Search results for "Water treatment"

showing 10 items of 311 documents

Greenhouse gases from sequential batch membrane bioreactors: A pilot plant case study

2016

Abstract The paper reports the results of nitrous oxide (N 2 O) emissions from aerobic and anoxic tank of a Sequential Batch Membrane Bioreactor (SB-MBR) pilot plant. The influence of salinity variation on N 2 O emission was analyzed by gradually increasing the inlet salt concentration from 0 to 10 g NaCl L −1 . The observed results showed that the N 2 O concentration of the gaseous samples was strongly influenced by the salt concentration. This result was likely related to a worsening of the nitrification activity due to the effect of salinity on autotrophic bacteria. Dissolved oxygen concentration and salinity were found to be the key factors affecting N 2 O concentration in the gaseous s…

Environmental EngineeringEnvironmental preservation0208 environmental biotechnologyBiomedical EngineeringBioengineeringSequencing batch reactorWastewater treatment02 engineering and technology010501 environmental sciencesMembrane bioreactor01 natural scienceschemistry.chemical_compoundBioprocess monitoringBioreactor0105 earth and related environmental sciencesSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleChemistryGlobal warming potentialtechnology industry and agricultureEnvironmental engineeringNitrous oxideAnoxic waters020801 environmental engineeringSequencing batch reactorSalinityPilot plantEnvironmental chemistryMembrane bioreactorNitrificationBioprocess monitoring; Environmental preservation; Global warming potential; Membrane bioreactors; Sequencing batch reactor; Wastewater treatment; Biotechnology; Bioengineering; Biomedical Engineering; Environmental EngineeringBiotechnologyBiochemical Engineering Journal
researchProduct

Monitoring WWTP performance using size-exclusion chromatography with simultaneous UV and fluorescence detection to track recalcitrant wastewater frac…

2018

Abstract A trial monitoring of a typical full-scale municipal WWTP in Central Finland was aimed to explore applicability of high performance liquid chromatography – size exclusion chromatography (HPSEC) with simultaneous UV and fluorescence detection as a tool for advanced routine monitoring of wastewater treatment. High, intermediate, and low molecular weight (MW) fractions of untreated wastewater (influent) and treated wastewater (secondary effluent) were characterized in terms of UV absorbance at 254 nm (UVA254) and specific fluorescence representing tyrosine-like, tryptophan-like, and humic/fulvic-like compounds. The activated sludge treatment removed 97 ± 1% of BOD, 93 ± 2% of COD, 71 …

Environmental EngineeringHealth Toxicology and Mutagenesis0208 environmental biotechnologySize-exclusion chromatographyta117202 engineering and technologyjätevesiWastewater010501 environmental sciences01 natural sciencesHigh-performance liquid chromatographyWater Purificationwastewater characterizationWater SupplyEnvironmental ChemistryOrganic ChemicalsEffluentChromatography High Pressure LiquidFinlandActivated sludge system0105 earth and related environmental sciencesjäteveden käsittelyChromatographyChemistryPublic Health Environmental and Occupational HealthUV absorptionGeneral MedicineGeneral Chemistrymolecular weight distributionPollutionFluorescence020801 environmental engineeringsize-exclusion chromatographywastewater treatmentSpectrometry FluorescenceWastewaterChromatography GelMolar mass distributionSpectrophotometry UltravioletSewage treatmentfluorescenceWater Pollutants ChemicalEnvironmental MonitoringChemosphere
researchProduct

Performance evaluation of a biotrickling filter treating a mixture of oxygenated VOCs during intermittent loading

2008

Laboratory scale-studies on the biodegradation of a 1:1:1 weight mixture of three oxygenated volatile organic compounds (VOCs), ethanol, ethyl acetate, and methyl-ethyl ketone (MEK) in a biotrickling filter (BTF) were carried out using two identically sized columns, filled with different polypropylene rings. The performance of the BTFs was examined for a period of 10 months applying several operational strategies. Similar performance was obtained for both supports. Intermittent flow rate of trickling liquid was shown beneficial to improve the removal efficiency (RE). Continuous feeding of VOC resulted in an excessive accumulation of biomass so high pressure drop was developed in less than 2…

Environmental EngineeringHealth Toxicology and MutagenesisEthyl acetateAcetateschemistry.chemical_compoundAir PollutionBioreactorEnvironmental ChemistryVolatile organic compoundchemistry.chemical_classificationAir PollutantsVolatile Organic CompoundsChromatographyEthanolDrop (liquid)Public Health Environmental and Occupational HealthGeneral MedicineGeneral ChemistryBiodegradationPollutionButanonesVolumetric flow rateOxygenBiodegradation EnvironmentalchemistryBiofilterWater treatmentFiltrationWater Pollutants ChemicalChemosphere
researchProduct

Performances of a granular sequencing batch reactor (GSBR).

2007

Aerobic granulation in sequencing batch reactors is widely reported in literature and in particular in SBAR (Sequencing batch airlift reactor) configuration, due to the high localised hydrodynamic shear forces that occur in this type of configuration. The aim of this work was to observe the phenomenon of the aerobic granulation and to confirm the excellent removal efficiencies that can be achieved with this technology. In order to do that, a laboratory-scale plant, inoculated with activated sludge collected from a conventional WWTP, was operated for 64 days: 42 days as a SBAR and 22 days as a SBBC (sequencing batch bubble column). The performances of the pilot plant showed excellent organic…

Environmental EngineeringMaterials scienceNitratesSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleBacteriaSettling timebusiness.industryGranule (cell biology)Sequencing batch reactorGranular Sludge SBR wastewater treatmentWaste Disposal FluidAerobiosisQuaternary Ammonium CompoundsPilot plantActivated sludgeBioreactorsAerobic granulationSewage treatmentExperimental workProcess engineeringbusinessWater Pollutants ChemicalWater Science and TechnologyWater science and technology : a journal of the International Association on Water Pollution Research
researchProduct

A survey of photocatalytic materials for environmental remediation

2012

Abstract Heterogeneous photocatalysis is an advanced oxidation process which has been the subject of a huge amount of studies related to air cleaning and water purification. All these processes have been carried out mainly by using TiO 2 -based materials as the photocatalysts and ca. 75% of the articles published in the last 3 years is related to them. This review illustrates the efforts in the search of alternative photocatalysts that are not based on TiO 2 , with some exceptions concerning particularly innovative modifications as nanoassembled TiO 2 or TiO 2 composites with active carbon, graphite and fullerene. Papers reporting preparation, characterization and testing of binary, ternary…

Environmental EngineeringMaterials scienceUltraviolet RaysEnvironmental remediationHealth Toxicology and MutagenesisPortable water purificationNanotechnologyCatalysisEnvironmental ChemistryGraphiteWaste Management and DisposalEnvironmental Restoration and RemediationTitaniumNanotubes CarbonAdvanced oxidation processOxidesMineralization (soil science)Photochemical ProcessesPollutionNanostructuresCharacterization (materials science)Environmental chemistryHeterogeneous photocatalysis photocatalysts not based on TiO2PhotocatalysisEnvironmental PollutantsWater treatmentSettore CHIM/07 - Fondamenti Chimici Delle Tecnologie
researchProduct

Wastewater treatment and reclamation : A review of pulp and paper industry practices and opportunities

2016

The pulp and paper (P&P) industry worldwide has achieved substantial progress in treating both process water and wastewater, thus limiting the discharge of pollutants to receiving waters. This review covers a variety of wastewater treatment methods, which provide P&P companies with cost-effective ways to limit the release of biological or chemical oxygen demand, toxicity, solids, color, and other indicators of pollutant load. Conventional wastewater treatment systems, often comprising primary clarification followed by activated sludge processes, have been widely implemented in the P&P industry. Higher levels of pollutant removal can be achieved by supplementary treatments, which…

Environmental EngineeringMaterials sciencelcsh:BiotechnologyACTIVATED-SLUDGE TREATMENTBioengineeringDISSOLVED-AIR FLOTATIONWastewater treatment02 engineering and technology010501 environmental sciencesWHITE-ROT FUNGI01 natural sciencesMILL EFFLUENT TREATMENTCHLORINATED ORGANIC-COMPOUNDS12. Responsible consumptionLand reclamationlcsh:TP248.13-248.65Bioreactoractivated sludgeadvanced oxidationMembrane technologiesWaste Management and DisposalEffluent0105 earth and related environmental sciencesmembrane technologiesPollutantBLEACHED KRAFT MILLpulp and paper manufacturingPulp and paper manufacturingWaste managementChemical oxygen demand021001 nanoscience & nanotechnologyPulp and paper industry6. Clean waterClarificationwastewater treatmentActivated sludgeWastewaterCATALYTIC WET OXIDATIONActivated sludge13. Climate actionANAEROBIC MEMBRANE BIOREACTORSAdvanced oxidationGREENHOUSE-GAS EMISSIONclarificationSewage treatment0210 nano-technologyMOLECULAR-WEIGHT DISTRIBUTION
researchProduct

Continuous monitoring of photocatalytic treatment by flow injection. Degradation of dicamba in aqueous TiO2 dispersions

2001

The possible use of flow injection (FI) to monitor the photocatalytic mineralization of dicamba (3,6-dichloro-2-methoxybenzoic acid) present at the trace level in aqueous solutions containing TiO2 suspensions has been evaluated. Experiments were performed in a stirred photochemical reactor equipped with a simple FI manifold, integrating an online filtration unit able to perform the monitoring of the UV absorbance of the irradiated solution every 4 min. The light source used was a medium pressure mercury lamp (125 W). During the initial steps of the reaction the formation of UV absorbing intermediates, which completely disappear in less than 80 min, was evidenced. Additional HPLC, DOC and ch…

Environmental EngineeringPhotochemistryUltraviolet RaysHealth Toxicology and MutagenesisChlorideMineralization (biology)Catalysislaw.inventionOxidants PhotochemicallawmedicineEnvironmental ChemistryIrradiationFiltrationTitaniumAqueous solutionChromatographyHerbicidesChemistryWater PollutionDicambaPublic Health Environmental and Occupational HealthGeneral MedicineGeneral ChemistryPollutionPhotocatalysisDegradation (geology)Water treatmentWater Pollutants Chemicalmedicine.drug
researchProduct

Marginal abatement cost of carbon dioxide emissions in the provision of urban drinking water

2021

Abstract Reducing greenhouse gas emissions is a major challenge faced by cities seeking to improve their environmental sustainability. Doing so requires a good understanding of the costs associated with lowering emissions and factors that may influence this cost. This study estimated the marginal abatement cost of reducing both direct and indirect CO2 emissions in the provision of drinking water by several water companies in England and Wales. The results indicated that during the years 2013–2018, the average cost to the English and Welsh water industry to prevent 1 kg of CO2 emissions was 0.264₤ which was equivalent to 61% of the price of the delivered drinking water The results of the Mor…

Environmental EngineeringRenewable Energy Sustainability and the Environmentbusiness.industryElasticity of substitution020209 energyEnvironmental engineering02 engineering and technologyWater industry010501 environmental sciences01 natural sciencesIndustrial and Manufacturing Engineeringchemistry.chemical_compoundchemistryGreenhouse gasCarbon dioxideSustainability0202 electrical engineering electronic engineering information engineeringEnvironmental ChemistryEnvironmental scienceWater treatmentbusinessMarginal abatement costhealth care economics and organizationsAverage cost0105 earth and related environmental sciencesSustainable Production and Consumption
researchProduct

Biological Nutrient Removal and Fouling Phenomena in a University of Cape Town Membrane Bioreactor Treating High Nitrogen Loads

2013

The behavior of a University of Cape Town (UCT) membrane bioreactor (MBR) system was investigated for use in biological nutrient removal from real wastewater. The pilot plant was in operation for a period of 165 days, during which an extensive data gathering campaign was conducted. The pilot plant was started up by inoculating it with activated sludge from a nearby wastewater treatment plant, and it was fed by real municipal wastewater characterized by high organic nitrogen concentrations attributable to discharges from industrial wastewater and sporadic landfill leachate. Carbon and biological nutrient removal processes, a sludge production process, and a membrane fouling mechanism were an…

Environmental EngineeringSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleMembrane foulingEnvironmental engineeringMembrane bioreactorIndustrial wastewater treatmentPilot plantActivated sludgeWastewaterEnvironmental ChemistryEnvironmental scienceSewage treatmentLeachateEnvironmental issues Regulations Fouling Nutrient loads Abatement and removal Waste treatmentGeneral Environmental ScienceCivil and Structural EngineeringJournal of Environmental Engineering
researchProduct

Nutrient recovery from wastewater treatment by ultrafiltration membrane for water reuse in view of a circular economy perspective

2022

The study aims to recover nitrogen from wastewater by employing ultrafiltration membrane in water reuse for agriculture purpose. To such aim, a new reclaimed water quality index (RWQI) is proposed and applied including an innovative protocol for its assessment. Specifically, the influence of filtration and backwashing times for an ultrafiltration system aimed to nutrient recovery has been analyzed. The final goal was to pin down the trade-off between operation costs and effluent quality. Results show that backwashing time play a crucial role in reducing the operation costs; indeed, low values (i.e., 0.5 min) lead to an increase in the number of required chemical cleanings and consequently o…

Environmental EngineeringSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleNitrogenRenewable Energy Sustainability and the EnvironmentReclaimed water quality indexUltrafiltrationMembranes ArtificialBioengineeringFoulingUltrafiltration membraneWastewater treatmentNutrientsGeneral MedicineWastewaterSettore MED/42 - Igiene Generale E ApplicataWaste Disposal FluidWater PurificationNutrients recoveryWaste WaterWaste Management and DisposalBioresource Technology
researchProduct