Search results for "Turing"
showing 10 items of 2644 documents
Thermal Characterization of the Chip-Tool Interface When Using Coated Turning Inserts
2000
Abstract This paper reports some results of extensive experimental investigations of the thermal interactions between the coating/substrate and the moving surface of the chip. Semi-orthogonal cutting when bar turning a medium carbon steel and an austenitic stainless steel was carried out. Both flat-faced and grooved inserts coated with TiC, TiC/TiN, and TiC/Al 2 O 3 /TiN were tested. A standard K-type thermocouple embedded in the workpiece was used to convert measured efm's to the interfacial temperatures. In addition, the chiprake contact length and the area of contact were determined by using computer processing of scanned contact images. The minimum steady-state temperature at the interf…
Improvement of the electrochemical behaviour of Zn-electroplated steel using regenerated Cr(III) passivation baths
2014
[EN] Conversion coatings based on trivalent chromium are more sensitive to the presence of zinc and iron impurities than the chromate formulations. This fact contributes to a decrease in the quality of passivation and to the generation of a significant amount of hazardous liquid waste. Recently, a new eco-innovative process based on Emulsion Pertraction Technology (EPT) is being implemented at industrial scale for selectively removing Zn and Fe from spent passivation baths in order to enhance the lifetime of the Cr (III) baths. In this study, the effect of Zn and Fe removal on the electrochemical behaviour of Zn-electroplated steel samples was evaluated by means of polarisation curves and e…
Effect of surfactants and drying rate on barrier properties of emulsified edible films
2007
Summary The effects of globule size, nature and concentration of surfactant, and drying duration of water vapour transmission rate and tensile strength of emulsified edible barriers containing methylcellulose and paraffin wax, were measured. of the six surfactants tested, 0.6% purified glycerol monostearate (GMS) produced films with the lowest water vapour transmission rates and the highest mechanical resistance. Longer drying times of film-forming emulsions produced better barrier and mechanical properties. Control of the film forming emulsion stability allowed the reduction of the water vapour transfer rate by an order of magnitude.
Investigation of absorber and heterojunction in the pure sulphide kesterite
2021
This paper aims to study the properties of the absorber layer and the heterojunction in kesterite solar cells. The Cu2ZnSnS4 (CZTS) thin films were layered on a glass substrate from a colloidal solution of metal salts and thiourea dissolved in a mixture of water and ethanol and deposited by spin coating technique. The samples were then heat treated in a furnace, in the presence of sulphur powder and under a nitrogen gas flow. The results revealed the formation of homogeneous layers of a pure kesterite phase of CZTS crystallites after heat treatment with correct stoichiometry and oxidation states. The optical transmission measurements indicate an energy band-gap of 1.4 eV and an absorption c…
Evolution of the bearing failure map of pinned flax composite laminates aged in marine environment
2020
Abstract Aim of the present paper is to evaluate how the bearing behavior of pinned flax composites can be influenced by their exposition to critical environment such as marine one. To this scope, flax fibers/epoxy pinned laminate was exposed up to 60 days to salt-fog environment, according to ASTM B 117 standard. In particular, samples having different hole diameter (D), laminate width (W), and hole center to laminate free edge distance (E) have been tested under single lap bearing tests at varying the aging exposition time. Following this procedure, an experimental 2D failure map clustering main failure modes was created by placing the experimental results in the plane E/D versus W/D rati…
Mechanical behavior of polylactic acid/polycaprolactone porous layered functional composites
2016
Abstract Biopolymeric porous devices exhibiting graded properties can play a crucial role in several fields, such as tissue engineering or controlled drugs release. In this context, the gradient of a specific property can be achieved by developing porous laminates composed by different types of materials. This work presents for the first time a multi-phasic porous laminate based on polycaprolactone (PCL) and polylactic acid (PLA) prepared by combining melt mixing, compression molding and particle leaching. All the materials were characterized from a morphological and a mechanical point of view. The results put into evidence the possibility to tune and to predict the mechanical properties by…
Prediction of Ductile Fractures in Metal-Forming Processes: an Approach Based on the Damage Mechanics
1994
The Authors propose a new approach for the prediction of ductile fractures in bulk metal forming processes: the approach is based on a numerical analysis able to take into account damage occurrence and evolution in constitutive equations. The model supplies the distribution of the void volume fraction in the workpiece during the deformation path: consequently, the comparison to a critical value, determined by means of a simple tension test, allows to predict the growth of defects. The proposed approach has been applied to the drawing process: the numerical results have been compared with a set of experimental tests showing a good predictive capability of the model.
Analytical stress-strain law of FRP confined masonry in compression: Literature review and design provisions
2017
Abstract The use of Fibre Reinforced Polymer (FRP) wraps has become common in practical applications to retrofit existing columns with poor structural features. Wrapping the member with one or more FRP sheets makes it possible to induce confinement action and enhance strength and ductility. This application has been widely studied and adopted in reinforced concrete members for about twenty years, while its suitability to masonry columns and piers has been investigated during the last decade. The results of several studies were summarized in different design expressions for calculating effective confinement pressure, ultimate compressive stress and strain, and the overall trend of the stress…
Finite element analysis of the out-of-plane behavior of FRP strengthened masonry panels
2017
Abstract In the present study a numerical model is proposed for the response of out-of-plane loaded calcarenite masonry walls strengthened with vertical CFRP strips applied on the substrate by means of epoxy resin. A simplified structural scheme is considered consisting in a beam fixed at one end, subjected to constant axial load and out-of-plane lateral force monotonically increasing. Two different constraint conditions are taken into account: in the first one, the panel is assumed free to rotate at the top end while, in the second one, the rotation is restrained. Three-dimensional finite elements are used for the calcarenite parts and an equivalent constitutive law available in the litera…
Optimization of two-step techniques engineered for the preparation of polyamide 6 graphene oxide nanocomposites
2019
Abstract Different processing conditions to achieve polyamide 6 (PA6)-graphene oxide (GO) nanocomposites were investigated. GO was pre-dispersed in PA6 by three different solvent-based methods and, further, melt processed to prepare nanocomposites at two different loading levels, namely 2 and 5 wt.%. The evolution of rheological and mechanical properties was analyzed by investigating eventual changes in the microstructure and polymer crystallinity, aiming at providing a detailed processing-structure-properties relationship for these systems.