Search results for "Wastewater treatment"
showing 10 items of 178 documents
Oxidation of organics in water in microfluidic electrochemical reactors: Theoretical model and experiments
2011
The electrochemical oxidation of organics in water performed in micro reactors on boron doped diamond (BDD) anode was investigated both theoretically and experimentally in order to find the influence of various operative parameters on the conversion and the current efficiency CE of the process. The electrochemical oxidation of formic acid (FA) was selected as a model case. High conversions for a single passage of the electrolytic solution inside the cell were obtained by operating with proper residence times and low distances between cathode and anode. The effect of initial concentration, flow rate and current density was investigated in detail. Theoretical predictions were in very good agr…
Electrochemical treatment of wastewater contaminated by organics and containing chlorides: Effect of operative parameters on the abatement of organic…
2022
Abstract In the last years, large attention has been devoted to the electrochemical treatment of wastewater polluted by recalcitrant organics and containing chlorides. However, the utilization on an applicative scale of this route is limited by the fact that usually it is not possible to achieve high removals of organics without the generation of significant amounts of chlorinated by-products. Here, the role of several operative parameters on the performances of the process was systematically evaluated using phenol as a model organic pollutant. It was shown that the removal of phenol and TOC and the generation of many by-products including chlorophenols, chloroacetic acids, chlorate and per…
Anodic abatement of organic pollutants in water in micro reactors
2010
The electrochemical oxidation of oxalic acid (OA) was performed in a micro flow cell equipped with a boron doped diamond (BDD) anode. This preliminary study demonstrates that a flow cell with a micrometric distance between the cathode and the anode can be used to perform the electrochemical treatment of waters contaminated by organic pollutants in the absence of added supporting electrolytes with high abatements. The effect of the distance between the cathode and the anode, the flow rate and the current density on the abatement of oxalic acid and on the current efficiency was in particular studied.
Advances in Design, Simulation and Manufacturing IV
2021
This book reports on topics at the interface between mechanical and chemical engineering, emphasizing design, simulation, and manufacturing. Specifically, it covers recent developments in the mechanics of solids and structures, numerical simulation of coupled problems, including fatigue, fluid behavior, particle movement, pressure distribution. Further, it reports on developments in chemical process technology, heat and mass transfer, energy-efficient technologies, and industrial ecology. Based on the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2021), held on June 8-11, 2021, in Lviv, Ukraine, this second volume of a 2-volume set provide…
Start-Up of Chitosan-Assisted Anaerobic Sludge Bed Reactors Treating Light Oxygenated Solvents under Intermittent Operation
2021
Quality of the granular sludge developed during the start-up of anaerobic up-flow sludge bed reactors is of crucial importance to ensure the process feasibility of treating industrial wastewater such as those containing solvents. In this study, the microbial granule formation from suspended-growth biomass was investigated in two chitosan-assisted reactors. These reactors operated mimicking industrial sites working with night closures treating a mixture of ethanol, ethyl acetate, and 1-ethoxy-2-propanol. Each reactor operated under different hydrodynamic regimes typical from UASB (R1: <
Suspected-screening assessment of the occurrence of organic compounds in sewage sludge
2021
The profiling of emerging organic pollutants present in sludge and generated during wastewater treatment is much more limited than in water. This is mainly due to the difficulty of sludge analysis because of its high content of organic matter and interfering compounds. In this study, a generic extraction method using a mixture of buffered water (pH 4.1) and solid phase extraction (SPE) clean-up was applied to samples of sludge obtained in different treatment plants. This extraction was followed by determination of the contaminants by ultra-high performance liquid chromatography coupled to high resolution mass spectrometry (UHPLC-HRMS), using suspected screening to detect the most relevant o…
Inoculum of Indigenous Microalgae/Activated Sludge for Optimal Treatment of Municipal Wastewaters and Biochemical Composition of Residual Biomass for…
2022
In this work, municipal wastewater was treated with microalgal/activated sludge consortia. We aimed at obtaining a positive interaction between the microalgae and the heterotrophic bacteria and identifying the best combination for bioremediation purposes. A strain of Chlorella sp CW2 employed in this work was isolated from AS and molecularly characterised in this work for the first time. This strain and another previously isolated strain (Chlorella sp Pozzillo) were inoculated alone and in combination with AS in different ratios in wastewaters. Microalgae/activated sludge growth curves were obtained by using a UV–vis spectrophotometer and a fluorimeter to distinguish the contribution of the…
Experimental study of the anaerobic urban wastewater treatment in a submerged hollow-fibre membrane bioreactor at pilot scale
2011
The aim of this study was to assess the effect of several operational variables on both biological and separation process performance in a submerged anaerobic membrane bioreactor pilot plant that treats urban wastewater. The pilot plant is equipped with two industrial hollow-fibre ultrafiltration membrane modules (PURON¿ Koch Membrane Systems, 30m 2 of filtration surface each). It was operated under mesophilic conditions (at 33°C), 70days of SRT, and variable HRT ranging from 20 to 6h. The effects of the influent COD/SO 4-S ratio (ranging from 2 to 12) and the MLTS concentration (ranging from 6 to 22gL -1) were also analysed. The main performance results were about 87% of COD removal, efflu…
Prediction of BOD5 content of the inflow to the treatment plant using different methods of black box - the case study
2020
The publication presents the possibility of modeling in a 1 d advance of the content of organic compounds in the influent wastewater to the treatment plant, where the content of these compounds is determined by both the biochemical and chemical oxygen demand. To predict the quality of the wastewater at the inflow a set of indicators where used to make measurements on a daily basis. In order to develop statistical models 3 methods where used, namely: multivariate adaptive regression splines (MARS), boosted trees (BT), and genetic programming (GP). The carried-out calculations showed that, to calculate the BOD5 there can only be used models developed on the basis of the value of daily wastewa…
A plant-wide energy model for wastewater treatment plants: application to anaerobic membrane bioreactor technology
2016
[EN] The aim of this study is to propose a detailed and comprehensive plant-wide model for assessing the energy demand of different wastewater treatment systems (beyond the traditional activated sludge) in both steady- and unsteady-state conditions. The proposed model makes it possible to calculate power and heat requirements (W and Q, respectively), and to recover both power and heat from methane and hydrogen capture. In order to account for the effect of biological processes on heat requirements, the model has been coupled to the extended version of the BNRM2 plant-wide mathematical model, which is implemented in DESSAS simulation software. Two case studies have been evaluated to assess t…