Search results for "Urethane"
showing 10 items of 78 documents
Micro - Architectural Data Extraction for Electrospun Poly (Ester Urethane) Urea Scaffolds for Biomechanical Modeling.
2009
Problem: Soft tissue engineered applications have raised the need for accurate descriptions of tissue microstructure and their contributions to global mechanical behavior [1]. Accurate material image analysis is crucial to model engineered tissue biomechanics. The present study proposes a novel method to automatically collect micro-architectural data from electron micrographs (SEM) of electrospun poly (ester urethane) urea (PEUU). Methods: Sets of contiguous SEM images for electrospun PEUU scaffolds made using three mandrel collection tangential velocities (1.5, 4.5, 9.0 m/s) were analyzed. A combination of thresholding and morphological procedures enabled overlaps of fibers to be detected.…
Identification and Evaluation of Hazardous Pyrolysates in Bio-Based Rigid Polyurethane-Polyisocyanurate Foam Smoke
2021
In this study, rigid polyurethane (PU) and polyisocyanurate (PIR) foam samples made from renewable material (tall oil fatty acid) based polyols were analyzed by pyrolysis gas chromatography mass spectrometry (Py-GC/MS) to obtain information about the full relative smoke content, with a focus on substance identification by their functional groups and hazardousness. The relative content of gaseous products produced during the thermal degradation was evaluated between the two samples, differenced by their assigned isocyanate (NCO) index value—150 and 300. The main thermal degradation components of the rigid PU-PIR foam were found to originate from the decomposition of isocyanate, primarily for…
Synthesis of molecularly uniform model oligomers for 1,5-naphthalene diisocyanate and 1,4-butanediol based polyurethanes by using the 3,5-di-tert-but…
1997
A modified benzyloxycarbonyl (BOC) protective group, the 3,5-di-tert-butyl substituted BOC (3,5-tBBOC) group, was introduced to the stepwise synthesis of molecularly uniform oligourethanes based on 1,5-naphthalene diisocyanate (NDI) and 1,4-butanediol (BDO) for the protection of the amino functions of the starting material 1,5-naphthalene-diamine (NDA). The tert-butyl substituents of the 3,5-tBBOC group significantly improved the solubility of the intermediate products in the oligourethane synthesis. Thus, applying this modified protective group, reactions could be carried out, which were not possible with the conventional BOC group, due to the insolubility of the compounds in all suitable …
MCM-41 silica effect on gel polymer electrolytes based on thermoplastic polyurethane
2012
Abstract Polymer electrolytes were prepared from thermoplastic polyurethane with addition of mixture of N-ethyl(methylether)-N-methylpyrrolidinium trifluoromethanesulfonimide (PYRA12O1TFSI) ionic liquid, lithium bis(trifluoromethanesulfoneimide) salt and propylene carbonate. MCM-41 mesoporous silica was added in proportions ranging from 5 to 20 wt.% with respect to TPU. The electrolytes were characterized by thermogravimetric analysis, differential scanning calorimetry, linear voltammetry and impedance spectroscopy. The MCM-41 addition to the system was found to improve the electrochemical stability of the membranes and to reduce the gel electrolyte/metallic Li interfacial resistance. The f…
Use of new hydroxytelechelic cis-1,4-polyisoprene (HTPI) in the synthesis of polyurethanes (PUs): Influence of isocyanate and chain extender naturean…
2006
AbstractNew segmented polyurethanes (thermoplastic-elastomers) based on previously described hydroxytelechelic cis-1,4-polyisoprene (HTPI), miscellaneous isocyanates and chain extenders at various equivalent ratios were prepared by the classical one-shot method. The influence of the nature of isocyanate and chain extender, as well as their equivalent ratios, on the mechanical and thermal materials behavior was investigated. Thus, a comparative assessment of material properties was performed. Microphase separation of hard and soft segments was observed by DMTA, DSC and AFM. Moreover, according to Thermogravimetric Analysis (TGA), linear relationships depending on the isocyanate and chain ext…
Tunable Structure and Properties of Segmented Thermoplastic Polyurethanes as a Function of Flexible Segment
2019
Segmented thermoplastic polyurethanes (PUs) were synthetized using macrodiols with different functional groups (carbonate, ester, and /or ether) as a segment with a molar mass of 1000 and 2000 g/mol, and 4,4&rsquo
Testing Soil Encasing Materials for Measuring Hydraulic Conductivity of a Sandy-Loam Soil by the Cube Methods
2008
The Cube Method (CM) and the Modified Cube Method (MCM) were developed for measuring vertical (K v ) and horizontal (K h ) saturated hydraulic conductivity of a single soil sample. By these methods, a cube of soil is carved out in situ and a suitable material is applied to enclose the cube in a tightly fitting casing before moving the sample to the laboratory. Problems may be associated with the use of gypsum, originally used to encase soil. The suitability of molten wax and expandable polyurethane foam to encase a soil cube was tested for a sandy-loam soil. Wax-treated samples yielded lower conductivity results than untreated samples by a maximum factor of 3.7. The observed discrepancies w…
Polyurethane and Polyisocyanurate Foams in External Tank Cryogenic Insulation
2013
External tanks of the spacecrafts need not only efficient, but also safe cryogenic insulation materials and the issues of their development are still urgent. At present, polyurethane (PUR) or polyisocyanurate (PIR) foams’ cryogenic insulation is widely applied in the partially reusable launch systems. Factors influencing the cryogenic resistance of external thermal insulation performed of spray-on PUR or PIR foams are characterised based on a wide literature search. They include chemical structure and macromolecules’ architecture of polymeric matrix, physical and mechanical properties of foams, thermal stability and combustibility, cellular structure of foams etc. Experimental data on physi…
Reinforcement Efficiency of Cellulose Microfibers for the Tensile Stiffness and Strength of Rigid Low-Density Polyurethane Foams
2020
Rigid low-density closed-cell polyurethane (PU) foams are widely used in both thermal insulation and structural applications. The sustainability of PU foam production can be increased by using bio-based components and fillers that ensure both enhanced mechanical properties and higher renewable material content. Such bio-based foams were produced using polyols derived from rapeseed oil and microcrystalline cellulose (MCC) fibers as filler. The effect of MCC fiber loading of up to 10 wt % on the morphology, tensile stiffness, and strength of foams has been evaluated. For estimation of the mechanical reinforcement efficiency of foams, a model allowing for the partial alignment of filler fibers…
Cell adhesion on UV-crosslinked polyurethane gels with adjustable mechanical strength and thermoresponsiveness
2021
Temperature-responsive polyurethane (PU) hydrogels represent a versatile material platform for modern tissue engineering and biomedical applications. However, besides intrinsic advantages such as high mechanical strength and a hydrolysable backbone composition, plain PU materials are generally lacking bio-adhesive properties. To overcome this shortcoming, the authors focus on the synthesis of thermoresponsive PU hydrogels with variable mechanical and cell adhesive properties obtained from linear precursor PUs based on poly(ethylene glycol)s (pEG) with different molar masses, isophorone diisocyanate, and a dimerizable dimethylmaleimide (DMMI)-diol. The cloud point temperatures of the dilute,…