Search results for "ULTRAVIOLET"
showing 10 items of 853 documents
Dispersion-optimized multicladding silicon nitride waveguides for nonlinear frequency generation from ultraviolet to mid-infrared
2016
Nonlinear frequency conversion spanning from the ultraviolet to the mid-infrared (beyond 2.4 μm) is experimentally demonstrated in multicladding silicon nitride (𝑆𝑖𝑋𝑁𝑌) waveguides. By adjusting the waveguide cross-section the chromatic dispersion is flattened, which enhances both the efficiency and the bandwidth of the nonlinear conversion. How accurately the dispersion is tailored is assessed through chromatic dispersion measurements and an experiment/simulation comparison of the dispersive waves' wavelength locations. Undesirable fluctuations of both the refractive index and the dimensions of the waveguide during the fabrication process result in a dispersion unpredictability of at l…
Switchable surface structured hydrogel coatings
2017
Switchable surface structures based on hydrogels are an emerging field in material science, microfluidics, soft robotics and anti-fouling. Here, we describe a novel method that uses a photo-cross-linkable terpolymer to create a hydrogel coating with a switchable surface structure. The terpolymer is based on poly(N-isopropylacrylamide) (PNIPAm) and it is shown that simple coating technologies like slit die coating can be used under ambient conditions. It is also shown that the swelling ratio of the coating is controlled by the energy dose of ultraviolet (UV) light. Simple and complex surface structures were created using respectively single or multiple UV illumination steps through masks and…
Comparative performance of electrospun collagen nanofibers cross-linked by means of different methods.
2009
[EN] Collagen, as the major structural protein of the extracellular matrix in animals, is a versatile biomaterial of great interest in various engineering applications. Electrospun nanofibers of collagen are regarded as very promising materials for tissue engineering applications because they can reproduce the morphology of the natural bone but have as a drawback a poor structural consistency in wet conditions. In this paper, a comparative study between the performance of different cross-linking methods such as a milder enzymatic treatment procedure using transglutaminase, the use of N-[3-(dimethylamino)propyl]-N¿-ethylcarbodiimide hydrochloride/ N-hydroxysuccinimide, and genipin, and the u…
Synthesis and physico-chemical characterization of Au/TiO2 nanostructures formed by novel "cold" and "hot" nanosoldering of Au and TiO2 nanoparticles…
2011
Abstract A novel approach to synthesize Au/TiO2 nanostructures with interesting optical properties is presented and discussed. It is based on the nanoparticle “cold” or “hot” nanosoldering occurring when two water suspensions of Au and TiO2 nanoparticles are merely mixed at room temperature or laser irradiated after mixing. Thanks to the high fraction and mutual reactivity of surface species, immediately after the mixing process, the encounters between Au and TiO2 nanoparticles in liquid phase are enough for “cold” nanosoldering of gold nanoparticles onto TiO2 nanoparticles to occur. The optical characterizations show that this fast process (timescale less than 1 min) is followed by a slowe…
Mg and In Codoped p-type AlN Nanowires for pn Junction Realization.
2019
Efficient, mercury-free deep ultraviolet (DUV) light-emitting diodes (LEDs) are becoming a crucial challenge for many applications such as water purification. For decades, the poor p-type doping and difficult current injection of Al-rich AlGaN-based DUV LEDs have limited their efficiency and therefore their use. We present here the significant increase in AlN p-doping thanks to Mg/In codoping, which leads to an order of magnitude higher Mg solubility limit in AlN nanowires (NWs). Optimal electrical activation of acceptor impurities has been further achieved by electron irradiation, resulting in tunnel conduction through the AlN NW p-n junction. The proposed theoretical scenario to account f…
<title>Use of AlN ceramics in ultraviolet radiation dosimetry</title>
2003
AlN-Y2O3 ceramics is studied as a material for application in the area of ultraviolet radiation (UVR) dosimetry. The properties of optically stimulated luminescence (OSL) and thermally stimulated luminescence (TL) revealed by AlN ceramics are characterized and considered for practical application. A special attention is devoted to studies of the spectral properties of the material, including stimulated luminescence. Spectral properties of the material make it potentially suitable for dosimetric application both in UV-C region (200-290 nm), where it has the maximum sensitivity, and in UV-B+UV-A (290-350 nm) region, where the spectral behavior of its sensitivity coincides rather well with tha…
Formation of an intermolecular charge-transfer compound in UHV codeposited tetramethoxypyrene and tetracyanoquinodimethane
2010
Ultrahigh vacuum (UHV)-deposited films of the mixed phase of tetramethoxypyrene and tetracyanoquinodimethane $({\text{TMP}}_{1}{\text{-TCNQ}}_{1})$ on gold have been studied using ultraviolet photoelectron spectroscopy (UPS), x-ray diffraction (XRD), infrared (IR) spectroscopy, and scanning tunneling spectroscopy (STS). The formation of an intermolecular charge-transfer (CT) compound is evident from the appearance of new reflexes in XRD (${d}_{1}=0.894\text{ }\text{nm}$ and ${d}_{2}=0.677\text{ }\text{nm}$). A softening of the CN stretching vibration (redshift by $7\text{ }{\text{cm}}^{\ensuremath{-}1}$) of TCNQ is visible in the IR spectra, being indicative of a CT on the order of $0.3e$ f…
Electronic functionality of Gd-bisphthalocyanine: Charge carrier concentration, charge mobility, and influence of local magnetic field
2018
Abstract Gadolinium bisphthalocyanine (GdPc2) has been placed among the highest ranked molecular materials considered namely for modern optoelectronic applications including organic solar cells. To improve understanding of the correlation between GdPc2 magnetic properties and its electronic functionality, we experimentally and theoretically studied charge carrier concentration, charge mobility, and influence of local magnetic field on charge carrier transport. For better clearance, all the main studied properties of GdPc2 bisphthalocyanine were compared with Zn phthalocyanine (ZnPc) as a reference material. Conductivity and charge carrier mobility were measured in materials incorporated in …
F-centre luminescence in nanocrystalline CeO2
2013
Nanocrystalline CeO2 powders were synthesized by two cost-effective methods: the self-propagating room temperature (SPRT) method and the precipitation method. Differently prepared samples exhibited different temperature-dependent photoluminescence (PL) in the ultraviolet and visible regions. The PL signals originated from different kinds of oxygen-deficient defect centres with or without trapped electrons (F0, F+ or F++ centres). The temperature-dependent PL spectra were measured using different excitation lines, below (457, 488 and 514?nm) or comparable (325?nm) to the ceria optical band gap energy, in order to investigate the positions of intragap localized defect states. Evidence for the…
Multiband light emission and nanoscale chemical analyses of carbonized fumed silica
2018
Fumed silica with a specific area of 295 m2/g was carbonized by successive phenyltrimethoxysilane treatments followed by annealing in inert atmosphere up to 650 °C. Emission, excitation, kinetics, and photo-induced bleaching effects were investigated by steady state and time-resolved photoluminescence spectroscopies. The local chemistry was also studied by infrared transmission spectroscopy. Strong ultraviolet and visible photoluminescence was observed in the samples after the chemical treatments/modifications and thermal annealing. It has been shown that ultraviolet photoluminescence in chemically modified fumed silica is associated with phenyl groups, while near ultraviolet and visible em…