Search results for "Waste"

Organic chlorine compounds in lake sediments. II Organically bound chlorine

1990

Abstract Organically bound chlorine together with inorganic chloride was measured from dated bottom sediment layers of 18 lakes in Central Finland and compared to organic matter contents. Pulp mills were found to be the source of significant increase of the accumulation of all of these materials in the 20th century.

Performance of a hybrid activated sludge/biofilm process for wastewater treatment in a cold climate region: Influence of operating conditions

2013

a b s t r a c t The main aim of the study was to investigate a hybrid MBBR process, mostly in terms of organic matter removal and nitrification, when operating with different values of the mixed liquor sludge retention time (SRT), and highlighting the influence of temperature on the process. Based on experience in practice it was hypothesized that nitrification could be maintained at far lower SRT's than in conventional activated sludge systems and with high organic loading rates applied. A field gathering campaign has been carried out on a hybrid activated sludge/biofilm. The obtained results highlighted that the pilot plant was capable to remove the organic matter at loading rates up to 3…

Biofiltration of ethylbenzene vapours: influence of the packing material.

2006

In order to investigate suitable packing materials, a soil amendment composed of granular high mineralized peat (35% organic content) locally available has been evaluated as carrier material for biofiltration of volatile organic compounds in air by comparison with a fibrous peat (95% organic content). Both supports were tested to eliminate ethylbenzene from air streams in laboratory-scale reactors inoculated with a two-month conditioned culture. In pseudo-steady state operation, experiments at various ethylbenzene inlet loads (ILs) were carried out. Maximum elimination capacity of about 120 g m(-3) h(-1) for an IL of 135 g m(-3) h(-1) was obtained for the fibrous peat. The soil amendment re…

Characterization of interaction between tricyclic structures containing pharmaceuticals, their models and humic substances.

2011

Their persistence and wide consumption identify pharmaceuticals as “emerging pollutants”. The complexation of pharmaceuticals containing adamantine ring structures and their model substances with humic acids (HA) of different origins was compared using fluorescence spectroscopy as a function of pH, humic acid concentration, ionic strength, and molecular mass of HA. Binding constants between the studied pharmaceuticals and humic acids were calculated. A combination of dynamic and static quenching processes as indicated by nonlinear Stern-Volmer plots and high Kd values were positively correlated with the concentration of carboxyl groups in the studied humic acids. For basic functional group-…

Anaerobic batch degradation of solid poultry slaughterhouse waste

2000

We studied anaerobic batch degradation of solid poultry slaughterhouse wastes with different initial waste and inoculum concentrations and waste-to-inoculum ratios and simulated the dynamics of the process with a new generation <METHANE> model. Our modelling results suggest that inhibited propionate degradation by long-chain fatty acids (LCFA) and inhibited hydrolysis by a high propionate concentration constituted the rate-limiting step in the waste degradation. Palmitate was the most abundant LCFA in the assays. Within 27 days of incubation, up to 0.55 to 0.67 m3 of methane (STP)/kg VS added was produced under the studied conditions. Lower waste-to-inoculum ratios exhibited a…

Design and evaluation of sensory systems based on amphiphilic anthraquinones molecular receptors

2015

A new paradigm is described that allows one to create different types of sensors: from highly sensitive ones to practical household devices. Our approach relies on modular molecular receptors incorporating an intensely-colored aminoanthraquinone signaling unit equipped with both hydrophilic and hydrophobic modules, the number and size of which being configured in accordance with the targeted analyte and the sought detection method. An important advantage is the compliance with some principles of green chemistry, avoiding the use of toxic organic solvents. The proper functionalization of the anthraquinone scaffold afforded water-soluble chromoinophores capable of quantifying selectively Hg2+…

How Humic Substances Dominate Mercury Geochemistry in Contaminated Floodplain Soils and Sediments

1998

The interaction of mercury (Hg) and humic substances (hs) was studied in floodplain topsoils and surface sediments of the contaminated German river Elbe. An intimate coupling exists between the geochemical cycles of Hg and organic carbon (OC) in this ecosystem. Humic substances exert a dominant influence on several important parallel geochemical pathways of Hg, including binding, transformation, and transport processes. Significant differences exist between the Hg-hs associations in floodplains and sediments. Both humic acids (ha) and fulvic acids (fa) contribute to Hg binding in the sediments. In contrast, ultrafiltration experiments proved that Hg in the floodplain soils is almost exclusi…

Polymer mechanical recycling: downcycling or upcycling?

2004

Recycled plastics are considered as materials with physical, mechanical and aesthetic properties worse than the virgin ones. In fact, this is true because degradation during lifetime and during the recycling operations changes the structure and the morphology of the polymers and then the final properties of the secondary material. Several “strategies” are under investigation, and in some cases also applied, in order to avoid further degradation during recycling and, if possible, to repair the macromolecules broken during lifetime and then to restore or to improve the initial properties. In this paper the more important techniques, already used in industry or under investigation, according …

2019

Abstract The preparation method of a polymer composite and the filler loading are amongst the factors that influence the properties of the final composites. This article studies the effect of these factors on the thermal stability and thermal degradation kinetics of poly(methyl methacrylate) (PMMA)/mesoporous silica (MCM-41) composites filled with small amounts of MCM-41. The PMMA/MCM-41 composites were prepared through in situ polymerisation and melt mixing methods, with MCM-41 loadings of 0.1, 0.3, and 0.5 wt.%. The presence of MCM-41 increased the thermal stability of PMMA/MCM-41 composites prepared by melt mixing, but in the case of the in situ polymerised samples, the MCM-41 accelerate…

Virucidal effect of high power ultrasound combined with a chemical sanitizer containing peroxyacetic acid for water reconditioning in the fresh-cut i…

2015

The use of chlorine-based sanitizers is widespread throughout the fresh produce industry in the process water to maintain microbial safety of produce, avoid cross-contamination and recycle water. In this study, alternative disinfection technologies were investigated due to the negative reports showing chlorine instability in the presence of organic matter and the undesirable by-product residues. Tsunami ® (15.2% peroxyacetic acid and 11.2% hydrogen peroxide) and high-power ultrasound (HPU, 0.56 kW/l, 20 kHz), alone or in combination, were evaluated in lettuce process water analyzing their ability to reduce MNV during either produce washing or water recycling. PAA concentrations of 6.4, 12.8…