Search results for "VIBRATION"

showing 10 items of 823 documents

An equivalent single-layer approach for free vibrations analysis of smart laminated thick composite plates

2012

An equivalent single-layer model for the free vibration analysis of smart laminated plates is presented. The electric and magnetic fields are assumed to be quasi-static and third-order in-plane kinematics is employed to adequately take the shear influence into account when the plate thickness increases. The model governing equations are the plate equations of motion written in terms of mechanical primary variables and effective stiffness coefficients, which take the multifield coupling effects into account. The model shows that the surfaces magneto-electric boundary conditions enter the definitions of the laminate forces and moments resultants. Moreover, it reveals that new stiffness terms,…

CouplingVibration of platesMaterials sciencebusiness.industrySmart LaminateEquations of motionStiffnessMechanicsStructural engineeringCondensed Matter PhysicsAtomic and Molecular Physics and OpticsDisplacement (vector)VibrationShear (sheet metal)Mechanics of MaterialsSignal ProcessingmedicineGeneral Materials ScienceBoundary value problemMagnetoelectroelastic platesElectrical and Electronic Engineeringmedicine.symptombusinessSettore ING-IND/04 - Costruzioni E Strutture AerospazialiCivil and Structural Engineering
researchProduct

Computational investigation and experimental considerations for the classical implementation of a full adder on SO2 by optical pump-probe schemes

2008

International audience; Following the scheme recently proposed by Remacle and Levine Phys. Rev. A 73, 033820 2006 , we investigate the concrete implementation of a classical full adder on two electronic states X˜ 1A1 and C ˜ 1B2 of the SO2 molecule by optical pump-probe laser pulses using intuitive and counterintuitive stimulated Raman adiabatic passage excitation schemes. The resources needed for providing the inputs and reading out are discussed, as well as the conditions for achieving robustness in both the intuitive and counterintuitive pump-dump sequences. The fidelity of the scheme is analyzed with respect to experimental noise and two kinds of perturbations: The coupling to the neigh…

Coupling[PHYS.PHYS.PHYS-OPTICS] Physics [physics]/Physics [physics]/Optics [physics.optics][PHYS.PHYS.PHYS-OPTICS]Physics [physics]/Physics [physics]/Optics [physics.optics]Adder[ PHYS.PHYS.PHYS-OPTICS ] Physics [physics]/Physics [physics]/Optics [physics.optics]010304 chemical physicsChemistryStimulated Raman adiabatic passageGeneral Physics and AstronomyRotational–vibrational spectroscopyTopology01 natural sciencesNoise (electronics)Optical pumpingRobustness (computer science)Quantum mechanics0103 physical sciencesPerturbation theory (quantum mechanics)Physical and Theoretical Chemistry010306 general physics
researchProduct

Zinn - Chalkogen - Heterocyclen. I. 2.4.6-Hexamethyl-1.3.5-triselena-2.4.6-tristannacyclohexan, Massen- und Schwingungsspektren

2010

The mass spectrum of the title compound exhibits very similar fragmentation patterns compared with the sulfur analogon. The high stability of triply coordinated organotin cations is remarkable. There is no evidence for any stabilisation effects by pπ-dπ bonding concerning the ring bonds. The assignment of the vibration spectra leads to the conclusion that the molecule of triselenastanninane possesses a boat conformation.

CrystallographyFragmentation (mass spectrometry)chemistryStereochemistryCyclohexane conformationMass spectrumMoleculechemistry.chemical_elementGeneral ChemistryVibration spectraSulfurBulletin des Sociétés Chimiques Belges
researchProduct

Collisional Broadening, Line Shifting, and Line Mixing in the Stimulated Raman 2-v2 Q-Branch of CH4

1991

0021-9606; Self-, argon-, and helium-broadening coefficients have been measured for 13 lines in the 2v2 Raman Q branch of CH4 using stimulated inverse Raman spectroscopy. The linewidths clearly show the symmetry-state dependence characteristic of pressure broadening, and inelastic processes in general, involving spherical-top molecules. Pressure-induced line shifts have also been measured for these features in pure methane. The pressure-shift coefficients do not display the symmetry-state dependence found for the linewidths. By applying the Rosenkranz perturbation treatment to a pair of collisionally mixed lines, we have been able to obtain an estimate of individual state-to-state contribut…

DOUBLE-RESONANCETUNABLE DIODE-LASERVIBRATIONAL POLYADSSPECTROSCOPYMETHANE LINESTHEORETICAL-ANALYSISINFRAREDROTATIONAL ENERGY-TRANSFERTETRAHEDRAL MOLECULESPhysics::Atomic PhysicsRATESINELASTICLOW-TEMPERATURES
researchProduct

Condition Monitoring Technologies for Synthetic Fiber Ropes - a Review

2020

This paper presents a review of different condition monitoring technologies for fiber ropes. Specifically, it presents an overview of the articles and patents on the subject, ranging from the early 70’s up until today with the state of the art. Experimental results are also included and discussed in a conditionmonitoring context,where failuremechanisms and changes in physical parameters give improved insight into the degradation process of fiber ropes. From this review, it is found that automatic width measurement has received surprisingly little attention, and might be a future direction for the development of a continuous condition monitoring system for synthetic fiber ropes.

Damage detectionComputer scienceEnergy Engineering and Power TechnologyContext (language use)computer visiondamage detectionSystems engineeringcondition based maintenance (cbm)TA168health monitoringComputer Science (miscellaneous)Degradation processSafety Risk Reliability and QualityCivil and Structural Engineeringvibration analysisx-ray tomographyFiber (mathematics)ultrasoundMechanical EngineeringCondition monitoringelectromagnetic methodTA213-215thermographyEngineering machinery tools and implementsSynthetic fiberSystems engineeringoptical damage sensorsInternational Journal of Prognostics and Health Management
researchProduct

Modal Analysis of a Reinforced Concrete Frame in Various States of Damage

2005

The purpose of this paper is to report selected results of an experiment in which two, natural size r/c frames were put on shaking table and subjected to a sequence of seismic excitations with increasing intensity interlaced with low level, diagnostic tests. The shaking table experiment aimed at working out new methodology for monitoring vibrations of r/c structures to assess their state. Characteristic decrease of natural frequencies and increase of structural damping was observed and analyzed in detail. It was interesting to note 20 per cent drop in natural frequencies prior to visual detection of any cracks.

Damage detectionMaterials sciencebusiness.industryMechanical EngineeringModal analysisDiagnostic testStructural engineeringReinforced concreteVibrationVisual detectionMechanics of MaterialsEarthquake shaking tableGeneral Materials SciencebusinessKey Engineering Materials
researchProduct

Assessment of regional ventilation distribution: comparison of vibration response imaging (VRI) with electrical impedance tomography (EIT)

2013

BACKGROUND: Vibration response imaging (VRI) is a bedside technology to monitor ventilation by detecting lung sound vibrations. It is currently unknown whether VRI is able to accurately monitor the local distribution of ventilation within the lungs. We therefore compared VRI to electrical impedance tomography (EIT), an established technique used for the assessment of regional ventilation. METHODOLOGY/PRINCIPAL FINDINGS: Simultaneous EIT and VRI measurements were performed in the healthy and injured lungs (ALI; induced by saline lavage) at different PEEP levels (0, 5, 10, 15 mbar) in nine piglets. Vibration energy amplitude (VEA) by VRI, and amplitudes of relative impedance changes (rel.ΔZ) …

Diagnostic ImagingPathologymedicine.medical_specialtyAnatomy and PhysiologyCritical Care and Emergency MedicinePulmonologyVibration Response ImagingSwineRespiratory SystemLung soundlcsh:MedicineVibrationModel OrganismsRespiratory FailureAnesthesiologyBedside TechnologyElectric ImpedancemedicineMedical imagingAnimalsRespiratory Physiologyddc:610lcsh:ScienceTomographyBiologyElectrical impedance tomographyAnesthesiology MonitoringPhysicsAnalysis of VarianceModels StatisticalAnesthesiology TechnologyMultidisciplinarylcsh:RAnimal Modelsrespiratory systemrespiratory tract diseasesPulmonary imagingSpirometryBreathingMedicinelcsh:QTomographyPulmonary VentilationResearch ArticleBiomedical engineering
researchProduct

Improving the Seismic Response of Tall Buildings: From Diagrid to Megastructures and Mega-Subcontrol Systems

2022

Background: Diagrid structures, widely used for the tall buildings of the third millennium, are characterized by a very effective behaviour in the elastic field due to the grid triangulation. In particular, under horizontal actions, axial forces and deformations mainly arise in the structural members of the diagrid, thus resulting in the reduction of the shear lag effect and racking deformations. The response to incremental horizontal actions beyond the plastic threshold, however, shows a poor plastic redistribution capacity, with consequent low values of global ductility, in spite of a significant design overstrength. Objective: In this paper, it is proposed to exploit the high elastic ef…

Diagrid structures Megastructures Mega-sub-structures Seismic response Vibration control Non-conventional tuned mass damper.Building and Construction
researchProduct

High-pressure crystal structure, lattice vibrations, and band structure of BiSbO4

2016

The high-pressure crystal structure, lattice-vibrations HP crystal structure, lattice vibrations, and band , and electronic band structure of BiSbO4 were studied by ab initio simulations. We also performed Raman spectroscopy, infrared spectroscopy, and diffuse-reflectance measurements, as well as synchrotron powder X-ray diffraction. High-pressure X-ray diffraction measurements show that the crystal structure of BiSbO4 remains stable up to at least 70 GPa, unlike other known MTO4-type ternary oxides. These experiments also give information on the pressure dependence of the unit-cell parameters. Calculations properly describe the crystal structure of BiSbO4 and the changes induced by pressur…

DiffractionAb initioInfrared spectroscopy02 engineering and technologyCrystal structure010402 general chemistry01 natural sciencesMolecular physicsInorganic Chemistrysymbols.namesakeDegradationPhysical and Theoretical ChemistryElectronic band structureChemistryCompressionRefinement021001 nanoscience & nanotechnology0104 chemical sciencesCrystallographyPowder diffractionMolecular vibrationFISICA APLICADATransitionsymbols0210 nano-technologyRaman spectroscopyPowder diffraction
researchProduct

Vibrational Properties of InSe under Pressure: Experiment and Theory

1996

The pressure dependence of the phonon modes in the layered semiconductor γ-InSe has been investigated experimentally and theoretically for pressures up to 11 GPa. The mode Gruneisen parameters of all Raman-active zone-center phonons have been determined by Raman scattering under pressure. In addition, features corresponding to second and third-order scattering processes are apparent in the Raman spectra under resonance conditions, from which information about zone-edge modes can be obtained. For the assignment of the observed Raman features to vibrational modes we have calculated the phonon dispersion curves using a rigid-ion model including couplings to first-nearest neighbors and long-ran…

DiffractionChemistryScatteringPhononAnalytical chemistryPressure experimentCondensed Matter PhysicsMolecular physicsResonance (particle physics)Electronic Optical and Magnetic MaterialsCondensed Matter::Materials Sciencesymbols.namesakeMolecular vibrationsymbolsRaman spectroscopyRaman scatteringphysica status solidi (b)
researchProduct