Turbines: A Case Study in the South of Italy
2012
AbstractAmong renewable energy resources, wind energy became more attractive in the last decade. Wind farms installations dramatically increased in areas where climatic conditions, topography and environment have allowed their development. The installation of wind turbines, usually carried out in remote areas, recently began to cover areas identified by a complex terrain such as urban and suburban zones. Although these new sites’ choices are characterized by lower productivity there is increasing interest in wind energy production in both urban and suburban area. In this work the authors have carried out an energy analysis developed from a sample of small wind turbines available on the mark…
The risk management in the international contracts of marine renewable energy : focus on offshore wind farms
2022
At a time when climate change is becoming the main concern, the renewable energy sector is developing extremely rapidly. In order to add other sources to the existing ones and to increase electricity production while ensuring its stability, the sea has quickly been considered as an attractive alternative. However, the creation of a new industry is a major challenge and marine renewable energy projects are very expensive and risky. The concept of risk was created specifically regarding the management of human activities at sea. The example of offshore wind energy allows us to go back to the origins of the notion of risk by considering it from the point of view of the company, and to analyse …
A computational method to optimal control of a wind turbine system using wavelets
2011
Author's version of a chapter in the book: Proceedings of the IEEE International Syposium on Computer-Aided Control System Design (2011). Also avaliable from the publisher at: http://dx.doi.org/10.1109/CACSD.2011.6044551 This paper deals with a computational optimization approach to the problem of state-feedback control design for a wind turbine system. The first step of the study is to develop a reduced order model for the system by considering the most important physical phenomena of aerodynamics and structural dynamics. Moreover, the behavior of the system can be influenced by the coupled dynamics between the tower motions and the blade pitch and turbine speed which can cause instabiliti…
A Micro Wind Generation System for Local DoS Applications
2010
In this paper a wind electrical power generation system for Distributed on Site (DoS) applications is proposed. This system was developed and conceived in order to guarantee simple installation, use and service, obtaining a product that can be easily industrialized and put into the market with limited costs. The field of application of such an electrical generation system is addressed towards domestic or at the most toward condominium applications concerning moreover the opportunity of working in addition to combined photovoltaic and solar-thermal systems to enhance the renewable energy generation at house level (DoS). The proposed system has its hot spot in the blades shape, in the wind fl…
A comparative study on the dynamic response of three semisubmersible floating offshore wind turbines
2019
Abstract Currently, there is a great interest to globally develop offshore wind energy due to the greenhouse effect and energy crisis. Great efforts have been devoted to develop reliable floating offshore wind energy technology to exploit the wind energy resources in deep seas. This paper presents a comparative study of the dynamic response of three different semisubmersible floating wind turbine structures. All the three platforms support the same 5MW wind turbine. The platforms examined are: a V-shaped Semi, an OC4-DeepCwind Semi and a Braceless Semi at 200 m water depth. A dynamic analysis is carried out in order to calculate and compare the performance of these platforms. The comparison…
Low-Head Hydropower for Energy Recovery in Wastewater Systems
2022
Hydraulic turbines for energy recovery in wastewater treatment plants, with relatively large discharges values and small head jumps, are usually screw Archimedes or Kaplan types. In the specific case of a small head jump (about 3 m) underlying a rectangular weir in the major Palermo (Italy) water treatment plant, a traditional Kaplan solution is compared with two other new proposals: a Hydrostatic Pressure Machine (HPM) located at the upstream channel and a cross-flow turbine (CFT) located in a specific underground room downstream of the same channel. The fluid mechanical formulations of the flow through these turbines are analyzed and the characteristic parameters are stated. Numerical ana…