Search results for "Ultra"
showing 10 items of 4451 documents
In-situ study of multi-phase indium nanoparticle growth on/into CuPcF4 organic thin film in ultra-high vacuum conditions
2021
Abstract We study the in-situ growth of a nanocomposite material consisting of a thin CuPcF4 film and multiphase/multidimensional indium nanoparticles, self-organizing on the surface and in the bulk, at various stages of thermal deposition of metal on an organic film under ultrahigh vacuum conditions. The analysis of high-resolution transmission electron microscopy (HR-TEM) images provided valuable information about the evolution of morphology, size, density, and distribution of indium nanoparticles upon indium deposition. These 2D/3D ultra-small nano-objects turned out to have not only body-centered tetragonal (bct) crystal structure, typical for bulk indium, but also unusual face-centered…
Comparative performance of electrospun collagen nanofibers cross-linked by means of different methods.
2009
[EN] Collagen, as the major structural protein of the extracellular matrix in animals, is a versatile biomaterial of great interest in various engineering applications. Electrospun nanofibers of collagen are regarded as very promising materials for tissue engineering applications because they can reproduce the morphology of the natural bone but have as a drawback a poor structural consistency in wet conditions. In this paper, a comparative study between the performance of different cross-linking methods such as a milder enzymatic treatment procedure using transglutaminase, the use of N-[3-(dimethylamino)propyl]-N¿-ethylcarbodiimide hydrochloride/ N-hydroxysuccinimide, and genipin, and the u…
Synthesis and physico-chemical characterization of Au/TiO2 nanostructures formed by novel "cold" and "hot" nanosoldering of Au and TiO2 nanoparticles…
2011
Abstract A novel approach to synthesize Au/TiO2 nanostructures with interesting optical properties is presented and discussed. It is based on the nanoparticle “cold” or “hot” nanosoldering occurring when two water suspensions of Au and TiO2 nanoparticles are merely mixed at room temperature or laser irradiated after mixing. Thanks to the high fraction and mutual reactivity of surface species, immediately after the mixing process, the encounters between Au and TiO2 nanoparticles in liquid phase are enough for “cold” nanosoldering of gold nanoparticles onto TiO2 nanoparticles to occur. The optical characterizations show that this fast process (timescale less than 1 min) is followed by a slowe…
Synthesis of Titanate Nanotubes Directly Coated with USPIO in Hydrothermal Conditions: A New Detectable Nanocarrier
2011
International audience; Abstract: For the first time, titanate nanotubes (TiONts) coated with USPIO (ultrasmall superparamagnetic iron oxide) without polymer functionalization and directly obtained during TiONts formation is reported. The coating of these tubes was performed directly during the TiONts hydrothermal synthesis. After this treatment, in strongly basic conditions, USPIO particles kept their structure and magnetic properties while their size distribution slightly increased. By coupling zeta-potential measurements and TEM observations at different pH it appeared that interactions between nanotubes and USPIO were not electrostatic. This study presents the new design of a titanate n…
Mg and In Codoped p-type AlN Nanowires for pn Junction Realization.
2019
Efficient, mercury-free deep ultraviolet (DUV) light-emitting diodes (LEDs) are becoming a crucial challenge for many applications such as water purification. For decades, the poor p-type doping and difficult current injection of Al-rich AlGaN-based DUV LEDs have limited their efficiency and therefore their use. We present here the significant increase in AlN p-doping thanks to Mg/In codoping, which leads to an order of magnitude higher Mg solubility limit in AlN nanowires (NWs). Optimal electrical activation of acceptor impurities has been further achieved by electron irradiation, resulting in tunnel conduction through the AlN NW p-n junction. The proposed theoretical scenario to account f…
Phased laser diode array permits selective excitation of ultrasonic guided waves in coated bone-mimicking tubes
2017
This paper validates simulation predictions, which state that specific modes could be enhanced in quantitative ultrasonic bone testing. Tunable selection of ultrasonic guided wave excitation is useful in non-destructive testing since it permits the mediation of energy into diagnostically useful modes while reducing the energy mediated into disturbing contributions. For instance, it is often challenging to distinguish and extract the useful modes from ultrasound signals measured in bone covered by a soft tissue. We show that a laser diode array can selectively excite ultrasound in bone mimicking phantoms. A fiber-coupled diode array (4 elements) illuminated two solid tubes (2-3mm wall thickn…
GigaHertz to TeraHertz Ultrashort Pulse Sources at 1555 nm
2006
We experimentally study the generation of ultrashort pulses through multiple four wave-mixing in optical fibers. Well-separated transform-limited Gaussian pulses are generated at repetition rates ranging from 20 GHz to 1 THz around 1555 nm.
<title>Use of AlN ceramics in ultraviolet radiation dosimetry</title>
2003
AlN-Y2O3 ceramics is studied as a material for application in the area of ultraviolet radiation (UVR) dosimetry. The properties of optically stimulated luminescence (OSL) and thermally stimulated luminescence (TL) revealed by AlN ceramics are characterized and considered for practical application. A special attention is devoted to studies of the spectral properties of the material, including stimulated luminescence. Spectral properties of the material make it potentially suitable for dosimetric application both in UV-C region (200-290 nm), where it has the maximum sensitivity, and in UV-B+UV-A (290-350 nm) region, where the spectral behavior of its sensitivity coincides rather well with tha…
Formation of an intermolecular charge-transfer compound in UHV codeposited tetramethoxypyrene and tetracyanoquinodimethane
2010
Ultrahigh vacuum (UHV)-deposited films of the mixed phase of tetramethoxypyrene and tetracyanoquinodimethane $({\text{TMP}}_{1}{\text{-TCNQ}}_{1})$ on gold have been studied using ultraviolet photoelectron spectroscopy (UPS), x-ray diffraction (XRD), infrared (IR) spectroscopy, and scanning tunneling spectroscopy (STS). The formation of an intermolecular charge-transfer (CT) compound is evident from the appearance of new reflexes in XRD (${d}_{1}=0.894\text{ }\text{nm}$ and ${d}_{2}=0.677\text{ }\text{nm}$). A softening of the CN stretching vibration (redshift by $7\text{ }{\text{cm}}^{\ensuremath{-}1}$) of TCNQ is visible in the IR spectra, being indicative of a CT on the order of $0.3e$ f…
Electronic functionality of Gd-bisphthalocyanine: Charge carrier concentration, charge mobility, and influence of local magnetic field
2018
Abstract Gadolinium bisphthalocyanine (GdPc2) has been placed among the highest ranked molecular materials considered namely for modern optoelectronic applications including organic solar cells. To improve understanding of the correlation between GdPc2 magnetic properties and its electronic functionality, we experimentally and theoretically studied charge carrier concentration, charge mobility, and influence of local magnetic field on charge carrier transport. For better clearance, all the main studied properties of GdPc2 bisphthalocyanine were compared with Zn phthalocyanine (ZnPc) as a reference material. Conductivity and charge carrier mobility were measured in materials incorporated in …